{"title":"Bearings (Small)","description":"","products":[{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-152","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00152","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-152\u003c\/p\u003e","brand":"AMI Bearings","offers":[{"title":"Default Title","offer_id":48816996319472,"sku":"m00152","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1527.png?v=1783532047"},{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-153","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00153","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-153\u003c\/p\u003e","brand":"AMI Bearings","offers":[{"title":"Default Title","offer_id":48816996352240,"sku":"m00153","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1531.png?v=1783531911"},{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-154","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00154","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-154\u003c\/p\u003e","brand":"AMI Bearings","offers":[{"title":"Default Title","offer_id":48816996385008,"sku":"m00154","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1537.png?v=1783607750"},{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-155","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00155","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-155\u003c\/p\u003e","brand":"AMI Bearings","offers":[{"title":"Default Title","offer_id":48816996417776,"sku":"m00155","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1542.png?v=1783607616"},{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-156","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00156","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-156\u003c\/p\u003e","brand":"AMI Bearings, Inc.","offers":[{"title":"Default Title","offer_id":48816996483312,"sku":"m00156","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1547.png?v=1783607501"},{"product_id":"skf-6409-deep-groove-ball-bearing-45mm-id-x-120mm-od-x-29mm-width-new-0226-159","title":"SKF 6409 Deep Groove Ball Bearing – 45mm ID x 120mm OD x 29mm Width – New","description":"\u003cp\u003eThe SKF 6409 is a single row deep groove ball bearing in the 6400 heavy series, with a 45 mm bore, 120 mm outside diameter, and 29 mm width. The open design has no seals or shields and uses standard radial internal clearance (CN). Construction follows SKF's standard bearing steel specification with a cylindrical bore. This MPN is widely used in electric motors, gearboxes, pumps, fans, conveyors, and general industrial power transmission applications where higher radial load capacity is required than the 6200 or 6300 series can provide in the same bore size. The 6409 supports both radial loads and limited axial loads in either direction. SKF published specifications for this MPN include a limiting speed of 18,000 RPM and a net weight of approximately 1.537 kg. Suffixes that may appear on related SKF MPNs include \/C3 for increased internal clearance, \/C4 for further increased clearance, NR for snap ring groove with snap ring, and 2RS for double sealed configurations. The unit ships in its original SKF marked retail box bearing the model number 6409. Dimensional and technical specifications listed here are sourced from SKF published product data for the 6409 deep groove ball bearing. Buyers should verify clearance class, suffix code, and country of manufacture against application requirements before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-159\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816996614384,"sku":"m00159","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1561.png?v=1783608341"},{"product_id":"koyo-5760-tapered-roller-bearing-76-2mm-id-x-135-76mm-od-x-46-04mm-width-new-0226-160","title":"Koyo 5760 Tapered Roller Bearing, 76.2mm ID x 135.76mm OD x 46.04mm Width, New m00160","description":"\u003cp\u003eThe Koyo 5760 is a single row tapered roller bearing cone with a 3 inch straight bore and 1.815 inch cone width. Manufactured in Japan, this inch series component is the inner ring (cone) assembly portion of a tapered roller bearing set and is designed to pair with a matching cup such as the 5735 to complete the assembly. The 5700 series construction features chrome steel rollers guided by a stamped steel cage, with raceway and rolling element surfaces hardened for use under combined radial and axial loading. Published manufacturer data lists a basic dynamic load rating of 303,000 N and a basic static load rating of 380,000 N, with a maximum shaft fillet radius of 0.14 inch. The tapered geometry directs both radial and unidirectional thrust loads through the roller contact lines toward a common apex on the bearing axis, making this cone suitable for service in axle assemblies, gear reducers, machine tool spindles, agricultural and construction equipment wheel hubs, and similar industrial applications where heavy or impact loads are present. The 5760 part number is recognized across Koyo, Timken, NTN Bower, and other major inch series manufacturers as a dimensionally interchangeable single cone. Packaging shows a date code of 05\/19 and is marked Japan with UPC 605790 040. Supplied in original Koyo Bearings outer box.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-160\u003c\/p\u003e","brand":"Koyo Bearings","offers":[{"title":"Default Title","offer_id":48816996647152,"sku":"m00160","price":103.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1566.png?v=1783608149"},{"product_id":"koyo-jtekt-5760-5735-tapered-roller-bearing-set-76-20mm-id-x-135-73mm-od-x-44-45mm-width-new-0226-162","title":"Koyo 5760 Tapered Roller Bearing, 76.2mm ID x 135.76mm OD x 46.04mm Width - New m00162","description":"\u003cp\u003eThe Koyo 5760 is a single row tapered roller bearing cone with a 3 inch straight bore and 1.815 inch cone width. Manufactured in Japan, this inch series component is the inner ring (cone) assembly portion of a tapered roller bearing set and is designed to pair with a matching cup such as the 5735 to complete the assembly. The 5700 series construction features chrome steel rollers guided by a stamped steel cage, with raceway and rolling element surfaces hardened for use under combined radial and axial loading. Published manufacturer data lists a basic dynamic load rating of 303,000 N and a basic static load rating of 380,000 N, with a maximum shaft fillet radius of 0.14 inch. The tapered geometry directs both radial and unidirectional thrust loads through the roller contact lines toward a common apex on the bearing axis, making this cone suitable for service in axle assemblies, gear reducers, machine tool spindles, agricultural and construction equipment wheel hubs, and similar industrial applications where heavy or impact loads are present. The 5760 part number is recognized across Koyo, Timken, NTN Bower, and other major inch series manufacturers as a dimensionally interchangeable single cone. Packaging shows a date code of 05\/19 and is marked Japan with UPC 605790 040. Supplied in original Koyo Bearings outer box.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-162\u003c\/p\u003e","brand":"KOYO (JTEKT)","offers":[{"title":"Default Title","offer_id":48816996679920,"sku":"m00162","price":103.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1576.png?v=1783607874"},{"product_id":"fag-schaeffler-22207-e1-c3-spherical-roller-bearing-35mm-id-x-72mm-od-x-23mm-width-new-0226-175","title":"FAG 22207-E1-C3 Spherical Roller Bearing – 35mm ID x 72mm OD x 23mm Width – New m00175","description":"\u003cp\u003eThe FAG 22207-E1-C3 is a double row spherical roller bearing manufactured by Schaeffler in Germany. Bore diameter measures 35 mm, outside diameter 72 mm, and width 23 mm. The C3 suffix designates internal radial clearance greater than the standard CN class, suitable for applications involving thermal expansion, interference fits, or elevated operating temperatures. The E1 designation reflects the optimized internal geometry that increases dynamic load capacity over earlier 22200 series designs. Carton labeling identifies the unit as MPN 22207E1.C3*K1, supplied in original FAG packaging printed at Herzogenaurach, Germany.\u003c\/p\u003e\n\u003cp\u003eThe bearing features a cylindrical bore, sheet steel cage, and open (non sealed) construction. Two rows of symmetrical rollers run on a concave spherical raceway in the outer ring, allowing the assembly to accommodate static and dynamic shaft misalignment while supporting heavy radial loads and axial loads in both directions. Typical installation environments include gearboxes, fans, conveyors, vibrating screens, paper machinery, mining equipment, and general industrial drive trains where shaft deflection or housing misalignment is expected.\u003c\/p\u003e\n\u003cp\u003eManufacturer published reference data for the 22207-E1 series lists a basic dynamic load rating of approximately 89 kN, an operating temperature range from negative 30 to 200 degrees C, and a reference speed in the range of 10,700 rpm. Cross reference equivalents include SKF 22207 E\/C3 and NSK 22207 C\/C3. Confirm clearance class, cage material, and shaft fit requirements against the original application specification before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003cimg style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003c\/p\u003e\n\u003cp\u003eStock # 0226-175\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816996745456,"sku":"m00175","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1643.jpg?v=1771352652"},{"product_id":"fag-6011-2rsr-c3-deep-groove-ball-bearing-55mm-id-x-90mm-od-x-18mm-width-new-0226-176","title":"FAG 6011.2RSR.C3 Deep Groove Ball Bearing – 55mm ID x 90mm OD x 18mm Width – New","description":"\u003cp\u003eThe FAG 6011.2RSR.C3 is a single row deep groove ball bearing manufactured by FAG, a Schaeffler Group brand. Bore diameter is 55 mm, outer diameter is 90 mm, and width is 18 mm, per published Schaeffler specifications. The 2RSR designation indicates contact lip seals made from nitrile butadiene rubber on both sides, providing protection against contamination and lubricant loss in moderate speed applications. The C3 suffix denotes a radial internal clearance greater than the standard Normal class, suitable for applications involving elevated operating temperatures, interference fits, or higher rotational speeds where additional internal clearance is required to compensate for thermal expansion. Lubrication is grease for life. The bearing is supplied in its original FAG packaging marked with part number 6011.2RSR.C3, lot identifier 20070711, and EAN barcode 4012801068789. Typical applications include electric motors, gearboxes, pumps, fans, conveyors, and general industrial rotating equipment where a sealed, double sided protected radial ball bearing with increased internal clearance is specified. The 60 series places this item in the Extra Light dimension series under DIN 625 1, with a steel cage and cylindrical bore. Country of origin and date code information is as marked on the original box. No testing, condition, or performance claims are made beyond the published manufacturer specifications for this part number.