{"title":"Active - Custom Freight","description":null,"products":[{"product_id":"dril-quip-45-hollow-spindle-hydraulic-rotary-table-quickdrill-mark-ii-control-hydraulic-power-unit-0226-320","title":"Dril-Quip Hollow Spindle Hydraulic Rotary Table 45 in Quickdrill Mark II Control Hydraulic Power Unit","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Dril-Quip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Rotary Table System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Plate Diameter:\u003c\/strong\u003e 45 in (tape measured)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChuck Configuration:\u003c\/strong\u003e 4-jaw independent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Hydraulic, dedicated hydraulic power unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Dril-Quip Quickdrill Mark II control panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Industrial floor-mounted base with integrated lifting eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Surplus - Untested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis Dril-Quip hydraulic rotary table system is a complete, self-contained package built for heavy-duty oilfield and industrial tubular handling. It consists of the rotary table assembly and its matched hydraulic power unit with integrated controls.\u003c\/p\u003e\n\u003cp\u003eThe table carries a 45 in face plate, tape measured, in a 4-jaw independent configuration, with a heavy-duty enclosed drive housing, an integrated lifting eye and an industrial floor-mounted base.\u003c\/p\u003e\n\u003cp\u003eThe hydraulic power unit sits on a fork-liftable diamond plate skid and carries the Dril-Quip Quickdrill Mark II control panel, with push-button controls for clockwise and counter-clockwise rotation, speed control, an operating mode selector, zero and dump functions and an emergency stop. The unit includes an electric motor driven hydraulic pump with pressure gauge and plumbing.\u003c\/p\u003e\n\u003cp\u003eDril-Quip manufactures oilfield and subsea equipment. A table of this type suits pipe handling, casing work, tubular make-up and break-out, and similar heavy rotation applications.\u003c\/p\u003e\n\u003cp\u003eSold as surplus, untested, and as shown in the photos. Buyers matching this table for replacement or spare inventory should confirm the face plate diameter, the spindle bore and the control configuration against their existing setup. Buyer is responsible for inspection, rigging and removal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-320\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dril-Quip","offers":[{"title":"Default Title","offer_id":48822899179760,"sku":"m00320","price":19999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/A92F68BB-F461-422B-B387-F72445649654.png?v=1783948894"},{"product_id":"dril-quip-48-hollow-spindle-rotary-table-system-w-hydraulic-power-unit-quickpanel-hmi-control-sn-hsrtb1-0226-323","title":"Dril-Quip HSRTB1 Hollow Spindle Rotary Table System 48 in, Hydraulic Power Unit, QuickPanel HMI","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Dril-Quip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hollow Spindle Rotary Table System\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Number:\u003c\/strong\u003e HSRTB1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDate of Manufacture:\u003c\/strong\u003e June 2005\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 6,840 lb (nameplate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Plate Diameter:\u003c\/strong\u003e Approximately 48 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChuck Configuration:\u003c\/strong\u003e 4-jaw independent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle:\u003c\/strong\u003e Hollow, large center bore\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Hydraulic, dedicated hydraulic power unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e Dril-Quip QuickPanel HMI touchscreen with push-button operator station\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Surplus - Untested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis Dril-Quip hollow spindle rotary table system is a complete, self-contained package consisting of the rotary table assembly and its dedicated hydraulic power unit with integrated control cabinet. The nameplate identifies serial number HSRTB1, a manufacture date of June 2005, and a weight of 6,840 lb.\u003c\/p\u003e\n\u003cp\u003eThe rotary table carries a large diameter face plate, approximately 48 in, in a 4-jaw independent configuration with a large hollow center bore for pipe and tubular work. Construction is heavy cast iron to oilfield standards, and the table is drive-connected to its hydraulic power unit.\u003c\/p\u003e\n\u003cp\u003eThe hydraulic power unit and control cabinet are mounted on a heavy-duty fork-liftable diamond-plate skid with a lifting eye for crane handling. Controls include a Dril-Quip branded QuickPanel HMI touchscreen, push-button operator controls for zero, mode, drill and stop, dump, clockwise and counter-clockwise rotation and speed, and a red emergency stop. The pump and motor assembly and hydraulic line connections are integrated into the same skid.\u003c\/p\u003e\n\u003cp\u003eSystems of this type are used for pipe rotation, casing make-up and break-out, and tubular handling in oilfield tubular running operations, pipe shop work, workover operations and casing inspection facilities. Dril-Quip manufactures subsea and surface wellhead equipment and specialty oilfield tools.\u003c\/p\u003e\n\u003cp\u003eSold as surplus, untested. Buyers matching this system for replacement or spare inventory should confirm the serial number and the required face plate diameter and bore against their existing setup. Buyer is responsible for inspection, rigging and removal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-323\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dril-Quip","offers":[{"title":"Default Title","offer_id":48822993682672,"sku":"m00323","price":19999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/B9E5F92F-FF80-46D5-BB32-341ED16B68C0.jpg?v=1772124826"},{"product_id":"miller-electric-dc-arc-welding-power-source-gold-star-300ss-0326-353","title":"Miller Electric Gold Star 300SS DC Arc Welding Power Source","description":"\u003cp\u003eUsed in industrial fabrication and maintenance shops requiring a robust constant current DC welding platform, the Miller Gold Star 300SS is a transformer-based DC arc welding power source rated at 13 kW. Input voltage is 200\/230\/460V at 69\/60\/30 amperes respectively, three phase, 60 Hz. The unit carries serial number KA8.25828 and stock number 902268-01-2 as visible on the nameplate. Rated output is 300 amperes DC at a 32V output voltage. The Gold Star 300SS supports stick (SMAW) and TIG (GTAW) welding processes in constant current mode, making it compatible with a wide range of electrode types and materials. Front panel controls include a range switch, amperage adjustment dial spanning low and high ranges, arc control, remote receptacle, output contactor switch, and a power on\/off switch. The unit is mounted on a wheeled cart for portability within a facility. Stacked on top of the power source is a Miller Radiator-1 water cooler unit, visible in the photos, which is included with this lot. The nameplate label warns that evidence of tampering voids warranty. Input and output specifications are sourced directly from the visible nameplate. Miller Electric is a premium brand in the North American welding equipment market, known for industrial-grade transformer and inverter welding machines.