{"title":"Surplus Industrial Bearings","description":"","products":[{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-152","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00152","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-152\u003c\/p\u003e","brand":"AMI Bearings","offers":[{"title":"Default Title","offer_id":48816996319472,"sku":"m00152","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1527.jpg?v=1771356938"},{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-153","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00153","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-153\u003c\/p\u003e","brand":"AMI Bearings","offers":[{"title":"Default Title","offer_id":48816996352240,"sku":"m00153","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1531.jpg?v=1771356926"},{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-154","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00154","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-154\u003c\/p\u003e","brand":"AMI Bearings","offers":[{"title":"Default Title","offer_id":48816996385008,"sku":"m00154","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1537.jpg?v=1771356912"},{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-155","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00155","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-155\u003c\/p\u003e","brand":"AMI Bearings","offers":[{"title":"Default Title","offer_id":48816996417776,"sku":"m00155","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1542.jpg?v=1771356897"},{"product_id":"ami-bearings-ucp207-22-pillow-block-bearing-1-3-8-in-bore-35mm-22-series-new-0226-156","title":"AMI Bearings UCP207-22 Pillow Block Bearing, 1-3\/8 in Bore (35mm), 22 Series – New m00156","description":"\u003cp\u003eThe AMI Bearings UCP207-22 is a set screw locking pillow block bearing unit with a 1-3\/8 inch (34.925 mm) bore, supplied new in the original AMI box with a manufacturing date code of 01\/19\/2016 and made in Japan. AMI Bearings is an Asahi company, and this unit pairs a wide inner ring chrome steel insert ball bearing with a cast iron two bolt pillow block housing. The insert bearing is secured to the shaft by two set screws positioned on the extended inner ring, and the housing includes a 45 degree grease fitting for re-lubrication of the bearing in service. Per AMI published catalog data, the UCP207-22 belongs to the UCP200 series and uses the P207 housing paired with a UC207-22 insert bearing. Common dimensional references for this unit include a height of approximately 3.622 inches (92 mm), a length of approximately 6.575 inches (167 mm), bolt to bolt spacing of approximately 4.961 inches (126 mm), and a 1\/2 inch bolt size. The UCP200 series is widely used in conveyor systems, agricultural machinery, material handling equipment, pumps, fan assemblies, HVAC systems, and general industrial machinery where mounted shaft support is required. The package is labeled with barcode 0808250113125 and the AMI Bearings Inc. branding. Specification values referenced above were sourced from AMI Bearings published catalog data for the UCP207 and UCP207-22 part numbers.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-156\u003c\/p\u003e","brand":"AMI Bearings, Inc.","offers":[{"title":"Default Title","offer_id":48816996483312,"sku":"m00156","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1547.jpg?v=1771356885"},{"product_id":"skf-7313-becbm-angular-contact-ball-bearing-65mm-id-x-140mm-od-x-33mm-width-new-0226-158","title":"SKF 7313 BECBM Angular Contact Ball Bearing – 65mm ID x 140mm OD x 33mm Width – New","description":"\u003cp\u003eThe SKF 7313 BECBM is a single row angular contact ball bearing from the SKF Explorer performance class, featuring a machined brass cage and a 40 degree contact angle. Bore diameter measures 65 mm, outside diameter 140 mm, and width 33 mm, placing it in the 73 series. The designation suffix breakdown is as follows: BE indicates single row angular contact geometry, CB denotes a configuration suitable for universal matching, and M identifies the machined brass cage. Manufactured in Austria as marked on the carton label, this bearing is part of SKF's Explorer line, the brand's premium performance designation for rolling bearings. Published manufacturer specifications list a dynamic load rating of 116 kN, static load rating of 80 kN, maximum reference speed of 6,300 RPM, and an ABEC 3 (ISO Class 6) precision tolerance. Operating temperature range is rated from 40 below zero to 212 degrees Fahrenheit. The bearing is supplied open, without seals or shields, with C0 normal internal radial clearance and a 2 mm fillet radius. Typical applications include machine tool spindles, pump shafts, gearbox assemblies, and other rotating equipment requiring combined radial and axial load support in one direction. Cage material is brass, rolling element and ring material is through hardened bearing steel. The bearing weight is approximately 5.2 lb per SKF documentation. Part number 7313 BECBM is the OEM SKF designation as marked on the original carton label.