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-176\u003c\/p\u003e","brand":"FAG","offers":[{"title":"Default Title","offer_id":48816996778224,"sku":"m00176","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1646.jpg?v=1771353033"},{"product_id":"consolidated-bearings-nn-3013-kms-p-5-double-row-cylindrical-roller-bearing-65mm-id-x-100mm-od-x-26mm-width-new-0226-166","title":"Consolidated Bearings NN-3013-KMS P\/5 Double Row Cylindrical Roller Bearing – 65mm ID x 100mm OD x 26mm Width – New","description":"\u003cp\u003eThe Consolidated Bearings NN-3013-KMS P\/5 is a double row cylindrical roller bearing with a tapered bore, designed for high precision rotating applications including machine tool spindles, gearboxes, and rolling mill assemblies. The bearing measures 65 mm bore, 100 mm outside diameter, and 26 mm width. The K suffix designates a 1:12 tapered bore, the M suffix indicates a machined bronze cage, and the P\/5 designation corresponds to ABEC #5 precision with ABEC #7 running accuracy. Two ribs on the outer ring and three ribs on the inner ring guide the cylindrical rollers in a double row arrangement, providing high radial load capacity along with the ability to accommodate axial displacement between the inner and outer rings. The outer and inner rings are separable, simplifying installation and removal during spindle service. Published manufacturer specifications for the NN3013 size class indicate a dynamic radial load rating of approximately 76.5 kN and a static radial load rating of approximately 116 kN, with a reference speed rating in the 8,000 to 9,500 r\/min range depending on lubrication. Consolidated Bearings has distributed precision cylindrical roller bearings to OEM and MRO accounts in the United States since 1932. The unit is packaged in its original Consolidated branded carton and includes a barcode label marked NN-3013-K and a product label reading NN-3013-KMS P\/5 with UPC 644075076159. Common applications include CNC lathe and milling machine main spindles, grinding spindles, and precision indexing tables.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-166\u003c\/p\u003e","brand":"Consolidated Bearings","offers":[{"title":"Default Title","offer_id":48816996876528,"sku":"m00166","price":966.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1596.png?v=1783608736"},{"product_id":"fag-schaeffler-3212-bd-tvh-c3-double-row-angular-contact-ball-bearing-60mm-id-x-110mm-od-x-36-5mm-width-new-0226-168","title":"FAG 3212-BD-TVH-C3 Double Row Angular Contact Ball Bearing – 60mm ID x 110mm OD x 36.5mm Width – New","description":"\u003cp\u003eThe FAG 3212-BD-TVH-C3 is a double row angular contact ball bearing manufactured by Schaeffler in Slovakia. Carton markings identify the part as 3212-BD-TVH with C3 internal clearance and a quantity of one piece. The bearing carries production tracking codes 063712733-0030-02 and 4012802408805, along with internal references 0045K0128\/0011714248\/5577035 printed on the carton label.\u003c\/p\u003e\n\u003cp\u003ePer published Schaeffler specifications for the 32-BD series, this bearing has a 60 mm bore, 110 mm outer diameter, and 36.5 mm width. It uses two rows of balls in an O arrangement with a 30 degree contact angle, supporting combined radial and axial loads in both directions. The TVH suffix designates a moulded polyamide snap type cage that is rolling element riding. The C3 designation indicates internal radial clearance greater than standard CN, suited to applications running at elevated speeds or with thermal expansion at the inner ring.\u003c\/p\u003e\n\u003cp\u003eCommon applications for 32 series double row angular contact ball bearings include machine tool spindles, gearboxes, pumps, fans, agitators, and general industrial drive assemblies where simultaneous radial and bidirectional axial load capacity is required in a compact width. The bearing is supplied in the original FAG carton as shown.\u003c\/p\u003e\n\u003cp\u003eDimensional values listed above are sourced from manufacturer published specifications rather than direct measurement. Buyers should verify clearance class, cage type, and dimensions against their application before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-168\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816996942064,"sku":"m00168","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1609.png?v=1783609951"},{"product_id":"fag-schaeffler-6310-2rsr-c3-deep-groove-ball-bearing-50mm-id-x-110mm-od-x-27mm-width-new-0226-169","title":"FAG 6310.2RSR.C3 Deep Groove Ball Bearing – 50mm ID x 110mm OD x 27mm Width – New m00169","description":"\u003cp\u003eThe FAG 6310.2RSR.C3 is a single row deep groove ball bearing manufactured by Schaeffler Group with a 50 mm bore, 110 mm outside diameter, and 27 mm width. The 2RSR designation indicates contact rubber seals on both sides for lifetime lubrication and contamination protection in environments where dust, debris, or moisture exposure is a concern. The C3 suffix indicates greater than normal internal radial clearance, suited for applications involving thermal expansion, interference fits, or operating conditions where standard CN clearance is not appropriate. This bearing is part of the FAG 6300 medium series and is widely specified across electric motors, fans, blowers, pumps, gearboxes, conveyor systems, and general industrial machinery. The package is labeled with FAG production code 22100911 and carries the standard FAG branded retail packaging shown in the listing photos. Bore 50 mm, outside diameter 110 mm, width 27 mm. Sealed type 2RSR with rubber seals on both sides. Internal clearance class C3. Single row, open cage configuration internal to the seals. Functionally interchangeable with industry designations 6310 2RS C3, 6310 2RSR C3, and 63102RSRC3 across SKF, NSK, NTN, Koyo, and Timken equivalents within tolerance class specifications. Quantity reflected in the listing title is the unit count being offered. Buyers should verify the part number, internal clearance class, and seal type against application requirements before purchase.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-169\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816996974832,"sku":"m00169","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1614.png?v=1783609738"},{"product_id":"fag-schaeffler-group-22212-e1a-xl-m-spherical-roller-bearing-60mm-id-x-110mm-od-x-28mm-width-new-0226-170","title":"FAG 22212-E1A-XL-M Spherical Roller Bearing – 60mm ID x 110mm OD x 28mm Width – New m00170","description":"\u003cp\u003eThe FAG 22212-E1A-XL-M is a double row spherical roller bearing in the 222 series, manufactured by Schaeffler Group in Germany. This unit features a 60 mm bore, 110 mm outside diameter, and 28 mm width, with a cylindrical (straight) bore configuration. The bearing uses a solid machined brass cage guided on the inner ring, designated by the \"M\" suffix, and carries the X life designation indicating Schaeffler's premium internal construction with optimized contact surfaces, higher grade steel, and refined rolling elements for increased load capacity and extended service life. The E1A internal design provides higher dynamic load ratings than standard 222 series geometry. Production identifiers visible on the packaging include 0200R0J16, batch reference 0028606848, and trace code 019015933 0000 02. The X life branding and original FAG factory carton confirm OEM packaging. Spherical roller bearings of this geometry accommodate misalignment between shaft and housing while supporting heavy radial loads and axial loads in both directions, making them common in gearboxes, fans, blowers, conveyors, vibrating screens, paper machinery, crushers, mining equipment, marine drives, and general heavy duty industrial machinery. The 22212 size class is widely used as a replacement bearing across power transmission, material handling, and process equipment applications. Cross references for this designation include 22212-E1-XL-M and legacy 22212-E1-M numbering. Item shown in factory sealed FAG box marked Made in Germany.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-170\u003c\/p\u003e","brand":"FAG (Schaeffler Group)","offers":[{"title":"Default Title","offer_id":48816997105904,"sku":"m00170","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1619_21ed639e-a384-4d3a-ae37-5f566f24bfc0.png?v=1783609609"},{"product_id":"fag-schaeffler-group-22212-e1a-xl-m-spherical-roller-bearing-60mm-id-x-110mm-od-x-28mm-width-new-0226-171","title":"FAG 22212-E1A-XL-M Spherical Roller Bearing – 60mm ID x 110mm OD x 28mm Width – New m00171","description":"\u003cp\u003eThe FAG 22212-E1A-XL-M is a spherical roller bearing manufactured in Germany by Schaeffler under the FAG brand and designated as part of the X-life product family. The bearing carries an inner diameter of 60 mm, an outer diameter of 110 mm, and a width of 28 mm. The 22212 designation places it within the 222 series of double row spherical roller bearings, while the E1A suffix indicates the optimized internal geometry developed by FAG for increased dynamic load capacity. The XL marking identifies the bearing as an X-life version, which incorporates higher grade rolling elements, raceway surfaces, and steel cleanliness compared to standard catalog production. The M suffix specifies a machined solid brass cage guided on the inner ring, a configuration commonly selected for applications involving higher operating temperatures, heavier loads, or environments where polymer cages are unsuitable. The bearing is supplied in its original FAG factory packaging with a cylindrical bore (no K suffix), open construction, and is marked with manufacturer date code 0200R0416 and batch identifiers 0028606848 and 019015933. Spherical roller bearings of this type are used in industrial gearboxes, fans, blowers, conveyors, vibrating equipment, pumps, paper machinery, and other heavy duty rotating assemblies that require accommodation of misalignment between the shaft and housing. The 22212 series is interchangeable across major bearing manufacturers under equivalent ISO dimensional standards. EAN 4026677807755.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-171\u003c\/p\u003e","brand":"FAG (Schaeffler Group)","offers":[{"title":"Default Title","offer_id":48816997138672,"sku":"m00171","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1623.png?v=1783609423"},{"product_id":"fag-schaeffler-group-22212-e1a-xl-m-spherical-roller-bearing-60mm-id-x-110mm-od-x-28mm-width-new-0226-172","title":"FAG 22212-E1A-XL-M Spherical Roller Bearing – 60mm ID x 110mm OD x 28mm Width – New","description":"\u003cp\u003eThe FAG 22212-E1A-XL-M is a double row spherical roller bearing manufactured by Schaeffler Group in Germany, identified by EAN 4026677807755. This X-life series unit measures 60 mm bore, 110 mm outside diameter, and 28 mm width, with a cylindrical (straight) bore designation. The E1A internal geometry represents an optimized design with increased roller and raceway contact area, while the M suffix indicates a one piece machined brass cage guided on the inner ring. The XL marking denotes Schaeffler's X-life premium designation, reflecting upgraded steel grade, surface finish, and dimensional tolerances over standard catalog spherical roller bearings.