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-353\u003c\/p\u003e","brand":"Miller Electric","offers":[{"title":"Default Title","offer_id":48823154737392,"sku":"m00353","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/0AE8A32A-1574-4223-B5E9-81EA80DE2859.png?v=1783953118"},{"product_id":"rotary-index-table-019-45623-00-60-in-x-96-in-t-slotted-work-surface-0226-764","title":"Rotary Index Table 60 in x 96 in T-Slotted Cast Iron Work Surface","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Not identified (no builder nameplate present)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rotary Index Table, T-slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e Approximately 60 in x 96 in (tape measured)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork Surface:\u003c\/strong\u003e Cast iron, multiple longitudinal T-slots\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Offset:\u003c\/strong\u003e 29.992 in from the reference offset side to table centerline (per placard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference Placard Number:\u003c\/strong\u003e 019-45623-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Heavy cast base with square lightening pockets around the apron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigging:\u003c\/strong\u003e Lifting eyes on the base casting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServices:\u003c\/strong\u003e Pneumatic fittings and a valve present on the base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Surplus - Untested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis is a large-format T-slotted rotary index table, the kind used on horizontal boring mills, large machining centers and heavy-duty manufacturing cells to provide a stable, repositionable work surface for oversized or high-mass workpieces.\u003c\/p\u003e\n\u003cp\u003eThe cast iron platen measures approximately 60 in by 96 in, tape measured in the photos, with multiple longitudinal T-slots across the full working surface giving a wide range of fixturing positions. The platen sits on a heavy base casting with square lightening pockets cast into the apron perimeter and lifting eyes for rigging.\u003c\/p\u003e\n\u003cp\u003eA reference placard on the side apron reads \"Reference Offset Side, Distance to Table Centerline: 29.992\", and carries the number 019-45623-00 in its corner. That number is the placard's own reference number rather than a confirmed model number for the table. Pneumatic fittings and a valve are present on the base casting.\u003c\/p\u003e\n\u003cp\u003eNo builder nameplate is present on the machine, so the manufacturer, the model, the indexing arrangement, the rotation drive and the load capacity are not identified. Buyers should inspect and confirm the indexing mechanism, the rotation method and the table capacity against their application before ordering.\u003c\/p\u003e\n\u003cp\u003eSold as surplus, untested, and as pictured. Buyer is responsible for inspection, rigging and removal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-764\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unknown","offers":[{"title":"Default Title","offer_id":48919271571696,"sku":"m00764","price":9999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/F52BA6A4-8FD4-4BDA-9E30-D0C91BA9F400.png?v=1784654252"},{"product_id":"pratt-whitney-motorized-rotary-table-36-in-table-diameter-orientation-axial-0226-777","title":"Pratt \u0026 Whitney Motorized Rotary Table 36 in Table Diameter Axial","description":"\u003cp\u003eUsed in boring mill and heavy machining setups, a large motorized rotary table with an approximate 36 in. working surface diameter provides powered 360-degree rotation for positioning and indexing large workpieces. The table is equipped with a 4-jaw independent workholding arrangement mounted directly to the faceplate, providing adjustable clamping for irregularly shaped or large-diameter parts. A motor and gearbox assembly is mounted to the base and drives the table through an internal worm gear reduction. The table base shows a painted cast iron construction typical of heavy industrial rotary workholding equipment. An additional handwheel or manual input shaft is visible on one end of the base, allowing manual rotation or fine adjustment independent of the motor drive. This configuration is commonly used on horizontal boring mills, vertical turning centers, and large machining setups where powered rotation and secure workholding of heavy or large-diameter parts is required. The table diameter measures approximately 36 in. as confirmed by visible tape measure. Motor specifications and electrical requirements are not fully legible from available photos. Brand and model number are unable to be confirmed from the visible nameplate. The unit is sold as-is and ships freight.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-777\u003c\/p\u003e","brand":"Pratt \u0026 Whitney","offers":[{"title":"Default Title","offer_id":48919274389744,"sku":"m00777","price":2999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/B91E2E6B-E4AD-4738-959F-C5687F914DF8_20260721184533837.png?v=1784659534"},{"product_id":"villo-industrial-dust-collector-vjf-55-380v-50hz-0226-791","title":"Villo VJF-5.5 Industrial Dust Collector 380V 50 Hz","description":"\u003cp\u003eThe Villo VJF-5.5 is an industrial pulse jet dust collector rated at 5.5 kW, manufactured by Dongguan Villo Technology Inc. The unit carries serial number TV240229001 and is mounted on heavy-duty locking casters for portable, floor-level deployment within a production facility.\u003c\/p\u003e\n\n\u003cp\u003eThe VJF series is designed for multi-motor operation with large air volume capacity and an automatic pulse jet filter cleaning system. The integrated control panel features a Villo-branded digital controller with status indicators, along with a separate operator station housing six push-button controls labeled in Chinese for functions including power indication, run indication, fault indication, emergency stop, start, run, and backflushing. Internal components visible in the electrical compartment include a Mean Well DRH-60-24 DIN-rail power supply, Schneider Electric contactors, terminal blocks, and a custom PCB control module enclosed in a clear-lidded enclosure.\u003c\/p\u003e\n\n\u003cp\u003eThe cabinet is constructed from powder-coated steel sheet metal in a two-section vertical cabinet configuration, with a compressed air regulator assembly visible on the side panel and a circular intake port on the lower housing. Lifting brackets are welded to the top corners of the upper cabinet section.\u003c\/p\u003e\n\n\u003cp\u003eThe nameplate specifies 380V at 50Hz, which is the international standard rather than the US 460V\/60Hz three-phase standard. Buyers should verify electrical compatibility with their facility supply before purchase.\u003c\/p\u003e\n\n\u003cp\u003eThis unit is applicable to grinding, mixing, sandblasting, packaging, and similar processes requiring continuous-duty dust extraction with on-cycle filter regeneration. MPN as designated on the nameplate is VJF-5.5.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-791\u003c\/p\u003e","brand":"Villo","offers":[{"title":"Default Title","offer_id":48919584637168,"sku":"m00791","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/4FC6C9E0-DA18-4148-A0B1-ECF86303C5A3_20260721185547623.png?v=1784660148"},{"product_id":"rotary-index-table-t-slotted-work-surface-72-in-x-48-in-0326-1149","title":"Rotary Index Table 72 in x 48 in T-Slotted Cast Iron Work Surface","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Not identified (no builder nameplate present)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rotary Index Table, T-slotted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size:\u003c\/strong\u003e Approximately 72 in long by 48 in wide (tape measured)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Body Height:\u003c\/strong\u003e Approximately 11 in from base casting to work surface (tape measured)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Slots:\u003c\/strong\u003e 6 parallel slots running the length of the table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Hollow box-section casting with rectangular lightening pockets in the side wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlaten:\u003c\/strong\u003e Central bore with plug in the top surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Large-diameter bearing ring beneath the platen, with two mechanism housings carrying tie rods and levers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Surplus - Untested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis is a heavy-duty rectangular T-slotted rotary index table, the kind used on horizontal boring mill setups, jig boring and heavy-part positioning where a large fixturing area needs to be rotated to a repeatable position.