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-158\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816996581616,"sku":"m00158","price":181.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1556.jpg?v=1771356871"},{"product_id":"skf-6409-deep-groove-ball-bearing-45mm-id-x-120mm-od-x-29mm-width-new-0226-159","title":"SKF 6409 Deep Groove Ball Bearing – 45mm ID x 120mm OD x 29mm Width – New","description":"\u003cp\u003eThe SKF 6409 is a single row deep groove ball bearing in the 6400 heavy series, with a 45 mm bore, 120 mm outside diameter, and 29 mm width. The open design has no seals or shields and uses standard radial internal clearance (CN). Construction follows SKF's standard bearing steel specification with a cylindrical bore. This MPN is widely used in electric motors, gearboxes, pumps, fans, conveyors, and general industrial power transmission applications where higher radial load capacity is required than the 6200 or 6300 series can provide in the same bore size. The 6409 supports both radial loads and limited axial loads in either direction. SKF published specifications for this MPN include a limiting speed of 18,000 RPM and a net weight of approximately 1.537 kg. Suffixes that may appear on related SKF MPNs include \/C3 for increased internal clearance, \/C4 for further increased clearance, NR for snap ring groove with snap ring, and 2RS for double sealed configurations. The unit ships in its original SKF marked retail box bearing the model number 6409. Dimensional and technical specifications listed here are sourced from SKF published product data for the 6409 deep groove ball bearing. Buyers should verify clearance class, suffix code, and country of manufacture against application requirements before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-159\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816996614384,"sku":"m00159","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1561.jpg?v=1771357062"},{"product_id":"koyo-5760-tapered-roller-bearing-76-2mm-id-x-135-76mm-od-x-46-04mm-width-new-0226-160","title":"Koyo 5760 Tapered Roller Bearing, 76.2mm ID x 135.76mm OD x 46.04mm Width, New m00160","description":"\u003cp\u003eThe Koyo 5760 is a single row tapered roller bearing cone with a 3 inch straight bore and 1.815 inch cone width. Manufactured in Japan, this inch series component is the inner ring (cone) assembly portion of a tapered roller bearing set and is designed to pair with a matching cup such as the 5735 to complete the assembly. The 5700 series construction features chrome steel rollers guided by a stamped steel cage, with raceway and rolling element surfaces hardened for use under combined radial and axial loading. Published manufacturer data lists a basic dynamic load rating of 303,000 N and a basic static load rating of 380,000 N, with a maximum shaft fillet radius of 0.14 inch. The tapered geometry directs both radial and unidirectional thrust loads through the roller contact lines toward a common apex on the bearing axis, making this cone suitable for service in axle assemblies, gear reducers, machine tool spindles, agricultural and construction equipment wheel hubs, and similar industrial applications where heavy or impact loads are present. The 5760 part number is recognized across Koyo, Timken, NTN Bower, and other major inch series manufacturers as a dimensionally interchangeable single cone. Packaging shows a date code of 05\/19 and is marked Japan with UPC 605790 040. Supplied in original Koyo Bearings outer box.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-160\u003c\/p\u003e","brand":"Koyo Bearings","offers":[{"title":"Default Title","offer_id":48816996647152,"sku":"m00160","price":103.