\u003c\/p\u003e\n\u003cp\u003eSpherical roller bearings of this configuration accommodate heavy radial loads and axial loads in both directions, and the inherent self aligning capability compensates for shaft deflection and mounting misalignment between the bore and housing. Two rows of symmetrical barrel rollers operate against a common concave outer raceway, allowing the inner ring to articulate within the outer ring under load.\u003c\/p\u003e\n\u003cp\u003eTypical applications include gearbox shafts, fan and blower assemblies, conveyor pulleys, crusher shafts, paper machinery, vibrating screens, and general heavy duty industrial drive trains. The X-life specification supports higher dynamic load ratings and extended service intervals compared to standard 22212 series units.\u003c\/p\u003e\n\u003cp\u003ePackage markings include traceability codes 0200R0416 \/ 0028606848 \/ 019015933 0000 02. The unit is supplied in original FAG factory packaging. MPN: 22212-E1A-XL-M. Country of origin: Germany.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-172\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816997204208,"sku":"m00172","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1629.png?v=1783609274"},{"product_id":"fag-schaeffler-6310-2rsr-c3-deep-groove-ball-bearing-50mm-id-x-110mm-od-x-27mm-width-new-0226-173","title":"FAG 6310.2RSR.C3 Deep Groove Ball Bearing – 50mm ID x 110mm OD x 27mm Width – New","description":"\u003cp\u003eThe FAG 6310.2RSR.C3 is a single row deep groove ball bearing with rubber contact seals on both sides and C3 internal clearance. Dimensions per manufacturer published specifications are 50 mm bore, 110 mm outside diameter, and 27 mm width. The 2RSR seal designation indicates rubber sealing on each side of the bearing, providing protection against contaminants and helping retain factory grease lubrication. The C3 suffix denotes a radial internal clearance greater than the Normal class, suitable for applications involving elevated operating temperatures, interference fits on the shaft or housing, or higher rotational speeds where additional internal clearance accommodates thermal expansion.\u003c\/p\u003e\n\u003cp\u003eMarked 6310.2RSR.C3 with manufacturing code 01090111 and country of origin South Korea. Branded with the FAG logo, part of the Schaeffler Group. Barcode 4012801165518 is present on the package label.\u003c\/p\u003e\n\u003cp\u003eThis medium series 6300 family bearing is widely used in electric motors, gearboxes, pumps, fans, conveyors, agricultural machinery, and general industrial power transmission applications. The deep groove geometry supports radial loads and limited axial loads in both directions, making it a versatile choice for shaft support in rotating equipment. The sealed design reduces the need for relubrication during service life. Cross reference designations commonly associated with this part include 6310 2RS C3, 6310 2RSR C3, and 63102RSRC3. Buyer is responsible for verifying specifications and suitability for the intended application before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-173\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816997433584,"sku":"m00173","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1634.jpg?v=1771352839"},{"product_id":"barden-nn3020km-precision-cylindrical-roller-bearing-100mm-id-x-150mm-od-x-37mm-width-new-0226-179","title":"Barden NN3020KM SP51W33 Precision Cylindrical Roller Bearing – 100mm ID x 150mm OD x 37mm Width – New","description":"\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eThe Beaver Precision NN3020KM SP51W33 is a double row cylindrical roller bearing designed for machine tool main spindle applications where high radial load capacity, rigidity, and running accuracy are required. Bore diameter measures 100 mm, outside diameter measures 150 mm, and width measures 37 mm, conforming to standard NN30 series dimensions for this size. The K suffix designates a 1:12 tapered bore that allows the user to set radial internal clearance precisely by drawing the inner ring up the tapered shaft. The M designation indicates a machined brass cage that is roller guided, suitable for higher rotational speeds and higher operating temperatures than polymer cages. SP class corresponds to ISO P5 dimensional accuracy and ISO P4 running accuracy. The W33 suffix indicates an annular lubrication groove and three lubrication holes in the outer ring, allowing relubrication during service without disassembly. The double row configuration places two rows of cylindrical rollers between a triple ribbed inner ring and a separable plain outer ring, providing high radial stiffness in a compact axial envelope. The outer ring is separable from the inner ring assembly, which simplifies mounting and dismounting in spindle housings. Typical applications include lathe spindles, milling machine spindles, grinding machine work heads, machining center spindles, and other precision rotating assemblies. The part number NN3020KM SP51W33 appears on the original Beaver Precision box label. Cross references include SKF NN3020 KTN9\/SP, FAG NN3020 AS K M SP, NSK NN3020MBKRE44CC1P4, and NTN NN3020K.Stock # 0226-179\u003c\/span\u003e\u003c\/p\u003e","brand":"Barden","offers":[{"title":"Default Title","offer_id":48816997499120,"sku":"m00179","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1661.jpg?v=1771351710"},{"product_id":"fag-schaeffler-22207-e1-c3-spherical-roller-bearing-35mm-id-x-72mm-od-x-23mm-width-new-0226-174","title":"FAG 22207-E1-C3 Spherical Roller Bearing – 35mm ID x 72mm OD x 23mm Width – New m00174","description":"\u003cp\u003eThe FAG 22207-E1-C3 is a double row spherical roller bearing manufactured by Schaeffler in Germany. Bore diameter measures 35 mm, outside diameter 72 mm, and width 23 mm. The C3 suffix designates internal radial clearance greater than the standard CN class, suitable for applications involving thermal expansion, interference fits, or elevated operating temperatures. The E1 designation reflects the optimized internal geometry that increases dynamic load capacity over earlier 22200 series designs. Carton labeling identifies the unit as MPN 22207E1.C3*K1, supplied in original FAG packaging printed at Herzogenaurach, Germany.\u003c\/p\u003e\n\u003cp\u003eThe bearing features a cylindrical bore, sheet steel cage, and open (non sealed) construction. Two rows of symmetrical rollers run on a concave spherical raceway in the outer ring, allowing the assembly to accommodate static and dynamic shaft misalignment while supporting heavy radial loads and axial loads in both directions. Typical installation environments include gearboxes, fans, conveyors, vibrating screens, paper machinery, mining equipment, and general industrial drive trains where shaft deflection or housing misalignment is expected.\u003c\/p\u003e\n\u003cp\u003eManufacturer published reference data for the 22207-E1 series lists a basic dynamic load rating of approximately 89 kN, an operating temperature range from negative 30 to 200 degrees C, and a reference speed in the range of 10,700 rpm. Cross reference equivalents include SKF 22207 E\/C3 and NSK 22207 C\/C3. Confirm clearance class, cage material, and shaft fit requirements against the original application specification before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-174\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816997531888,"sku":"m00174","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1639.jpg?v=1771352640"},{"product_id":"mrc-5210mg-double-row-angular-contact-ball-bearing-50mm-id-x-90mm-od-x-30mm-width-new-0226-180","title":"MRC 5210MG Double Row Angular Contact Ball Bearing – 50mm ID x 90mm OD x ~30mm Width – New","description":"\u003cp\u003eThe MRC 5210MG is a double row angular contact ball bearing from the 5200M Light series, designed for applications requiring combined radial and bi-directional thrust load capacity. This unit features a 50 mm bore, 90 mm outside diameter, and 30.16 mm width, with a 30 degree contact angle and an internal snap ring groove for axial location in the housing. Construction is chrome steel with a pressed steel cage, open enclosure, and C3 internal clearance. The bearing carries an ABEC 1 precision rating as marked on the original packaging. Per manufacturer published specifications, dynamic load rating is 53,900 N and static load rating is 58,500 N, with a maximum operating speed of 6,300 RPM and a temperature limit of 450 degrees F. The MRC 5200M series uses two rows of balls arranged in a back to back configuration, providing performance similar to two single row angular contact bearings mounted together. Thrust loads should be carried on the non filling notch row, with moderate thrust permissible on the filling notch row. Common applications include machine tool spindles, drill presses, gearboxes, pumps, and other industrial power transmission assemblies where combined loads and rigid shaft support are required. The item is supplied in its original MRC factory branded box marked 5210MG STEEL\/C3\/ABEC 1 with the 317E suffix code. The bore inside diameter measures 1.969 in. and the outside diameter measures 3.543 in. per published dimensional data. MRC bearings are produced under the SKF group and are a recognized OEM source for replacement ball bearings used across general industrial, machine tool, and MRO applications.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-180\u003c\/p\u003e","brand":"MRC","offers":[{"title":"Default Title","offer_id":48816997564656,"sku":"m00180","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1666.jpg?v=1771354827"},{"product_id":"skf-6019-2z-c3-deep-groove-ball-bearing-95mm-id-x-145mm-od-x-24mm-width-new-0226-184","title":"SKF 6019-2Z\/C3 Deep Groove Ball Bearing – 95mm ID x 145mm OD x 24mm Width – New","description":"\u003cp\u003eThe SKF 6019-2Z\/C3 is a single row deep groove ball bearing with metal shields on both sides and C3 internal clearance. The bearing measures 95 mm bore, 145 mm outside diameter, and 24 mm width. Manufactured in France and supplied in original SKF Explorer packaging, this part number designates a shielded configuration (2Z) with radial internal clearance greater than normal (C3), making it suited for applications involving thermal expansion, higher operating temperatures, or elevated rotational speeds. The deep groove geometry supports both radial and axial loads in either direction, and the steel cage maintains consistent ball spacing for load distribution and reduced friction.\u003c\/p\u003e\n\u003cp\u003eCommon applications include electric motors, gearboxes, pumps, compressors, fans, blowers, conveyors, and general industrial machinery where shielded protection against contamination is required and lubricant retention is needed. The metal shields are non contact, allowing higher speed capability than rubber sealed variants while still protecting against debris ingress.