\u003c\/p\u003e\n\u003cp\u003eThe platen measures approximately 72 in long by 48 in wide, tape measured in the photos, with a table body height of approximately 11 in from the base casting to the work surface. Six parallel T-slots run the length of the table, and a plugged central bore sits in the top surface. The end profile shows hollow box-section casting with rectangular lightening pockets cast into the side wall.\u003c\/p\u003e\n\u003cp\u003eBeneath the platen is a large-diameter bearing ring, and the base carries two mechanism housings fitted with tie rods and levers. The photos do not show a power unit, reservoir, pump or fluid lines, so the rotation and indexing method, the number and spacing of index positions, and whether the table is powered or manually positioned are not confirmed.\u003c\/p\u003e\n\u003cp\u003eNo builder nameplate is present on the machine, so the manufacturer, model and load capacity are not identified either. Buyers should inspect and confirm the indexing arrangement, the rotation method and the table capacity against their application before ordering.\u003c\/p\u003e\n\u003cp\u003eSold as surplus, untested, and as pictured. Buyer is responsible for inspection, rigging and removal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0326-1149\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unknown","offers":[{"title":"Default Title","offer_id":49008321921264,"sku":"m01149","price":15999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/A8D3CD2D-F092-4546-B895-A3C18FF46A04_20260723165708755.png?v=1784825829"},{"product_id":"wb-knight-machinery-company-powered-rotary-table-serial-51111-0326-1150","title":"W.B. Knight Machinery Powered Rotary Table","description":"\u003cp\u003eUsed in heavy machining environments alongside horizontal boring mills and large vertical lathes, this W.B. Knight Machinery Company powered rotary table features a cast iron construction with a 4-jaw faceplate configuration and an integral hydraulic power unit with an electric drive motor mounted to the side housing. W.B. Knight was a St. Louis, Missouri machine builder whose rotary tables were recognized for their rigid, accurate construction and were produced under license by John Ramming Machine Company after Mr. Knight's passing.\u003c\/p\u003e\n\n\u003cp\u003eThe faceplate diameter measures approximately 40 in. based on visible tape measure references in the photos. The nameplate, riveted to the teal painted housing, shows Serial Number 51111 and a weight designation of 100, with the W.B. Knight Versatile, Accurate, Rigid shield logo and St. Louis, MO origin. No model number is confirmed from visible markings.\u003c\/p\u003e\n\n\u003cp\u003eThe table body and 4-jaw assemblies show significant surface oxidation consistent with long-term storage. The hydraulic power unit and corrugated conduit runs are intact and present. The rear of the table shows the teal factory paint, hydraulic fittings, and motor connections. This table is a standalone unit resting on integral cast feet. Buyers requiring a powered rotary table for large-format boring, milling, or inspection work will recognize the W.B. Knight name as an established American manufacturer of heavy-duty precision rotary equipment.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1150\u003c\/p\u003e","brand":"W.B. Knight Machinery","offers":[{"title":"Default Title","offer_id":49008365830384,"sku":"m01150","price":4500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/31A096AE-E94E-432E-A203-AE0B60A74305_20260723165709215.png?v=1784825829"},{"product_id":"abb-3glp453510-rdg-ac-motor-800-kw-460v-1494-rpm-horizontal-mounting-imb3-im1001-year-2021","title":"ABB 3GLP453510-RDG AC Induction Motor 800 kW 460V AC 1494 RPM IMB3 Horizontal","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e ABB Oy, IEC LV Motors (Vaasa, Finland)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e M3LP 450LA 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code:\u003c\/strong\u003e 3GLP453510-RDG +VC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3-Phase AC Induction Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Number:\u003c\/strong\u003e 3G1F2124761092\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM \/ Alternate Part Number:\u003c\/strong\u003e 2005681-20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYear of Manufacture:\u003c\/strong\u003e 2021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 460V AC (delta)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 75 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 3-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 800 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1494 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 1326A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Factor:\u003c\/strong\u003e 0.84\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e S9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Class:\u003c\/strong\u003e H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e IP 55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e IMB3 \/ IM1001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Inlet:\u003c\/strong\u003e Closer to N-end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Outlet:\u003c\/strong\u003e Closer to D-end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInlet Water Temperature:\u003c\/strong\u003e 35°C max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Flow:\u003c\/strong\u003e 50 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Pressure:\u003c\/strong\u003e 2 bar min \/ 5 bar max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e 6326M\/C3 (drive end), 6322\/C3VL0241 (non-drive end)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3850 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e IEC 60034-1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ABB M3LP 450LA 6 is a three-phase AC induction motor rated 800 kW at 460V, 75 Hz, with a nameplate speed of 1494 RPM and a full load current of 1326A. The nameplate lists a power factor of 0.84 and S9 duty, which covers non-periodic load and speed variation. Insulation is class H with an IP 55 enclosure, and the motor is configured for horizontal foot mounting per IMB3 \/ IM1001. Bearings are 6326M\/C3 on the drive end and 6322\/C3VL0241 on the non-drive end. Nameplate weight is 3850 kg. Manufactured in 2021 by ABB Oy, IEC LV Motors, Vaasa, Finland, and built to IEC 60034-1.\u003c\/p\u003e\n\u003cp\u003eThe motor is water-cooled. Per the cooling plate, the water inlet sits closer to the non-drive end and the outlet closer to the drive end, with a maximum inlet water temperature of 35°C, a flow rate of 50 L\/min, and water pressure between 2 and 5 bar. A cooling water supply meeting those figures is required for operation at the nameplate rating.\u003c\/p\u003e\n\u003cp\u003eThe 75 Hz nameplate frequency indicates a motor supplied for converter-fed operation rather than direct across-the-line starting. Motors of this size and configuration are typically found on large pumps, compressors, fans, mills, and other continuous-duty process drives where high power density and controlled speed are required.