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1566.jpg?v=1771354464"},{"product_id":"koyo-jtekt-5760-5735-tapered-roller-bearing-set-76-20mm-id-x-135-73mm-od-x-44-45mm-width-new-0226-162","title":"Koyo 5760 Tapered Roller Bearing, 76.2mm ID x 135.76mm OD x 46.04mm Width - New m00162","description":"\u003cp\u003eThe Koyo 5760 is a single row tapered roller bearing cone with a 3 inch straight bore and 1.815 inch cone width. Manufactured in Japan, this inch series component is the inner ring (cone) assembly portion of a tapered roller bearing set and is designed to pair with a matching cup such as the 5735 to complete the assembly. The 5700 series construction features chrome steel rollers guided by a stamped steel cage, with raceway and rolling element surfaces hardened for use under combined radial and axial loading. Published manufacturer data lists a basic dynamic load rating of 303,000 N and a basic static load rating of 380,000 N, with a maximum shaft fillet radius of 0.14 inch. The tapered geometry directs both radial and unidirectional thrust loads through the roller contact lines toward a common apex on the bearing axis, making this cone suitable for service in axle assemblies, gear reducers, machine tool spindles, agricultural and construction equipment wheel hubs, and similar industrial applications where heavy or impact loads are present. The 5760 part number is recognized across Koyo, Timken, NTN Bower, and other major inch series manufacturers as a dimensionally interchangeable single cone. Packaging shows a date code of 05\/19 and is marked Japan with UPC 605790 040. Supplied in original Koyo Bearings outer box.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-162\u003c\/p\u003e","brand":"KOYO (JTEKT)","offers":[{"title":"Default Title","offer_id":48816996679920,"sku":"m00162","price":103.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1576.jpg?v=1771354591"},{"product_id":"skf-5410-a-double-row-angular-contact-ball-bearing-50mm-id-x-130mm-od-x-52mm-width-new-0226-163","title":"SKF 5410 A Double Row Angular Contact Ball Bearing – 50mm ID x 130mm OD x 52mm Width – New","description":"\u003cp\u003eThe SKF 5410 A is a double row angular contact ball bearing with a 50 mm bore, 130 mm outside diameter, and 58.7 mm width. The bearing carries the original SKF factory carton and label markings, with the part identifier 5410 A, date code 1998 09, and country of origin United States. The design corresponds to two single row angular contact ball bearings arranged back to back in a single unit, providing axial guidance in both directions while requiring less axial space than a paired single row arrangement.\u003c\/p\u003e\n\u003cp\u003eThis series is configured with a 30 degree contact angle, open construction with no integrated seals or shields, a stamped steel cage, and normal internal clearance. Inner ring and outer ring raceways accommodate simultaneously acting radial and axial loads, and the converging contact angle geometry increases the axial load carrying capacity relative to deep groove ball bearings of the same envelope. The bearing weight is approximately 3.7 kg.\u003c\/p\u003e\n\u003cp\u003eThe 5410 A is commonly applied in pumps, compressors, centrifuges, gearboxes, and general industrial machinery where two directional thrust and radial loading occur in combination. Dimensional standards conform to ISO 15. The unit is supplied in the original SKF box shown in the listing photographs. Buyers should reference the SKF 5410 A datasheet for full load rating, limiting speed, and mounting fit specifications applicable to their installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-163\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816996712688,"sku":"m00163","price":724.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1581.jpg?v=1771356046"},{"product_id":"fag-schaeffler-22207-e1-c3-spherical-roller-bearing-35mm-id-x-72mm-od-x-23mm-width-new-0226-175","title":"FAG 22207-E1-C3 Spherical Roller Bearing – 35mm ID x 72mm OD x 23mm Width – New m00175","description":"\u003cp\u003eThe FAG 22207-E1-C3 is a double row spherical roller bearing manufactured by Schaeffler in Germany. Bore diameter measures 35 mm, outside diameter 72 mm, and width 23 mm. The C3 suffix designates internal radial clearance greater than the standard CN class, suitable for applications involving thermal expansion, interference fits, or elevated operating temperatures. The E1 designation reflects the optimized internal geometry that increases dynamic load capacity over earlier 22200 series designs. Carton labeling identifies the unit as MPN 22207E1.C3*K1, supplied in original FAG packaging printed at Herzogenaurach, Germany.