\u003c\/p\u003e\n\u003cp\u003eSpecifications include a bore diameter of 95 mm, outside diameter of 145 mm, width of 24 mm, two metal shields, C3 clearance class, and standard SKF Explorer performance grade. The MPN 6019-2Z\/C3 is the SKF reference designation and is cross referenced by FAG, NSK, Timken, and NTN equivalents in the same series and clearance class. Country of origin marking on the box reads 21-MADE IN FRANCE.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-184\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816997990640,"sku":"m00184","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1686.jpg?v=1771357011"},{"product_id":"timken-432d-tapered-roller-bearing-cup-95-25mm-od-x-50-80mm-width-new-0226-186","title":"Timken 432D Tapered Roller Bearing Cup – 95.25mm OD x 50.80mm Width – New m00186","description":"\u003cp\u003eRated for a 3.4843 in. outer diameter and 1-5\/16 in. width, the Timken 4320 is a Series 435 single cup outer race used in the assembly of single row tapered roller bearings. The cup pairs with a separately sold cone (inner race) assembly to form a complete bearing capable of carrying both radial and thrust loads. Manufacturer published specifications include a 0.130 in. maximum housing fillet radius and standard tolerance class. Construction is Timken high alloy bearing steel with an open configuration that allows for in-place lubrication and endplay or preload adjustment during equipment assembly. The 4320 part number is the market recognized OEM identifier for this Series 435 cup and is referenced consistently across industrial distributor catalogs including Applied, Eastern Industrial Automation, and Monarch Bearing. The cup is supplied in original Timken Tapered Roller Bearings packaging marked 4320 with lot code 200107 22. Single row tapered roller bearings of this size are commonly applied in vehicle axles, transmissions, wheel hubs, industrial gearboxes, conveyor drives, and other mechanical power transmission applications calling for combined load capacity. Operating temperature range per published Timken data is 65 to 250 degrees F. The 4320 2 variant referenced by some distributors corresponds to the same Series 435 cup with a different packaging or precision designation. This item is the cup only and does not include a matching cone.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-186\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48816998121712,"sku":"m00186","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1696.jpg?v=1771356833"},{"product_id":"timken-432d-tapered-roller-bearing-cup-95-25mm-od-x-50-80mm-width-new-0226-187","title":"Timken 432D Tapered Roller Bearing Cup – 95.25mm OD x 50.80mm Width – New","description":"\u003cp\u003eRated for a 3.4843 in. outer diameter and 1-5\/16 in. width, the Timken 4320 is a Series 435 single cup outer race used in the assembly of single row tapered roller bearings. The cup pairs with a separately sold cone (inner race) assembly to form a complete bearing capable of carrying both radial and thrust loads. Manufacturer published specifications include a 0.130 in. maximum housing fillet radius and standard tolerance class. Construction is Timken high alloy bearing steel with an open configuration that allows for in-place lubrication and endplay or preload adjustment during equipment assembly. The 4320 part number is the market recognized OEM identifier for this Series 435 cup and is referenced consistently across industrial distributor catalogs including Applied, Eastern Industrial Automation, and Monarch Bearing. The cup is supplied in original Timken Tapered Roller Bearings packaging marked 4320 with lot code 200107 22. Single row tapered roller bearings of this size are commonly applied in vehicle axles, transmissions, wheel hubs, industrial gearboxes, conveyor drives, and other mechanical power transmission applications calling for combined load capacity. Operating temperature range per published Timken data is 65 to 250 degrees F. The 4320 2 variant referenced by some distributors corresponds to the same Series 435 cup with a different packaging or precision designation. This item is the cup only and does not include a matching cone.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-187\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48816998187248,"sku":"m00187","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1702.jpg?v=1771356170"},{"product_id":"skf-7210-becby-angular-contact-ball-bearing-50mm-id-x-90mm-od-x-20mm-width-new-0226-189","title":"SKF 7210 BECBY Angular Contact Ball Bearing – 50mm ID x 90mm OD x 20mm Width – New m00189","description":"\u003cp\u003eThe SKF 7210 BECBY is a single row angular contact ball bearing with a 50 mm bore, 90 mm outside diameter, and 20 mm width. The designation indicates a 40 degree contact angle (B), a lower shoulder on the inner ring with high capacity ball complement (E), a stamped steel cage centered on the balls (CB), and universal matching (Y), allowing two bearings to be paired in any arrangement without shims. The bearing is configured to accommodate combined radial and axial loads, with axial load capacity in one direction only. Typical applications include machine tool spindles, pumps, gearboxes, electric motors, and compressors where moderate to high speed operation under combined loading is required. The bearing is sourced from SKF and marked Made in USA, with date code 072U and stock code 12 visible on the original SKF box label. Specifications confirmed via SKF published catalog data include a contact angle of 40 degrees, ABEC 3 precision class as shown on the box, and an open enclosure with no integral seals or shields. The unit ships in its original SKF retail box. Cross reference numbers used in industry include 7210 BEP, 7210 BECBP, 7210 BECBM, and 7210 BECBJ for variants with different cage and matching specifications, though these are not direct substitutes for the BECBY configuration.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-189\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816998252784,"sku":"m00189","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1712.jpg?v=1771356113"},{"product_id":"skf-7210-becby-angular-contact-ball-bearing-50mm-id-x-90mm-od-x-20mm-width-new-0226-190","title":"SKF 7210 BECBY Angular Contact Ball Bearing – 50mm ID x 90mm OD x 20mm Width – New","description":"\u003cp\u003eThe SKF 7210 BECBY is a single row angular contact ball bearing with a 50 mm bore, 90 mm outside diameter, and 20 mm width. The designation indicates a 40 degree contact angle (B), a lower shoulder on the inner ring with high capacity ball complement (E), a stamped steel cage centered on the balls (CB), and universal matching (Y), allowing two bearings to be paired in any arrangement without shims. The bearing is configured to accommodate combined radial and axial loads, with axial load capacity in one direction only. Typical applications include machine tool spindles, pumps, gearboxes, electric motors, and compressors where moderate to high speed operation under combined loading is required. The bearing is sourced from SKF and marked Made in USA, with date code 072U and stock code 12 visible on the original SKF box label. Specifications confirmed via SKF published catalog data include a contact angle of 40 degrees, ABEC 3 precision class as shown on the box, and an open enclosure with no integral seals or shields. The unit ships in its original SKF retail box. Cross reference numbers used in industry include 7210 BEP, 7210 BECBP, 7210 BECBM, and 7210 BECBJ for variants with different cage and matching specifications, though these are not direct substitutes for the BECBY configuration.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-190\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816998285552,"sku":"m00190","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1717.jpg?v=1771356098"},{"product_id":"skf-7210-becby-bearing-50mm-id-x-90mm-od-x-20mm-width-new-0226-191","title":"SKF 7210 BECBY Bearing – 50mm ID x 90mm OD x 20mm Width – New","description":"\u003cp\u003eThe SKF 7210 BECBY is a single row angular contact ball bearing with a 50 mm bore, 90 mm outside diameter, and 20 mm width. The designation indicates a 40 degree contact angle (B), a lower shoulder on the inner ring with high capacity ball complement (E), a stamped steel cage centered on the balls (CB), and universal matching (Y), allowing two bearings to be paired in any arrangement without shims. The bearing is configured to accommodate combined radial and axial loads, with axial load capacity in one direction only. Typical applications include machine tool spindles, pumps, gearboxes, electric motors, and compressors where moderate to high speed operation under combined loading is required. The bearing is sourced from SKF and marked Made in USA, with date code 072U and stock code 12 visible on the original SKF box label. Specifications confirmed via SKF published catalog data include a contact angle of 40 degrees, ABEC 3 precision class as shown on the box, and an open enclosure with no integral seals or shields. The unit ships in its original SKF retail box. Cross reference numbers used in industry include 7210 BEP, 7210 BECBP, 7210 BECBM, and 7210 BECBJ for variants with different cage and matching specifications, though these are not direct substitutes for the BECBY configuration.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-191\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48819144130800,"sku":"m00191","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1722.jpg?v=1770841690"},{"product_id":"ntn-30211-4t-30211-bearing-55mm-id-x-100mm-od-x-22-75mm-width-new-0226-192","title":"NTN 4T-30211 Bearing – 55mm ID x 100mm OD x 22.75mm Width – New","description":"\u003cp\u003eThe NTN 4T-30211 is a single row tapered roller bearing with a 55 mm bore, 100 mm outside diameter, and 22.75 mm overall width. The 4T prefix designates NTN's case carburized steel construction, engineered to deliver improved fatigue life and shock load resistance compared to standard through hardened tapered roller bearings. Internal dimensions include a cone width (B) of 21 mm and a cup width (C) of 18 mm. The bearing is supplied as a complete assembly consisting of an inner ring (cone) with roller and cage assembly, plus a separable outer ring (cup), allowing independent mounting of each component during shaft and housing assembly. Rated dynamic load capacity is 93 kN with a static load capacity of 111 kN. Limiting speed is 3,600 RPM under grease lubrication and 4,900 RPM under oil lubrication. The cage is sheet steel and tolerance class is P0\/PN2 (ABEC 1). Operating temperature range is 40 to 120 degrees C. The tapered geometry supports combined radial and axial loads in one direction and is commonly used in mirror image pairs for two direction axial load capability. Typical applications include gearboxes, wheel hubs, industrial drive shafts, pumps, conveyors, and general rotating equipment requiring high radial and thrust capacity. Box is marked with NTN part number 4T-30211[J100], catalog reference 30211, UPC 4547359003239, and date code 12\/16\/14. Supplied in original NTN factory packaging.