\u003c\/p\u003e\n\u003cp\u003eBuyers matching this ABB M3LP 450LA 6 for replacement or spare inventory should confirm the product code 3GLP453510-RDG +VC, the serial number, and their available cooling water supply against their existing installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-004\u003c\/strong\u003e\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":49494479732976,"sku":"m00004","price":74500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6173.jpg?v=1781543392"},{"product_id":"bosch-rexroth-a10vso71dfr-hydraulic-pump-with-baldor-cem4115t-aaa10vso-drive-280-bar","title":"Bosch Rexroth A10VSO71DFR Hydraulic Pump 280 bar with Baldor 50 HP Motor","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Manufacturer:\u003c\/strong\u003e Bosch Rexroth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e A10VSO71DFR \/ CEM4115T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Type (per plate):\u003c\/strong\u003e AAA10VSO71DFR\/31R-VKC92N00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Material No. (MNR):\u003c\/strong\u003e R902400497\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Serial Number:\u003c\/strong\u003e 44817860\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Date Code (FD):\u003c\/strong\u003e 21W34\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Speed:\u003c\/strong\u003e 1800 min-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Displacement (Vg max):\u003c\/strong\u003e 71 cm3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Pressure Values (per plate):\u003c\/strong\u003e DR 280 bar, FR 14 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Mass:\u003c\/strong\u003e 35 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Origin:\u003c\/strong\u003e Assembled in USA (US-Fountain Inn)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Manufacturer:\u003c\/strong\u003e Baldor-Reliance (Baldor Electric Co., Fort Smith, AR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Model:\u003c\/strong\u003e Super-E CEM4115T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Spec:\u003c\/strong\u003e 12C052Z279G1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Serial Number:\u003c\/strong\u003e C2201261372\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 50 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230\/460 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 116\/58 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1775 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 326TC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e TEFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode Letter:\u003c\/strong\u003e H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Class:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 40C ambient, continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor:\u003c\/strong\u003e 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Factor:\u003c\/strong\u003e 85%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA Nominal Efficiency:\u003c\/strong\u003e 94.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e 6312 drive end, 6311 opposite end (Polyrex EM grease)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter Rating:\u003c\/strong\u003e VPWM inverter ready, CT 6-60 Hz (10:1), VT 3-60 Hz (20:1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsable at 208 V:\u003c\/strong\u003e 126 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsable at 50 Hz:\u003c\/strong\u003e 50 HP, 190\/380 V, 139\/69.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter:\u003c\/strong\u003e Hydac Hycon Division filter assembly; model and element codes faded and not legible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame \/ Skid:\u003c\/strong\u003e Red fabricated steel skid frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Surplus - Untested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eBosch Rexroth hydraulic pump, type AAA10VSO71DFR\/31R-VKC92N00, coupled through a mounting adapter to a Baldor-Reliance Super-E 50 HP motor, model CEM4115T. Both are mounted on a red fabricated steel skid frame with hydraulic hoses, a valve block and a Hydac Hycon Division filter assembly.\u003c\/p\u003e\n\u003cp\u003eThe Rexroth plate lists material number R902400497, serial number 44817860, date code 21W34, 1800 min-1, 71 cm3 maximum displacement, DR 280 bar, FR 14 bar and a mass of 35 kg, and is marked assembled in USA. The Baldor-Reliance nameplate lists spec 12C052Z279G1, serial number C2201261372, 50 HP, 230\/460 V, 116\/58 A, 3 phase, 60 Hz, 1775 RPM, frame 326TC, TEFC, design A, code H, Class F insulation, service factor 1.15, 94.5% NEMA nominal efficiency, and VPWM inverter ready ratings. The motor is marked manufactured in the USA.\u003c\/p\u003e\n\u003cp\u003eSurface corrosion and dirt are visible on the pump housing, and the Hydac filter plate is faded so its codes cannot be read. No reservoir is pictured.\u003c\/p\u003e\n\u003cp\u003eSold as surplus, untested; the motor and pump have not been run or tested by MRO Exchange. Buyers should confirm pump type, port sizes and mounting against their application before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-00264\u003c\/strong\u003e\u003c\/p\u003e","brand":"Bosch Rexroth","offers":[{"title":"Default Title","offer_id":49494488056048,"sku":"m00264","price":7499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/Item264.png?v=1783611070"},{"product_id":"baldor-reliance-150hp-hydraulic-power-unit-with-pump-hydac-filter-cecp4406t-4-4500-psi","title":"Baldor Reliance CECP4406T-4 Hydraulic Power Unit 150 HP 460V AC 3-Phase","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Baldor Reliance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e CECP4406T-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hydraulic Power Unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Series:\u003c\/strong\u003e Super-E Severe Duty XEX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Spec Number:\u003c\/strong\u003e A44-5421-1778\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Serial Number:\u003c\/strong\u003e A2112072049\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Power:\u003c\/strong\u003e 150 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 460V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 3-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 169 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1785 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 445TC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e TEFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Class:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor:\u003c\/strong\u003e 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature:\u003c\/strong\u003e 40 C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Factor:\u003c\/strong\u003e 86\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEMA Nominal Efficiency:\u003c\/strong\u003e 95.8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4 Load Efficiency:\u003c\/strong\u003e 96.1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuaranteed Efficiency:\u003c\/strong\u003e 95\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Corrective kVAR:\u003c\/strong\u003e 30.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Location Rating:\u003c\/strong\u003e Class I Div. 2 Groups A, B, C, D, T Code T3; Class I Zone 2 Groups IIA, IIB, IIC, T = 200 C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverter Duty at 1.0 S.F.:\u003c\/strong\u003e CHP 60-90 Hz, CT 15-60 Hz, VT 0-60 Hz; inverter T code T3; VPWM inverter with 2 kHz minimum carrier frequency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e D.E. 6318 \/ 90BC03J30X, O.D.E. 6318 \/ 90BC03J30X, lubricated with Exxon Polyrex EM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Weight:\u003c\/strong\u003e 2138 lbs (nameplate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlant:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA (Ft. Smith, AR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Type:\u003c\/strong\u003e AA10VSO140DRG\/31R-VKD62N00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Serial Number:\u003c\/strong\u003e 393909\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Manufacturer:\u003c\/strong\u003e HYDAC, Hycon Division, Bethlehem, PA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter MAWP:\u003c\/strong\u003e 4500 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Surplus - Untested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis is a Baldor Reliance CECP4406T-4 hydraulic power unit. The motor nameplate reads BALDOR RELIANCE Super-E Severe Duty XEX, Baldor Electric Co., Ft. Smith, AR, Mfg. in U.S.A., CAT NO. CECP4406T-4, SPEC NO. A44-5421-1778, HP 150, AMPS 169, VOLTS 460, DESIGN B, FRAME SIZE 445TC, RPM 1785, HZ 60, AMB 40 C, SF 1.15, PH 3, DUTY CONT, INSUL CLASS F, TYPE P, ENCL TEFC, CODE F, POWER FACTOR 86, NEMA NOM EFFICIENCY 95.8, GUARANTEED EFFICIENCY 95, 3\/4 LOAD EFF. 96.1, MAX CORR KVAR 30.0, SER. NO. A2112072049, MOTOR WEIGHT 2138 LBS, and PLANT 12. The plate also shows the hazardous location and inverter duty ratings listed above and CSA and Energy Verified marks. A separate plate reads LUBRICATED WITH EXXON POLYREX EM.