\u003c\/p\u003e\n\u003cp\u003eThe bearing features a cylindrical bore, sheet steel cage, and open (non sealed) construction. Two rows of symmetrical rollers run on a concave spherical raceway in the outer ring, allowing the assembly to accommodate static and dynamic shaft misalignment while supporting heavy radial loads and axial loads in both directions. Typical installation environments include gearboxes, fans, conveyors, vibrating screens, paper machinery, mining equipment, and general industrial drive trains where shaft deflection or housing misalignment is expected.\u003c\/p\u003e\n\u003cp\u003eManufacturer published reference data for the 22207-E1 series lists a basic dynamic load rating of approximately 89 kN, an operating temperature range from negative 30 to 200 degrees C, and a reference speed in the range of 10,700 rpm. Cross reference equivalents include SKF 22207 E\/C3 and NSK 22207 C\/C3. Confirm clearance class, cage material, and shaft fit requirements against the original application specification before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003cimg style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003c\/p\u003e\n\u003cp\u003eStock # 0226-175\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816996745456,"sku":"m00175","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1643.jpg?v=1771352652"},{"product_id":"fag-6011-2rsr-c3-deep-groove-ball-bearing-55mm-id-x-90mm-od-x-18mm-width-new-0226-176","title":"FAG 6011.2RSR.C3 Deep Groove Ball Bearing – 55mm ID x 90mm OD x 18mm Width – New","description":"\u003cp\u003eThe FAG 6011.2RSR.C3 is a single row deep groove ball bearing manufactured by FAG, a Schaeffler Group brand. Bore diameter is 55 mm, outer diameter is 90 mm, and width is 18 mm, per published Schaeffler specifications. The 2RSR designation indicates contact lip seals made from nitrile butadiene rubber on both sides, providing protection against contamination and lubricant loss in moderate speed applications. The C3 suffix denotes a radial internal clearance greater than the standard Normal class, suitable for applications involving elevated operating temperatures, interference fits, or higher rotational speeds where additional internal clearance is required to compensate for thermal expansion. Lubrication is grease for life. The bearing is supplied in its original FAG packaging marked with part number 6011.2RSR.C3, lot identifier 20070711, and EAN barcode 4012801068789. Typical applications include electric motors, gearboxes, pumps, fans, conveyors, and general industrial rotating equipment where a sealed, double sided protected radial ball bearing with increased internal clearance is specified. The 60 series places this item in the Extra Light dimension series under DIN 625 1, with a steel cage and cylindrical bore. Country of origin and date code information is as marked on the original box. No testing, condition, or performance claims are made beyond the published manufacturer specifications for this part number.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-176\u003c\/p\u003e","brand":"FAG","offers":[{"title":"Default Title","offer_id":48816996778224,"sku":"m00176","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1646.jpg?v=1771353033"},{"product_id":"sealmaster-tb-210-take-up-mounted-bearing-50mm-bore-new-0226-164","title":"Sealmaster TB-210 Tapped Base Pillow Block Bearing 50mm Bore – New","description":"\u003cp\u003eThe Sealmaster TB-210 is a Gold Line standard duty tapped base pillow block ball bearing with a 50 mm shaft bore. Catalog number 710097, UPC 662461053171, with a date code of 10 31 08 on the box label. The unit is supplied in its original Sealmaster factory packaging marked Set Screw, Gold Line, Standard.\u003c\/p\u003e\n\u003cp\u003eDesigned for applications where shafts are positioned close together, the tapped base TB series housing provides bolt down mounting from the underside of the support surface using threaded holes in the base rather than through bolts. The cast iron housing pairs with a 52100 bearing steel insert, black oxide coated for corrosion resistance. Locking to the shaft is achieved through Sealmaster set screws positioned at 120 degrees, with diamond faceted points for shaft retention. Sealing is provided by a patented felt lined flinger seal arrangement to retain lubricant and exclude contaminants.