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-192\u003c\/p\u003e","brand":"NTN","offers":[{"title":"Default Title","offer_id":48819144163568,"sku":"m00192","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1727.jpg?v=1770841633"},{"product_id":"timken-ll225749-bearing-127mm-id-x-165-9mm-od-x-18-26mm-width-new-0226-196","title":"Timken LL225749 Bearing – 127mm ID x 165.9mm OD x 18.26mm Width – New","description":"\u003cp\u003eThe Timken LL225749 is a single row tapered roller bearing cone (inner ring) from the LL225700 series, designed for high load, moderate speed industrial applications. This cone assembly mates with the LL225710 cup (sold separately) to form a complete single row tapered roller bearing assembly capable of supporting combined radial and axial loads on rotating shafts.\u003c\/p\u003e\n\u003cp\u003eConstruction features a high alloy steel cone with a stamped steel cage that positions the tapered rollers for true rolling motion and reduced friction. The bore measures 5.0000 in., with a cone width of 0.6875 in. (11\/16 in.). Dynamic load rating is 20,300 lb and static load rating is 34,400 lb per Timken published specifications. The bearing is rated for operating temperatures from 65 deg F to 250 deg F and built to ABMA standard 19.2 Class 2 (standard) tolerance.\u003c\/p\u003e\n\u003cp\u003eCommon applications include Porsche 934 midboard floater hubs, Hitachi EX60 and EX90 series excavator components, heavy duty off road axle systems, agricultural drivetrains, mining equipment, conveyor systems, and other industrial machinery where radial and thrust loads must be managed in a compact envelope. The LL225749 part number is the OEM market recognized identifier for this cone, manufactured by The Timken Company, Canton, Ohio. UPC 0053893111773. Item ships in original Timken branded box as pictured.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-196\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144261872,"sku":"m00196","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00196-1.jpg?v=1775505826"},{"product_id":"timken-5521-bearing-123-03mm-id-x-32-54mm-width-new-0226-198","title":"Timken 552D Type for Title Tapered Roller Bearing Double Cup – 4.875 In. OD x 2.5 In. Cup Width – New","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe Timken 552D is a double tapered roller bearing cup designed as the outer race component for TDO (Tapered Double Outer) assemblies. It features an outer diameter of 4.875 inches and a cup width of 2.5 inches, with the dimensional data sourced from Timken published specifications. The 552D pairs with multiple Timken cone part numbers, including 552 (or 552A), 554, 555, 555S, 558, 558A, 558S, 559, and 560, allowing the assembly to be configured for a wide range of shaft diameters within a common housing bore. The double cup is constructed from Timken high alloy bearing steel and is machined to inch series tolerances. As part of a TDO assembly, the 552D is mounted with two single cones in a back to back arrangement, providing combined radial and thrust load capacity along with resistance to overturning moments. The TDO configuration permits the bearing to be installed in fixed positions or to float in the housing bore. Common applications include industrial gearboxes, axle systems, pinion supports, and other power transmission equipment requiring high radial and axial load capability. The cup carries the registered Timken trademark and is supplied in its original Timken tapered roller bearings box marked 552D. Country of origin and packaging condition are as shown in the listing photos. Sold as a standalone replacement cup component without matching cones.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-198\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144327408,"sku":"m00198","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00198-1.jpg?v=1775505827"},{"product_id":"timken-lm67048-bearing-31-75mm-id-x-59-13mm-od-x-15-88mm-width-new-0226-201","title":"Timken LM67048 Bearing – 1.2500 In. Bore x 0.6600 In. Cone Width – New","description":"\u003cp\u003eThe Timken LM67048 is a single tapered roller bearing cone designed to handle combined radial and axial loads in tapered roller bearing assemblies. As the inner ring component, this cone is engineered to mate with the LM67010 cup (commonly referenced together as Timken SET6) to form a complete tapered roller bearing. The cone includes the integrated cage and roller assembly that contacts the cup raceway at a defined angle, enabling the bearing to support thrust loads in one direction while simultaneously carrying radial loads.\u003c\/p\u003e\n\u003cp\u003eConfirmed dimensions sourced from Timken published specifications: 1.2500 in. bore (inner diameter), 0.6600 in. cone width. The LM67048 cone is part of the LM67000 series of imperial tapered roller bearings. Typical applications include automotive wheel hubs, light truck and trailer axles, agricultural equipment, industrial gearboxes, transmission countershafts, and machinery shafts where adjustable preload between opposing tapered bearings is required.\u003c\/p\u003e\n\u003cp\u003eManufactured by The Timken Company, the LM67048 carries the OEM part marking shown on the original packaging. The cone, rollers, and cage are supplied as a single non separable assembly per the standard tapered roller bearing convention. The matching cup (outer race) is sold separately under part number LM67010 when a complete bearing set is required.\u003c\/p\u003e\n\u003cp\u003eItem ships in the original Timken retail box as pictured. Branding visible on the packaging includes the Timken logo and the Tapered Roller Bearings product line designation. Part number LM67048 is printed on the box label along with the manufacturer barcode.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-201\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144491248,"sku":"m00201","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00201-1.jpg?v=1775505829"},{"product_id":"timken-25590-bearing-1-7500in-id-x-0-8125in-width-new-0226-230","title":"Timken 25590 Bearing – 1.7500in ID x 0.8125in Width – New m00230","description":"\u003cp\u003eThe Timken 25590 is a single cone (inner ring) assembly for an imperial tapered roller bearing, supplied in the original Timken branded box as pictured. Part of the 25500 series, this cone pairs with compatible cups including the 25520, 25521, 25521B, 25522, 25523, 25527, and 25528 to form a complete TS (Tapered Single) tapered roller bearing capable of supporting combined radial and axial loads.\u003c\/p\u003e\n\u003cp\u003ePer Timken published specifications, the 25590 has a cone bore (d) of 1.7960 in. and a cone width (B) of 1.0000 in. Construction is chrome steel with a stamped steel cage that separates the rollers to reduce friction and noise during operation. Operating temperature range is rated from 65 to 250 degrees F. ABMA precision rating is Class 2. UPC 053893216171.\u003c\/p\u003e\n\u003cp\u003eTapered roller bearings of this series are commonly used in wheel hubs, axle assemblies, gearboxes, differentials, pinion shafts, agricultural equipment, conveyor drives, and general industrial power transmission applications where opposing pairs are mounted to evenly distribute load across a shaft.\u003c\/p\u003e\n\u003cp\u003eBrand: Timken. Part Number: 25590. Type: Tapered Roller Bearing Cone. Series: 25500. Bore: 1.7960 in. Width: 1.0000 in. Cage: Stamped Steel. Material: Chrome Steel. Compatible Cups: 25520, 25521, 25521B, 25522, 25523, 25527, 25528. Cone only, cup sold separately.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-230\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144655088,"sku":"m00230","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00230-1.jpg?v=1775507180"},{"product_id":"timken-25590-bearing-1-7500in-id-x-0-8125in-width-new-0226-231","title":"Timken 25590 Bearing – 1.7500in ID x 0.8125in Width – New m00231","description":"\u003cp\u003eThe Timken 25590 is a single cone (inner ring) assembly for an imperial tapered roller bearing, supplied in the original Timken branded box as pictured. Part of the 25500 series, this cone pairs with compatible cups including the 25520, 25521, 25521B, 25522, 25523, 25527, and 25528 to form a complete TS (Tapered Single) tapered roller bearing capable of supporting combined radial and axial loads.\u003c\/p\u003e\n\u003cp\u003ePer Timken published specifications, the 25590 has a cone bore (d) of 1.7960 in. and a cone width (B) of 1.0000 in. Construction is chrome steel with a stamped steel cage that separates the rollers to reduce friction and noise during operation. Operating temperature range is rated from 65 to 250 degrees F. ABMA precision rating is Class 2. UPC 053893216171.\u003c\/p\u003e\n\u003cp\u003eTapered roller bearings of this series are commonly used in wheel hubs, axle assemblies, gearboxes, differentials, pinion shafts, agricultural equipment, conveyor drives, and general industrial power transmission applications where opposing pairs are mounted to evenly distribute load across a shaft.\u003c\/p\u003e\n\u003cp\u003eBrand: Timken. Part Number: 25590. Type: Tapered Roller Bearing Cone. Series: 25500. Bore: 1.7960 in. Width: 1.0000 in. Cage: Stamped Steel. Material: Chrome Steel. Compatible Cups: 25520, 25521, 25521B, 25522, 25523, 25527, 25528. Cone only, cup sold separately.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-231\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144687856,"sku":"m00231","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00231-1.jpg?v=1775507181"},{"product_id":"timken-bearing-lm67010-id-31-75-mm-od-59-13-mm-width-15-88-mm-new-0226-202","title":"Timken Bearing LM67010 ID 31.75 mm × OD 59.13 mm × Width 15.88 mm NEW m00202","description":"\u003cp\u003eThe Timken LM67048 is a single tapered roller bearing cone, the inner ring assembly used as one half of a separable tapered roller bearing arrangement. It pairs with compatible cups in the LM67010, LM67010B, LM67010BA, and LM67014 series to form a complete single row tapered roller bearing assembly. Designed to support combined radial and axial loads on a rotating shaft, this cone is commonly mounted in opposing pairs to evenly distribute loading across the shaft system.\u003c\/p\u003e\n\u003cp\u003eManufactured by Timken in the United States, the LM67048 features a 1.2500 in. bore and a 0.660 in. cone width. The cone is part number LM67048 in the LM67000 series and carries an ABMA Class 2 precision rating. Construction includes a stamped steel cage that evenly spaces the tapered rollers to reduce friction, vibration, and noise during operation. The open configuration allows lubrication to be applied in place, and the assembly is rated for an operating temperature range of 54 degrees C to 120 degrees C.\u003c\/p\u003e\n\u003cp\u003eTypical applications include automotive wheel bearings, transmissions, differentials, conveyor systems, agricultural equipment, construction machinery, and other industrial assemblies requiring combined load support at moderate speeds. The component arrives in original Timken retail packaging marked LM67048 with the manufacturer barcode visible on the box label.