\u003c\/p\u003e\n\u003cp\u003eA second plate reads HYDAC Hycon Division, Bethlehem, PA, with Filter Assembly Model Code DFBH\/HC660 and Element Model Code 0660 D 010. The rest of both model codes and the PSI date are faint and not readable, so they are not listed. It reads MAWP 4500 PSI. That figure is the filter plate rating only and is not a stated working pressure for the pump or the unit. A third plate reads Type: AA10VSO140DRG\/31R-VKD62N00, S\/N: 393909, with no manufacturer name printed on it.\u003c\/p\u003e\n\u003cp\u003eThe unit is built on a red steel frame with lifting lugs. A large green Baldor Reliance motor is bolted to the frame and is coupled to a black hydraulic pump through a gray bell housing. The pump has hydraulic hoses, a valve block with solenoid valves, and a suction hose with an elbow fitting. A black filter canister is mounted on a bracket at one end of the frame, with a hose and large fittings on top. The motor has a conduit box and gray flexible conduits, and a lifting eye on top. An orange label on the bell housing reads PUMP 1. The paint shows some touch-up, and the frame and motor show light wear.\u003c\/p\u003e\n\u003cp\u003eSold as surplus, untested. This unit has not been powered on or tested by MRO Exchange, and the motor, pump, valves and filter have not been verified. No pump flow or system pressure rating is confirmed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-00265\u003c\/strong\u003e\u003c\/p\u003e","brand":"Baldor Reliance \/ HYDAC","offers":[{"title":"Default Title","offer_id":49494488088816,"sku":"m00265","price":24999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/Item265_93251a2d-745e-473f-a847-f3a0175175eb_20260709152927094.png?v=1783610968"},{"product_id":"siemens-ac-induction-motor-1le15233ab490fb4-z-200-hp-1800-rpm","title":"Siemens 1LE15233AB490FB4-Z AC Induction Motor 200 HP 1791 RPM 480V AC IMB5","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Siemens (D-90441 Nürnberg, made in Czech Republic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e 1LE15233AB490FB4-Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 1CV3314B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrder \/ Serial Reference:\u003c\/strong\u003e UC 2208\/318275201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e 3-Phase AC Induction Motor, force ventilated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 200 HP \/ 150 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 480V AC delta\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 215A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 1791 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Factor:\u003c\/strong\u003e 0.87\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Efficiency:\u003c\/strong\u003e 96.2%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor:\u003c\/strong\u003e 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous, NEMA MG1, Design A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e IEC\/EN 60034, 315L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e IMB5 (flange mount)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e IP55, TEFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e IC416, forced ventilation by separately driven blower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlower Motor:\u003c\/strong\u003e Siemens 1LE10030DA222KB4-Z, type 1AV3082A, 1.0 HP, 80M frame, IMB14, IP65, 460V AC 3-phase 60 Hz at 1.63A, 3450 RPM, TEAO, IE3, 12 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e Thermal class 155 (F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Range:\u003c\/strong\u003e -20°C to 40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearings:\u003c\/strong\u003e DE 6319-C3, NE 6319-C3, UNIREX-N3 grease, 40 g per bearing, 6,000 hour relubrication interval\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,070 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency Class:\u003c\/strong\u003e IE3, NEMA Premium (CC 032A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL, CSA, CE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Nameplate Codes:\u003c\/strong\u003e MP150.0\/266, 12-12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Inspected Surplus - Appears Unused\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe Siemens 1LE15233AB490FB4-Z is a 200 HP three-phase AC induction motor rated 480V delta, 60 Hz, 215A, at a nameplate speed of 1791 RPM. Nominal efficiency is 96.2% with a power factor of 0.87 and a 1.15 service factor on continuous duty to NEMA MG1, Design A. The motor is built on an IEC 315L frame, flange mounted per IMB5, with an IP55 TEFC enclosure and an ambient range of -20°C to 40°C. Insulation is thermal class 155, which is class F. Nameplate weight is 1,070 kg. It carries IE3 and NEMA Premium efficiency classification under CC 032A, with UL, CSA and CE marks, and is made in the Czech Republic.\u003c\/p\u003e\n\u003cp\u003eThis unit is force ventilated rather than self-cooled. The main nameplate carries the IC416 cooling code, and a separately driven blower is mounted on the fan end. The blower is a Siemens 1LE10030DA222KB4-Z, type 1AV3082A, rated 1.0 HP on an 80M frame, IMB14 mounted, IP65, drawing 1.63A at 460V three-phase 60 Hz and running at 3450 RPM, TEAO enclosure, IE3, 12 kg. Forced ventilation allows the motor to hold rated torque at low speed on an inverter, and the blower requires its own supply and starter separate from the main motor.\u003c\/p\u003e\n\u003cp\u003eBoth bearings are 6319-C3, greased with UNIREX-N3 at 40 g per bearing on a 6,000 hour relubrication interval. The motor is supplied in its original crate on VCI packaging with the shaft protected.\u003c\/p\u003e\n\u003cp\u003eBuyers matching this Siemens motor for replacement or spare inventory should confirm the full order code 1LE15233AB490FB4-Z, the IMB5 flange dimensions, and the blower supply requirement against their existing installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-322\u003c\/strong\u003e\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":49494490874096,"sku":"m00322","price":17499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/s-l1600_1_11cf81ca-5efc-4f24-b2c6-d2715c5577b8.png?v=1784035299"},{"product_id":"ge-fanuc-cnc-rotary-positioner-headstock-series-18i-t-01376","title":"GE Fanuc Series 18i-T CNC Rotary Positioner Headstock 48 in 4-Jaw Chuck","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e GE Fanuc Series 18i-T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e CNC Rotary Positioner Headstock with Control Cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate Diameter:\u003c\/strong\u003e Approximately 48 in (tape measured)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChuck Configuration:\u003c\/strong\u003e 4-jaw independent, T-slotted faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle:\u003c\/strong\u003e Through-bore, large circular bolt pattern on the rear of the casting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Controls:\u003c\/strong\u003e Alphanumeric MDI keyboard, machine function keypad, emergency stop, CNC ON \/ CNC OFF, PRG EDIT keyswitch, Fanuc feedrate override