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-202\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144786160,"sku":"m00202","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00202-1.jpg?v=1775505830"},{"product_id":"timken-lm67010-bearing-31-75mm-id-x-59-13mm-od-x-15-88mm-width-new-0226-203","title":"Timken LM67010 Bearing – 31.75mm ID x 59.13mm OD x 15.88mm Width – New m00203","description":"\u003cp\u003eThe Timken LM67048 is a single tapered roller bearing cone, the inner ring assembly used as one half of a separable tapered roller bearing arrangement. It pairs with compatible cups in the LM67010, LM67010B, LM67010BA, and LM67014 series to form a complete single row tapered roller bearing assembly. Designed to support combined radial and axial loads on a rotating shaft, this cone is commonly mounted in opposing pairs to evenly distribute loading across the shaft system.\u003c\/p\u003e\n\u003cp\u003eManufactured by Timken in the United States, the LM67048 features a 1.2500 in. bore and a 0.660 in. cone width. The cone is part number LM67048 in the LM67000 series and carries an ABMA Class 2 precision rating. Construction includes a stamped steel cage that evenly spaces the tapered rollers to reduce friction, vibration, and noise during operation. The open configuration allows lubrication to be applied in place, and the assembly is rated for an operating temperature range of 54 degrees C to 120 degrees C.\u003c\/p\u003e\n\u003cp\u003eTypical applications include automotive wheel bearings, transmissions, differentials, conveyor systems, agricultural equipment, construction machinery, and other industrial assemblies requiring combined load support at moderate speeds. The component arrives in original Timken retail packaging marked LM67048 with the manufacturer barcode visible on the box label.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eStock # 0226-203\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144950000,"sku":"m00203","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00203-1.jpg?v=1775505830"},{"product_id":"timken-lm67010-bearing-31-75mm-id-x-59-13mm-od-x-15-88mm-width-0226-204","title":"Timken LM67010 Bearing – 31.75mm ID x 59.13mm OD x 15.88mm Width","description":"\u003cp\u003eThe Timken LM67048 is a single tapered roller bearing cone, the inner ring assembly used as one half of a separable tapered roller bearing arrangement. It pairs with compatible cups in the LM67010, LM67010B, LM67010BA, and LM67014 series to form a complete single row tapered roller bearing assembly. Designed to support combined radial and axial loads on a rotating shaft, this cone is commonly mounted in opposing pairs to evenly distribute loading across the shaft system.\u003c\/p\u003e\n\u003cp\u003eManufactured by Timken in the United States, the LM67048 features a 1.2500 in. bore and a 0.660 in. cone width. The cone is part number LM67048 in the LM67000 series and carries an ABMA Class 2 precision rating. Construction includes a stamped steel cage that evenly spaces the tapered rollers to reduce friction, vibration, and noise during operation. The open configuration allows lubrication to be applied in place, and the assembly is rated for an operating temperature range of 54 degrees C to 120 degrees C.\u003c\/p\u003e\n\u003cp\u003eTypical applications include automotive wheel bearings, transmissions, differentials, conveyor systems, agricultural equipment, construction machinery, and other industrial assemblies requiring combined load support at moderate speeds. The component arrives in original Timken retail packaging marked LM67048 with the manufacturer barcode visible on the box label.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-204\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144982768,"sku":"m00204","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00204-1.jpg?v=1775505831"},{"product_id":"koyo-5760-bearing-300mm-id-x-380mm-od-x-75mm-width-new-0226-205","title":"Koyo 5760 Bearing – 3 In. Bore x 1.815 In. Width – New","description":"\u003cp\u003eThe Koyo 5760 is a single row tapered roller bearing cone manufactured by JTEKT Corporation under the Koyo brand. This inch series cone features a 3 inch straight bore and a 1.815 inch cone width, and is part of the Koyo 5700 series. The cone is designed to pair with a corresponding cup, typically the Koyo 5735, to form a complete single row tapered roller bearing assembly capable of supporting combined radial and axial loads in one direction.\u003c\/p\u003e\n\u003cp\u003eConstruction includes a chrome steel inner ring with cage and roller set. Per the manufacturer's published specifications, the assembled bearing carries a basic static load rating of 380,000 N and a basic dynamic load rating of 303,000 N. The maximum shaft fillet radius is 0.140 inch. The tapered geometry positions the apex of the rolling contact surfaces at a common point on the bearing center line, supporting heavy and impact loading typical of rolling mills, speed reducers, machine tool spindles, axle assemblies, and general industrial gear drives.\u003c\/p\u003e\n\u003cp\u003eManufactured in Japan and supplied in original Koyo packaging. The box is marked with part number 5760, UPC 605790040610, and a 05\/19 date code. Item is sold as a single cone only. The mating 5735 cup is not included unless otherwise specified.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-205\u003c\/p\u003e","brand":"Koyo","offers":[{"title":"Default Title","offer_id":48819145277680,"sku":"m00205","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00205-1.jpg?v=1775505832"},{"product_id":"timken-25590-bearing-1-7500in-id-x-0-8125in-width-new-0226-232","title":"Timken 25590 Bearing – 1.7500in ID x 0.8125in Width – New","description":"\u003cp\u003eThe Timken 25590 is a single cone (inner ring) assembly for an imperial tapered roller bearing, supplied in the original Timken branded box as pictured. Part of the 25500 series, this cone pairs with compatible cups including the 25520, 25521, 25521B, 25522, 25523, 25527, and 25528 to form a complete TS (Tapered Single) tapered roller bearing capable of supporting combined radial and axial loads.\u003c\/p\u003e\n\u003cp\u003ePer Timken published specifications, the 25590 has a cone bore (d) of 1.7960 in. and a cone width (B) of 1.0000 in. Construction is chrome steel with a stamped steel cage that separates the rollers to reduce friction and noise during operation. Operating temperature range is rated from 65 to 250 degrees F. ABMA precision rating is Class 2. UPC 053893216171.\u003c\/p\u003e\n\u003cp\u003eTapered roller bearings of this series are commonly used in wheel hubs, axle assemblies, gearboxes, differentials, pinion shafts, agricultural equipment, conveyor drives, and general industrial power transmission applications where opposing pairs are mounted to evenly distribute load across a shaft.\u003c\/p\u003e\n\u003cp\u003eBrand: Timken. Part Number: 25590. Type: Tapered Roller Bearing Cone. Series: 25500. Bore: 1.7960 in. Width: 1.0000 in. Cage: Stamped Steel. Material: Chrome Steel. Compatible Cups: 25520, 25521, 25521B, 25522, 25523, 25527, 25528. Cone only, cup sold separately.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-232\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819145605360,"sku":"m00232","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00232-1.jpg?v=1775507184"},{"product_id":"fag-30208-a-tapered-roller-bearing-40mm-id-x-80mm-od-x-19-75mm-width-new-0226-253","title":"FAG 30208-A Tapered Roller Bearing – 40mm ID x 80mm OD x 19.75mm Width – New m00253","description":"\u003cp\u003eThe FAG 30208-A is a single row metric tapered roller bearing produced by Schaeffler Group. This unit carries a 40 mm bore, 80 mm outside diameter, and 19.75 mm overall width, conforming to DIN ISO 355 and DIN 720 main dimensions for the 302 series. The barcode label identifies the unit as made in Hungary, with package markings 0236K1219 and 0015447581 along with EAN 4012801039505. The bearing is a separable design consisting of an inner ring with cage and roller set (cone) and a separate outer ring (cup), allowing the two components to be mounted independently in mirror image with a second tapered roller bearing in X, O, or tandem arrangement. Conical raceways and tapered rollers allow the unit to accept combined radial and axial loads, with axial capacity in one direction. Published FAG catalog values include a dynamic radial load rating of 61,000 N, static radial load rating of 67,000 N, fatigue limit load of 7,600 N, limiting speed of 9,600 rpm, and reference speed of 5,900 rpm. The cage retains the rollers in a window arrangement. Common applications include gearboxes, wheel hubs, pumps, electric motors, conveyor drives, and general industrial machinery requiring rigid shaft guidance under combined loading. Sold as a single bearing, factory packaged in original FAG box with sealed label intact. Cross references include 30208, 30208JR, and 30208XL designations.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-253\u003c\/p\u003e","brand":"FAG","offers":[{"title":"Default Title","offer_id":48819201081584,"sku":"m00253","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00253-1.jpg?v=1775507839"},{"product_id":"fag-30208-a-tapered-roller-bearing-40mm-id-x-80mm-od-x-19-75mm-width-new-0226-254","title":"FAG 30208-A Tapered Roller Bearing – 40mm ID x 80mm OD x 19.75mm Width – New m00254","description":"\u003cp\u003eThe FAG 30208-A is a single row metric tapered roller bearing produced by Schaeffler Group. This unit carries a 40 mm bore, 80 mm outside diameter, and 19.75 mm overall width, conforming to DIN ISO 355 and DIN 720 main dimensions for the 302 series. The barcode label identifies the unit as made in Hungary, with package markings 0236K1219 and 0015447581 along with EAN 4012801039505. The bearing is a separable design consisting of an inner ring with cage and roller set (cone) and a separate outer ring (cup), allowing the two components to be mounted independently in mirror image with a second tapered roller bearing in X, O, or tandem arrangement. Conical raceways and tapered rollers allow the unit to accept combined radial and axial loads, with axial capacity in one direction. Published FAG catalog values include a dynamic radial load rating of 61,000 N, static radial load rating of 67,000 N, fatigue limit load of 7,600 N, limiting speed of 9,600 rpm, and reference speed of 5,900 rpm. The cage retains the rollers in a window arrangement. Common applications include gearboxes, wheel hubs, pumps, electric motors, conveyor drives, and general industrial machinery requiring rigid shaft guidance under combined loading. Sold as a single bearing, factory packaged in original FAG box with sealed label intact. Cross references include 30208, 30208JR, and 30208XL designations.