dial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Accumulator:\u003c\/strong\u003e Parker A4N0231D1KGRG, serial 769257-003-001, 231 cu in, 3,000 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e Bucher Hydraulics (Grand Rapids, MI), electric motor driven, mounted to the cabinet base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Transformer:\u003c\/strong\u003e Beaver Electrical Machinery Ltd. B6HM, serial A 0492, 6.0 kVA, 3-phase, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer Voltage:\u003c\/strong\u003e HV 480V delta (H1-H2-H3), LV 208Y\/120V (X0-X1-X2-X3), taps at 105%, 100% and 95%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer Detail:\u003c\/strong\u003e Type ANN, enclosure CSA-2, 8.5% impedance, insulation class 220, 150°C temperature rise, 170°C AT, 105 lb, CSA LR34493\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Interface:\u003c\/strong\u003e EPIC heavy-duty rectangular connectors, connector pocket labelled URT2-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Anaconda Sealtite flexible conduit throughout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet:\u003c\/strong\u003e Freestanding steel enclosure on a wheeled base with leveling feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Surplus - Untested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis CNC rotary positioner headstock ships as a two-piece system: the headstock itself and a separate freestanding control cabinet, connected by a bundled cable and hose harness. It suits large-part turning, positioning and heavy industrial machining where a programmable rotary axis is needed.\u003c\/p\u003e\n\u003cp\u003eThe headstock carries a T-slotted faceplate measuring approximately 48 in across by tape, in a 4-jaw independent configuration with adjustable clamp blocks. The rear of the casting shows a large circular bolt pattern consistent with a through-bore spindle mount, and the housing carries a lifting eye rated for the assembly.\u003c\/p\u003e\n\u003cp\u003eControl is by a GE Fanuc Series 18i-T with a full alphanumeric MDI keyboard, a machine function keypad, emergency stop, CNC ON and CNC OFF pushbuttons, a program edit keyswitch and a Fanuc feedrate override dial. The cabinet sits on a wheeled base with leveling feet.\u003c\/p\u003e\n\u003cp\u003eHydraulics are supplied by a Bucher Hydraulics power unit mounted to the cabinet base and driven by an electric motor, with a Parker accumulator model A4N0231D1KGRG, serial 769257-003-001, rated 231 cubic inches at 3,000 PSI. Machine power is conditioned by a Beaver Electrical Machinery isolation transformer, catalog B6HM, serial A 0492, rated 6.0 kVA three phase at 60 Hz, 480V delta primary to 208Y\/120V secondary, with 105%, 100% and 95% taps, 8.5% impedance, class 220 insulation and a 150°C rise. The transformer is CSA certified under LR34493 and weighs 105 lb.\u003c\/p\u003e\n\u003cp\u003eMachine interface is through EPIC heavy-duty rectangular connectors, with one connector pocket on the headstock labelled URT2-1. Wiring runs in Anaconda Sealtite flexible conduit. No machine builder nameplate is present on the assembly, so the original OEM and the spindle bore dimension are not identified.\u003c\/p\u003e\n\u003cp\u003eSold as surplus, untested. Buyers should confirm the faceplate dimensions, the spindle bore, the control configuration and the required supply voltage against their application before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0426-01376\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49571280748784,"sku":"m01376","price":14999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/7E0829E4-852F-49C6-B8C0-44F307D4E9F2_20260723193100099.png?v=1784835060"},{"product_id":"siemens-torque-motor-1fw3285-3ej65-5dp0-z-variable-variable-rpm-01416","title":"Siemens 1FW3285-3EJ65-5DP0-Z Torque Motor Inspected Surplus - Appears Unused","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Siemens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e 1FW3285-3EJ65-5DP0-Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Complete Torque Motor, Permanently Excited Synchronous Direct-Drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e SIMOTICS T-1FW3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 285\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Water-Cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Type:\u003c\/strong\u003e Inverter Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Converter:\u003c\/strong\u003e SINAMICS S120 or Compatible Siemens Converter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Number:\u003c\/strong\u003e YF P9642 7709 01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariant:\u003c\/strong\u003e Z (Special Customer-Specified Configuration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (per crate label):\u003c\/strong\u003e 1,006.8 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDate on Crate Label:\u003c\/strong\u003e 29 September 2022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Germany (marked Made in Germany on crate label)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL, CE, EAC (marks shown on crate label)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Inspected Surplus - Appears Unused\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe Siemens 1FW3285-3EJ65-5DP0-Z is a SIMOTICS T-1FW3 complete torque motor, a permanently excited synchronous direct-drive motor designed for high-torque, low-speed rotary axis applications. The 1FW3 series motors are water-cooled and built for demanding industrial environments including metal forming, plastics processing, marine systems, and the process industry. These motors are direct drives, eliminating the need for gearboxes, belts, or hydraulic assemblies, which reduces mechanical backlash and maintenance requirements while increasing drive train stiffness and positional accuracy.\u003c\/p\u003e\n\u003cp\u003eThis unit carries the 285 frame designation and is marked Electric Motor - Inverter Duty on the crate label, intended for use with SINAMICS S120 or compatible Siemens converter systems. The crate label shows the date 29 September 2022, the Siemens AG address in Bad Neustadt a.d. Saale, Germany, and the marking Made in Germany, along with UL, CE and EAC marks. Weight per the crate label is 1,006.8 kg. Serial number YF P9642 7709 01 is shown on the crate label. The part number suffix Z indicates a special variant with customer-specified configuration. The mounting set includes a torque arm, clamping element, and centering sleeve.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0526-01416\u003c\/strong\u003e\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":49769640755440,"sku":"m01416","price":11499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/6C599D12-5EA3-40DC-9BF7-4E9902419526.png?v=1784909160"},{"product_id":"teco-westinghouse-ac-motor-epy4008-400-hp-900-rpm-01706","title":"TECO Westinghouse EPY4008 AC Induction Motor 400 HP 900 RPM Factory Sealed","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e TECO-Westinghouse Motor Company\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e EPY4008\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e AC Motor, Keyless Shaft, Severe Duty, TEFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e MAX-E1 NEMA Premium Efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType Code:\u003c\/strong\u003e AEHH-SY\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Number:\u003c\/strong\u003e YH.FC22B617T1-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 400 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 460V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 3-Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e 478A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 893 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoles:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode Letter:\u003c\/strong\u003e G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Factor:\u003c\/strong\u003e 1.15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Efficiency:\u003c\/strong\u003e 95%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Efficiency:\u003c\/strong\u003e 94.1%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e TEFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Class:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature:\u003c\/strong\u003e 40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD.E. Bearing:\u003c\/strong\u003e 6330C3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5,896 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM VFD Duty Service Factor:\u003c\/strong\u003e 1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Location Rating:\u003c\/strong\u003e CSA certified 171832 — Class I Division 2 Groups B, C and D; Class I Zone 2 Groups IIB+H2, IIB and IIA; Class II Division 2 Groups F and G; Class II Zone 22 Groups IIIB and IIIA; Temp Code T3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Manufacture:\u003c\/strong\u003e Made in Taiwan (TECO-Westinghouse Motor Company, Round Rock, Texas)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Factory Sealed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TECO-Westinghouse EPY4008 is a 400 HP, 893 RPM, 460V, 3-phase, 8-pole TEFC AC induction motor from the MAX-E1 NEMA Premium Efficiency severe duty line. It carries the AEHH-SY type designation, which identifies the keyless shaft configuration of the MAX-E1 family. The nameplate lists 478A full load current, a 1.15 service factor, nominal efficiency of 95% and minimum efficiency of 94.1%, with Class F insulation, NEMA Design B, a 40°C ambient rating and continuous duty. Drive end bearing is 6330C3. Nameplate weight is 5,896 lb.\u003c\/p\u003e\n\u003cp\u003eA second nameplate certifies this unit for hazardous locations under CSA file 171832: Class I Division 2 Groups B, C and D, Class I Zone 2 Groups IIB+H2, IIB and IIA, Class II Division 2 Groups F and G, and Class II Zone 22 Groups IIIB and IIIA, with a T3 temperature code under both sine power and PWM inverter supply. The main nameplate also carries a PWM VFD duty block listing a 1.0 service factor on inverter power.\u003c\/p\u003e\n\u003cp\u003eSerial number YH.FC22B617T1-1 appears on both the main nameplate and the hazardous location plate. The motor is factory sealed in its original crate with the protective wrap intact.\u003c\/p\u003e\n\u003cp\u003eBuyers matching this EPY4008 for replacement or spare inventory should confirm the catalog number, the AEHH-SY type designation, the serial number and the required hazardous location classification against their existing installation. Motors at this rating are typically found on large fans, blowers, compressors, pumps, crushers and mixers in petrochemical, pulp and paper, and other severe duty environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0526-01706\u003c\/strong\u003e\u003c\/p\u003e","brand":"TECO Westinghouse","offers":[{"title":"Default Title","offer_id":49848848580848,"sku":"m01706","price":63999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m01706.png?v=1787848342"},{"product_id":"teco-westinghouse-vertical-hollow-shaft-motor-vstp3006-300-hp-1200-rpm-01707","title":"TECO Westinghouse VSTP3006 Vertical AC Motor 300 HP 1200 RPM 5009 Frame Factory Sealed","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e TECO-Westinghouse Motor Company\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e VSTP3006\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Vertical High Thrust AC Motor, P Base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType Code:\u003c\/strong\u003e AEEHED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 300 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 460V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoles:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynchronous Speed:\u003c\/strong\u003e 1200 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 5009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e TEFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Condensation Heater:\u003c\/strong\u003e 120V, 200W (H1 \/ H2 connection)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Reverse Ratchet (NRR):\u003c\/strong\u003e Installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpper Bearing Lubrication:\u003c\/strong\u003e Oil — turbine oil, 300 SUS at 100°F, 1.8 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Bearing Lubrication:\u003c\/strong\u003e Regreasable — Mobil Polyrex EM, 3.53 oz every 9,000 operating hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Factory Sealed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TECO-Westinghouse VSTP3006 is a 300 HP vertical high thrust AC motor with a P base, rated 460V, 60 Hz, 6-pole, with a synchronous speed of 1200 RPM. It carries the AEEHED type designation and a frame 5009 TEFC enclosure. Motors in this configuration are used on deep well turbine pumps, irrigation, and water and wastewater service.\u003c\/p\u003e\n\u003cp\u003eThe unit is fitted with a non-reverse ratchet and a 120V \/ 200W anti-condensation space heater circuit, which remains live when the motor is switched off. Per the lubrication plate, the upper bearing runs on turbine oil at 300 SUS viscosity at 100°F with a 1.8 gallon fill, changed every six months, and the lower bearing is regreasable with Mobil Polyrex EM at 3.53 oz every 9,000 operating hours. The crate plates also carry the standard cautions for this configuration: the drive end shaft must be kept downward at all times, and power phase sequence must be verified before energizing because of the non-reverse ratchet.\u003c\/p\u003e\n\u003cp\u003eThis unit is factory sealed in its original crate, so the main nameplate is not accessible for photographs. Full load amperage, efficiency, service factor, insulation class and serial number are therefore not confirmed here. Buyers requiring those figures before purchase should request them and they will be obtained from TECO-Westinghouse against the catalog number.\u003c\/p\u003e\n\u003cp\u003eBuyers matching this VSTP3006 for replacement or spare inventory should confirm the catalog number, the frame, and the required shaft configuration against their existing installation before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0526-01707\u003c\/strong\u003e\u003c\/p\u003e","brand":"TECO Westinghouse","offers":[{"title":"Default Title","offer_id":49848870404336,"sku":"m01707","price":53999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m01707.webp?v=1787848349"},{"product_id":"teco-westinghouse-ac-motor-mp1254-100-hp-1800-rpm-01708","title":"TECO Westinghouse MP1254 AC Induction Motor 125 HP 1800 RPM Factory Sealed","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e TECO Westinghouse Motor Company\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e MP1254 (Cat. No. on crate label)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType (per label):\u003c\/strong\u003e AESV3W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e AC Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 125 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoles:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230\/460 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynchronous RPM:\u003c\/strong\u003e 1800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 280M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e TEFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e Not printed on the crate label\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Number:\u003c\/strong\u003e Not shown; motor nameplate not photographed (crate sealed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Factory Sealed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eTECO Westinghouse MP1254 125 HP AC motor in a sealed wooden shipping crate. The crate label reads TECO Westinghouse Motor Company, Cat. No. MP1254, type AESV3W, 4 poles, 125 HP, 60 Hz, 230\/460 V, synchronous speed 1800 RPM, frame 280M, TEFC enclosure.