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cp\u003e• Genuine FAG 30208-A bearing\u003cbr\u003e• Tapered roller design for combined radial and axial load support\u003cbr\u003e• Precision ground raceways for smooth operation\u003cbr\u003e• 40 mm inner diameter\u003cbr\u003e• 80 mm outer diameter\u003cbr\u003e• 19.75 mm overall width\u003cbr\u003e• Suitable for industrial and automotive replacement applications\u003cbr\u003e• New condition\u003c\/p\u003e\n\u003cp\u003eCommon Applications\u003c\/p\u003e\n\u003cp\u003eThe FAG 30208-A tapered roller bearing is commonly used in:\u003c\/p\u003e\n\u003cp\u003e• Gearboxes\u003cbr\u003e• Axle assemblies\u003cbr\u003e• Wheel hubs\u003cbr\u003e• Industrial drive systems\u003cbr\u003e• Agricultural equipment\u003cbr\u003e• Construction machinery\u003cbr\u003e• General rotating mechanical equipment\u003c\/p\u003e\n\u003cp\u003eTapered roller bearings are ideal where load direction control and axial positioning are critical.\u003c\/p\u003e\n\u003cp\u003eWhy Choose FAG 30208-A\u003c\/p\u003e\n\u003cp\u003eFAG bearings are known for consistent manufacturing standards, high load ratings, and reliable performance in industrial environments. The 30208-A model is a widely specified bearing size, making it a dependable replacement option when this exact part number is required.\u003c\/p\u003e\n\u003cp\u003eImportant Note\u003c\/p\u003e\n\u003cp\u003ePlease verify dimensions and part number compatibility before installation. Sold as shown.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-254\u003c\/p\u003e","brand":"FAG","offers":[{"title":"Default Title","offer_id":48819201147120,"sku":"m00254","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00254-1.jpg?v=1775507840"},{"product_id":"consolidated-bearings-3908-ci-double-row-angular-contact-bearing-40mm-x-62mm-x-12mm-new-0226-252","title":"Consolidated Bearings 3908 CI Double Row Angular Contact Bearing – 40mm x 62mm x 12mm – New","description":"\u003cp\u003eA precision thrust ball bearing from Consolidated Bearings Company, part number 3908, supplied new in the original factory box. Consolidated Bearings is an ISO 9001:2015 certified authorized Schaeffler and SKF distributor based in Cedar Knolls, New Jersey, supplying precision bearings to industrial OEMs and authorized distributors since 1932. The 3908 is a single direction thrust ball bearing with metric dimensions of 40 mm bore, 76 mm outside diameter, and 25 mm width, constructed with a standard steel cage and standard precision class. Designed for axial load applications, this bearing supports thrust loads in one direction and consists of a shaft washer, housing washer, and ball and cage assembly. Typical applications include vertical shaft assemblies, gearbox thrust support, machine tool spindles, automotive driveline components, crane hooks, and other industrial machinery requiring axial load capacity. The 40 x 76 x 25 mm envelope matches the standard 3908 designation used across major bearing manufacturers including SKF, INA, FAG, and Nachi, making this unit a direct interchange for equipment specifying any of those OEM 3908 thrust ball bearings. Suitable for maintenance, repair, and replacement applications across general industrial, automation, and power transmission systems. The retail packaging shows the Consolidated Precision Bearings branding and includes the 3908 part identifier with the original UPC barcode label intact.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-252\u003c\/p\u003e","brand":"Consolidated Bearings","offers":[{"title":"Default Title","offer_id":48819258491120,"sku":"m00252","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00252-1.jpg?v=1775507841"},{"product_id":"fag-30208-a-tapered-roller-bearing-40mm-id-x-80mm-od-x-19-75mm-width-0226-255","title":"FAG 30208-A Tapered Roller Bearing – 40mm ID x 80mm OD x 19.75mm Width","description":"\u003cp\u003eThe FAG 30208-A is a single row metric tapered roller bearing produced by Schaeffler Group. This unit carries a 40 mm bore, 80 mm outside diameter, and 19.75 mm overall width, conforming to DIN ISO 355 and DIN 720 main dimensions for the 302 series. The barcode label identifies the unit as made in Hungary, with package markings 0236K1219 and 0015447581 along with EAN 4012801039505. The bearing is a separable design consisting of an inner ring with cage and roller set (cone) and a separate outer ring (cup), allowing the two components to be mounted independently in mirror image with a second tapered roller bearing in X, O, or tandem arrangement. Conical raceways and tapered rollers allow the unit to accept combined radial and axial loads, with axial capacity in one direction. Published FAG catalog values include a dynamic radial load rating of 61,000 N, static radial load rating of 67,000 N, fatigue limit load of 7,600 N, limiting speed of 9,600 rpm, and reference speed of 5,900 rpm. The cage retains the rollers in a window arrangement. Common applications include gearboxes, wheel hubs, pumps, electric motors, conveyor drives, and general industrial machinery requiring rigid shaft guidance under combined loading. Sold as a single bearing, factory packaged in original FAG box with sealed label intact. Cross references include 30208, 30208JR, and 30208XL designations.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-255\u003c\/p\u003e","brand":"FAG","offers":[{"title":"Default Title","offer_id":48819258523888,"sku":"m00255","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00255-1.jpg?v=1775507842"},{"product_id":"fag-30208-a-tapered-roller-bearing-40mm-id-x-80mm-od-x-19-75mm-width-new-0226-256","title":"FAG 30208-A Tapered Roller Bearing – 40mm ID x 80mm OD x 19.75mm Width – New","description":"\u003cp\u003eThe FAG 30208-A is a single row metric tapered roller bearing produced by Schaeffler Group. This unit carries a 40 mm bore, 80 mm outside diameter, and 19.75 mm overall width, conforming to DIN ISO 355 and DIN 720 main dimensions for the 302 series. The barcode label identifies the unit as made in Hungary, with package markings 0236K1219 and 0015447581 along with EAN 4012801039505. The bearing is a separable design consisting of an inner ring with cage and roller set (cone) and a separate outer ring (cup), allowing the two components to be mounted independently in mirror image with a second tapered roller bearing in X, O, or tandem arrangement. Conical raceways and tapered rollers allow the unit to accept combined radial and axial loads, with axial capacity in one direction. Published FAG catalog values include a dynamic radial load rating of 61,000 N, static radial load rating of 67,000 N, fatigue limit load of 7,600 N, limiting speed of 9,600 rpm, and reference speed of 5,900 rpm. The cage retains the rollers in a window arrangement. Common applications include gearboxes, wheel hubs, pumps, electric motors, conveyor drives, and general industrial machinery requiring rigid shaft guidance under combined loading. Sold as a single bearing, factory packaged in original FAG box with sealed label intact. Cross references include 30208, 30208JR, and 30208XL designations.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-256\u003c\/p\u003e","brand":"FAG","offers":[{"title":"Default Title","offer_id":48819278217456,"sku":"m00256","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00256-1.jpg?v=1775507843"},{"product_id":"bower-bca-nu106m-cylindrical-roller-bearing-30mm-id-x-55mm-od-x-13mm-width-new-0226-257","title":"Bower BCA NU106M Cylindrical Roller Bearing – 30mm ID x 55mm OD x 13mm Width – New","description":"\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eThe Browning NU106M is a single row cylindrical roller bearing supplied in its original manufacturer box. Part number NU106M corresponds to a 100 series light duty cylindrical roller bearing with a 30 mm bore, 55 mm outside diameter, and 13 mm width. The M suffix indicates a machined brass cage, a feature typically specified for applications requiring higher load capacity, elevated operating temperatures, or higher rotational speeds than steel cage equivalents. The NU design configuration has two integral flanges on the outer ring and no flanges on the inner ring, allowing the bearing to accommodate axial displacement of the shaft in both directions relative to the housing. This separable construction permits independent mounting of the inner and outer rings, simplifying installation, removal, and maintenance in fitted applications. Cylindrical roller bearings of this style carry heavy radial loads while maintaining low cross sectional height and friction. Common applications include electric motors, gearboxes, pumps, compressors, machine tool spindles, and general industrial power transmission assemblies. The package shown is the original Browning yellow and black branded box with manufacturer label bearing the code 0817H775. Browning is a Regal Rexnord brand with a long history in mechanical power transmission components, including bearings, V belt drives, sheaves, and gearing. The bearing is offered as found in its original packaging with the catalog part number NU106M as marked on the box label.Stock # 0226-257\u003c\/span\u003e\u003c\/p\u003e","brand":"Bower (BCA Bearings)","offers":[{"title":"Default Title","offer_id":48819278250224,"sku":"m00257","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00257-1.jpg?v=1775507843"},{"product_id":"timken-395-tapered-roller-bearing-cone-1-3750-id-34-925-mm-new-0226-225","title":"Timken 395 Tapered Roller Bearing Cone – 1.3750\" ID (34.925 mm) – New","description":"\u003cp\u003eThe Timken 395 is a single cone (inner ring) component of a tapered roller bearing assembly, supplied new in the original Timken manufacturer box marked \"Tapered Roller Bearings.\" This cone is part of the Timken 395 series and is engineered to mate with compatible cups including the 394, 394A, 394AS, 3920, and 3920B to form a complete single tapered roller bearing capable of supporting combined radial and axial loads.\u003c\/p\u003e\n\u003cp\u003eConfirmed manufacturer specifications include a 2.5000 in. straight bore diameter, 0.8660 in. cone width, and a maximum shaft fillet radius of 0.14 in. The cone is built from high alloy bearing steel and features a one piece stamped steel cage that retains the tapered rollers and spaces them evenly across the raceway. Dynamic load rating is 22,200 lbf and static load rating is 28,100 lbf when paired with a matched cup.\u003c\/p\u003e\n\u003cp\u003eTapered roller bearings of this series are commonly used in automotive axle systems, wheel hub assemblies, agricultural and construction equipment, industrial gearboxes, and conveyor drives where opposing pairs are mounted on a shaft to manage thrust loads in both directions. The 395 is an inch series cone covered by ABMA Standard 19.2 and ISO inch tapered roller bearing tolerance classes.\u003c\/p\u003e\n\u003cp\u003eUPC marking on this item is consistent with the original Timken packaging. The cone is supplied with the rollers retained and the bore protected for handling. Storage may show shelf wear on the outer box. The cup is sold separately.