\u003c\/p\u003e\n\u003cp\u003eThese values come from the crate label. The motor's own nameplate has not been photographed because the crate has not been opened, so the serial number and phase are not shown. Protective plastic wrapping is visible inside the crate.\u003c\/p\u003e\n\u003cp\u003eFactory sealed in the original shipping crate, as pictured; the motor has not been removed from the crate or tested by MRO Exchange. Buyers should confirm the model, ratings and frame dimensions against their application before purchase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0626-01708\u003c\/strong\u003e\u003c\/p\u003e","brand":"TECO Westinghouse","offers":[{"title":"Default Title","offer_id":49848945705200,"sku":"m01708","price":8499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m01708.webp?v=1787848561"},{"product_id":"teco-westinghouse-ac-motor-cdp1258r-100-hp-900-rpm-01714","title":"TECO Westinghouse CDP1258R Crusher Duty AC Motor 125 HP 900 RPM Factory Sealed","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e TECO-Westinghouse Motor Company\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e CDP1258R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Crusher Duty AC Induction Motor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e MAX-HT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType Code:\u003c\/strong\u003e AEHHGD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 125 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230\/460V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoles:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSynchronous Speed:\u003c\/strong\u003e 900 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e 447TZ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e TEFC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Factory Sealed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe TECO-Westinghouse CDP1258R is a 125 HP crusher duty AC induction motor rated 230\/460V, 60 Hz, 8-pole, with a synchronous speed of 900 RPM in a 447TZ frame with a TEFC enclosure. The crate label carries the type designation AEHHGD.\u003c\/p\u003e\n\u003cp\u003eThe CD prefix places this motor in the TECO MAX-HT crusher duty line. TECO's published product data describes the CDP1258 as a MAX-HT series low voltage crusher duty NEMA Design C motor at 125 HP, 900 RPM, 230\/460V in a 447T frame with a TEFC enclosure. Crusher duty motors are built for high starting torque and are used on crushers, ball and rolling mills, impactors, chippers, shredders and other high inertia loads, which sets them apart from general purpose motors of the same rating.\u003c\/p\u003e\n\u003cp\u003eThis unit is factory sealed in its original crate, so the motor nameplate is not accessible for photographs. Full load amperage, efficiency, power factor, service factor, insulation class, bearing numbers, weight and serial number are therefore not confirmed here. Buyers requiring those figures before purchase should request them and they will be obtained from TECO-Westinghouse against the catalog number.\u003c\/p\u003e\n\u003cp\u003eBuyers matching this CDP1258R for replacement or spare inventory should confirm the catalog number, the frame and the required torque class against their existing installation before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0526-01714\u003c\/strong\u003e\u003c\/p\u003e","brand":"TECO Westinghouse","offers":[{"title":"Default Title","offer_id":49849545326832,"sku":"m01714","price":17999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m01714.webp?v=1787849040"},{"product_id":"miller-tig-welder-syncrowave-351-350-amp-200230460v-1-phase-01841","title":"Miller Electric Syncrowave 351 TIG Welder 350A 200V AC \/ 230V AC \/ 460V AC 1-Phase","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Miller Electric Mfg. Co.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e Syncrowave 351 903219\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e CC AC\/DC Welding Power Source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Number:\u003c\/strong\u003e KF863240\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 200\/230\/460V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Amperes:\u003c\/strong\u003e 151\/131\/67A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 17.4 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Output:\u003c\/strong\u003e 300A at 32V, 60 percent duty cycle (NEMA Class I); 350A at 34V, 40 percent duty cycle (NEMA Class II)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelding Range AC\/DC:\u003c\/strong\u003e 3 to 400A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum OCV:\u003c\/strong\u003e 80V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis Miller Syncrowave 351 is a CC AC\/DC welding power source identified by nameplate model Syncrowave 351 and stock number 903219, serial number KF863240. It is a single phase unit rated for 200, 230, or 460 volt input, delivering 300A at 32V on a 60 percent duty cycle or 350A at 34V on a 40 percent duty cycle, with a welding range of 3 to 400A and a maximum open circuit voltage of 80V. The unit is paired with a Miller Coolmate 4 water coolant system for torch cooling, along with a cart, torch leads, and coiled hose sets shown in the listing photos. Confirmed identifiers include the nameplate serial number and Miller stock number, both useful for buyers matching an exact replacement or spare unit. Buyers sourcing a Syncrowave 351 for TIG or stick welding applications can use the MPN 903219 to confirm compatibility against their existing equipment or purchasing requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\nStock # 0526-01841","brand":"Miller Electric","offers":[{"title":"Default Title","offer_id":50089895133424,"sku":"m01841","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/BC1A36A6-89C3-4FFE-B09F-1714A2806141.png?v=1785175206"},{"product_id":"miller-tig-welder-syncrowave-351-350-amp-200230460v-1-phase-m01842-01842","title":"Miller Electric Syncrowave 351 TIG Welder 350A 200V AC \/ 230V AC \/ 460V AC 1-Phase","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Miller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN \/ Model:\u003c\/strong\u003e Syncrowave 351\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Constant Current AC\/DC Arc Welding Power Source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200\/230\/460V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage:\u003c\/strong\u003e 151\/131\/67A Input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 17.4 KW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM \/ Alternate Part Number:\u003c\/strong\u003e Stock No. 903219\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Number:\u003c\/strong\u003e KD445595\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis Miller Syncrowave 351 is a constant current AC\/DC arc welding power source built for TIG and Stick welding applications, identified by its nameplate Stock No. 903219 and Serial No. KD445595. The unit is rated for single phase input at 200, 230, or 460 volts, with a listed KW draw of 17.4 that corresponds to its 350 amp, 40 percent duty cycle output rating on this model.\u003c\/p\u003e\n\u003cp\u003eThe unit is mounted on its factory cart with a Miller Coolmate 4 water coolant system attached, along with associated leads and cabling. It is listed as Surplus, Untested condition. Buyers matching an exact Miller catalog or stock number for replacement, spare inventory, or maintenance sourcing can use these confirmed nameplate details to compare against their existing equipment or purchasing requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\nStock # 0526-01842","brand":"Miller Electric","offers":[{"title":"Default Title","offer_id":50089897328880,"sku":"m01842","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/EBC2CE19-4782-4D5B-8A71-33EECD668F17.png?v=1785175174"}],"url":"https:\/\/mroexchange.com\/collections\/active-custom-freight.oembed","provider":"MRO Exchange","version":"1.0","type":"link"}