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-225\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819278381296,"sku":"m00225","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00225-1.jpg?v=1775507186"},{"product_id":"timken-5208k-double-row-angular-contact-bearing-40mm-id-x-80mm-od-x-30-2mm-width-new-0226-226","title":"Timken 5208K Double Row Angular Contact Bearing – 40mm ID x 80mm OD x 30.2mm Width – New","description":"\u003cp\u003eThe Timken 5208K is a double row angular contact ball bearing from the Fafnir 5200 Light Series, supplied here in its original Timken Ball Bearings box. This unit carries a 40 mm bore, 80 mm outside diameter, and 30.2 mm (1-3\/16 in.) ring width, with two rows of balls arranged at a 20 degree contact angle to support combined radial and bidirectional thrust loads. The conrad style construction allows the bearing to accommodate axial loads in either direction without the need for a duplex pairing, and the open closure with no snap ring enables in place lubrication and heat dissipation. Published ratings for the 5208K include a dynamic load capacity of 10,500 lb (radial) and a static load capacity of 7,650 lb, with a maximum operating speed of 5,000 RPM and a service temperature range of minus 50 to 120 degrees C. The steel cage spaces the rolling elements for reduced friction and noise across the load envelope. Typical applications for the Fafnir 5200 Light Series include electric motors, pumps, gear drives, fans, blowers, conveying equipment, and general industrial machinery where space is limited and average combined loads are present. MPN 5208K is widely cross referenced under Timken and Fafnir branding and is interchangeable with equivalent OEM callouts from other major bearing manufacturers in the 5208 size class. UPC 087796043428 corresponds to this part number.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-226\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819278414064,"sku":"m00226","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00226-1.jpg?v=1775507186"},{"product_id":"urb-32012-xa-tapered-roller-bearing-60mm-id-x-95mm-od-x-23mm-width-new-0226-258","title":"URB 32012 XA Tapered Roller Bearing – 60mm ID x 95mm OD x 23mm Width – New","description":"\u003cp\u003eThe Bower 32012 XA is a single row metric tapered roller bearing assembly with a 60 mm bore, 95 mm outside diameter, and 23 mm width. Supplied as a matched cone and cup set, this bearing is designed to support combined radial and axial loads in a single direction and is commonly mounted in opposing pairs on a shaft. The 32012 XA falls within the widely used 32000 series of ISO 355 metric tapered roller bearings, with verified interchange numbers including 32012X, 32012-X-XL, 4T-32012, HR32012, and 32012 JR across manufacturers such as NTN, SKF, FAG, Timken, Koyo, and NSK. Bower is a US produced premium tapered roller bearing brand operated under NTN-Bower with manufacturing plants in Macomb, IL and Hamilton, AL, and is specified by OEMs and heavy duty fleet managers across North America. Bower tapered roller bearings feature crowned precision rollers and raceways for low friction and even load distribution and meet or exceed ISO and ABMA standards. Typical applications for the 32012 size include heavy duty truck wheel ends, agricultural machinery, conveying equipment, electric motors, mining equipment, gear drives, elevators, rolling mills, and aggregate crushers. Per published manufacturer specifications for this size, basic dynamic load rating is approximately 83.8 kN, basic static load rating is approximately 121.5 kN, with limiting speeds of 3,800 rpm grease and 5,000 rpm oil. The label on the original packaging shows part number 32012 XA along with internal identifier 1114N776 and the URB legacy code. MPN: 32012 XA.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-258\u003c\/p\u003e","brand":"URB (Rulmenți Bârlad)","offers":[{"title":"Default Title","offer_id":48819278446832,"sku":"m00258","price":94.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00258-1.jpg?v=1775507844"},{"product_id":"timken-trd-3244-thrust-roller-bearing-2-000-id-x-2-750-od-x-0-078-width-new-0226-228","title":"Timken TRD-3244 Thrust Roller Bearing – 2.000\" ID x 2.750\" OD x 0.078\" Width – New","description":"\u003cp\u003eThe Timken Torrington TRD-3244 is a thrust roller bearing washer with a 2 inch inside diameter, 2-3\/4 inch outside diameter, and 1\/8 inch width. Manufactured in the USA, this washer is supplied as new old stock in the original Timken Torrington retail box with part number TRD-3244 and barcode 087796003637. Date code markings on the box label read 03W 22 051 with internal reference 01624935. The TR series washer is designed to function as a raceway surface in thrust needle roller bearing assemblies where adjacent shaft or housing components cannot serve as raceways. It can be configured as a shaft washer with bore piloting or as a housing washer with outside diameter piloting. Both faces are flush ground to support use as raceways on either side. The washer is produced from through hardened chromium bearing steel for dimensional stability under axial loading. Typical applications include machine tool drive shafts, automotive transmissions, steering gear assemblies, clutch packs, rotary tables, outboard propeller shafts, and industrial gearboxes. The TRD-3244 is the heavier section TR series washer in the 3244 dimensional family, with cross reference to Koyo TRD-3244 and INA TWD3244. Box label includes the manufacturer notation to lubricate before installation. Item shipped in original retail packaging.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-228\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819283001584,"sku":"m00228","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00228-1.jpg?v=1775507188"},{"product_id":"timken-bearing-25590-1-8125-in-id-x-3-2656-in-od-x-0-9375-in-width-new-0226-229","title":"Timken Bearing 25590 1.8125 in (ID) x 3.2656 in (OD) x 0.9375 in (Width) - NEW m00229","description":"\u003cp\u003eThe Timken 25590 is a single cone (inner ring) assembly for an imperial tapered roller bearing, supplied in the original Timken branded box as pictured. Part of the 25500 series, this cone pairs with compatible cups including the 25520, 25521, 25521B, 25522, 25523, 25527, and 25528 to form a complete TS (Tapered Single) tapered roller bearing capable of supporting combined radial and axial loads.\u003c\/p\u003e\n\u003cp\u003ePer Timken published specifications, the 25590 has a cone bore (d) of 1.7960 in. and a cone width (B) of 1.0000 in. Construction is chrome steel with a stamped steel cage that separates the rollers to reduce friction and noise during operation. Operating temperature range is rated from 65 to 250 degrees F. ABMA precision rating is Class 2. UPC 053893216171.\u003c\/p\u003e\n\u003cp\u003eTapered roller bearings of this series are commonly used in wheel hubs, axle assemblies, gearboxes, differentials, pinion shafts, agricultural equipment, conveyor drives, and general industrial power transmission applications where opposing pairs are mounted to evenly distribute load across a shaft.\u003c\/p\u003e\n\u003cp\u003eBrand: Timken. Part Number: 25590. Type: Tapered Roller Bearing Cone. Series: 25500. Bore: 1.7960 in. Width: 1.0000 in. Cage: Stamped Steel. Material: Chrome Steel. Compatible Cups: 25520, 25521, 25521B, 25522, 25523, 25527, 25528. Cone only, cup sold separately.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-229\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48824191680752,"sku":"m00229","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00229-1.png?v=1782936115"},{"product_id":"timken-bearing-trd-3244-3-1-4-in-id-x-4-1-2-in-od-x-1-8-in-width-new-0226-249","title":"Timken Bearing TRD-3244 3-1\/4 in ID x 4-1\/2 in OD x 1\/8 in Width - NEW m00249","description":"\u003cp\u003eThe Timken Torrington TRD-3244 is a TR series thrust roller bearing washer with a 2 inch inner diameter, 2 3\/4 inch outer diameter, and 1\/8 inch width (50.8 x 69.85 x 3.2 mm). Designed for use as a raceway surface with NTA-3244 needle roller and cage thrust assemblies in applications where adjacent shaft or housing surfaces cannot serve as raceways, this washer functions either as a shaft piloted bore washer or a housing piloted outer diameter washer. Both faces are flush ground to serve as raceways, enabling higher operating speeds and improved running accuracy compared to unground surfaces. Construction is low alloy, through hardened chromium bearing steel for resistance to deformation under heavy axial loads and elevated temperatures. The TR designation indicates a thicker washer profile within the Torrington TR series, paired with NTA 3244 cages rated for 2 inch bore thrust applications. Common uses include machine tool drive shafts, automotive steering gears and clutches, transmission assemblies, rotary tables, outboard motor propeller shafts, hydraulic pumps, and industrial gearboxes. Cross references include Koyo TRD-3244, INA compatible with TC3244 cage, and equivalents from Fafnir and other NTA 3244 thrust assembly suppliers. UPC 087796003637 appears on the original Torrington Timken packaging. Made in USA. New old stock in original Torrington Timken yellow and black box marked \"Lube Before Using.\" Package code 03W 22 051. Internal lot 01624935.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-249\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48824191713520,"sku":"m00249","price":61.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00249-1.png?v=1782936408"},{"product_id":"nsk-bearing-7210ctrdl-p4y-50-mm-id-x-90-mm-od-x-20-mm-width-new-0226-236","title":"NSK Bearing 7210CTRDL P4Y 50 mm ID x 90 mm OD x 20 mm Width - NEW","description":"\u003cp\u003eThe NSK 7210CTRDULP4Y is a super precision angular contact ball bearing supplied as a matched duplex pair, part of the NSK 7200 Series designed for high speed and high accuracy spindle applications. The bearing has a 50 mm bore, 90 mm outside diameter, and 20 mm width per bearing, with a 15 degree contact angle and DUL (universal back to back or face to face) matched arrangement. The P4 designation indicates ISO Class 4 precision tolerance, suited to machine tool spindles, grinding spindles, and other rotating equipment where minimal runout and stable high speed performance are required. Construction includes a phenolic resin cage and high grade steel rolling elements with super finished raceways. Published NSK specifications list a dynamic load rating of 45,000 N and a static load rating of 31,500 N per bearing, with maximum speeds of 16,500 rpm under grease lubrication and 25,000 rpm under oil lubrication, and an operating temperature limit of 120 degrees C. Typical applications include CNC machining center spindles, lathe spindles, milling spindle assemblies, grinder headstocks, and industrial high speed rotating equipment. Each unit is supplied in original sealed NSK packaging with carton labeling reading 7210CTRDULP4Y and the NSKHPS designation associated with the high performance super precision line. Item is new old stock in factory sealed box. Suitable as a direct replacement for matched duplex sets cross referenced from the NSK 7210CTRDULP4Y part number on machine tool spindle assemblies and equivalent OEM specifications.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-236\u003c\/p\u003e","brand":"NSK","offers":[{"title":"Default Title","offer_id":48824191746288,"sku":"m00236","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00236-1.png?v=1782936530"}],"url":"https:\/\/mroexchange.com\/collections\/bearings-small.oembed","provider":"MRO Exchange","version":"1.0","type":"link"}