\u003c\/p\u003e\n\u003cp\u003eSealmaster Gold Line construction features include a zone hardened inner race under the ball path, a wide outer race for shock absorption, a metal land riding retainer, and the exclusive locking pin and dimple system that channels grease directly into the ball path through the outer ring. A zerk fitting provides relubrication access. The center line to base dimension is 2 1\/4 inches and the minimum bolt hole spacing is 4 inches.\u003c\/p\u003e\n\u003cp\u003eSuitable for use in conveyor systems, fans, blowers, agricultural equipment, food processing lines, packaging machinery, and general industrial machinery where a tapped base mount configuration is required. Compatible Sealmaster part number references include 710097 and the TB Series Standard Duty family.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-164\u003c\/p\u003e","brand":"SealMaster","offers":[{"title":"Default Title","offer_id":48816996810992,"sku":"m00164","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1586.jpg?v=1771355497"},{"product_id":"tr-bearing-ucf209-27-4-bolt-flange-mounted-bearing-1-11-16-in-bore-42-86mm-new-0226-165","title":"TR Bearing UCF209-27 4-Bolt Flange Mounted Bearing, 1-11\/16 in Bore (42.86mm) – New","description":"\u003cp\u003eA four bolt flange mounted ball bearing unit from TR Bearing, part number UCF209 27, featuring a 1-11\/16 inch shaft bore. The unit consists of a wide inner ring radial ball bearing insert pre-assembled into a square four bolt cast iron flange housing, designed for direct mounting onto vertical or side surfaces of equipment frames. The insert is secured to the shaft using two set screws located on the extended inner ring, providing a normal duty fixed expansion mount. Bore diameter measures 1-11\/16 inch (42.8625 mm), with a bolt center to center spacing of 4-1\/8 inch and an overall height of approximately 5-13\/32 inch. The cast iron housing includes a grease zerk fitting for relubrication during service. The UCF209-27 designation follows the standard UCF200 series interchange, cross referencing to AMI UCF209-27, NSK UCF209-27S, NTN UCF209-111T, Browning VF4S-227, Dodge F4B-SC-111, Sealmaster SF-1-11\/16, SKF FY-1-11\/16-TM, Link-Belt F3-U227N, and Peer FHSFJ209-27G. Typical applications include conveyor and transfer systems, packaging and automation equipment, agricultural machinery, and general light to medium duty material handling shafts where a four bolt square flange mount is required. Supplied in the original TR Bearing labeled retail box marked QTY 1, with barcode 1903431027716.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-165\u003c\/p\u003e","brand":"TR","offers":[{"title":"Default Title","offer_id":48816996843760,"sku":"m00165","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1591.jpg?v=1770822440"},{"product_id":"consolidated-bearings-nn-3013-kms-p-5-double-row-cylindrical-roller-bearing-65mm-id-x-100mm-od-x-26mm-width-new-0226-166","title":"Consolidated Bearings NN-3013-KMS P\/5 Double Row Cylindrical Roller Bearing – 65mm ID x 100mm OD x 26mm Width – New","description":"\u003cp\u003eThe Consolidated Bearings NN-3013-KMS P\/5 is a double row cylindrical roller bearing with a tapered bore, designed for high precision rotating applications including machine tool spindles, gearboxes, and rolling mill assemblies. The bearing measures 65 mm bore, 100 mm outside diameter, and 26 mm width. The K suffix designates a 1:12 tapered bore, the M suffix indicates a machined bronze cage, and the P\/5 designation corresponds to ABEC #5 precision with ABEC #7 running accuracy. Two ribs on the outer ring and three ribs on the inner ring guide the cylindrical rollers in a double row arrangement, providing high radial load capacity along with the ability to accommodate axial displacement between the inner and outer rings. The outer and inner rings are separable, simplifying installation and removal during spindle service. Published manufacturer specifications for the NN3013 size class indicate a dynamic radial load rating of approximately 76.5 kN and a static radial load rating of approximately 116 kN, with a reference speed rating in the 8,000 to 9,500 r\/min range depending on lubrication. Consolidated Bearings has distributed precision cylindrical roller bearings to OEM and MRO accounts in the United States since 1932. The unit is packaged in its original Consolidated branded carton and includes a barcode label marked NN-3013-K and a product label reading NN-3013-KMS P\/5 with UPC 644075076159. Common applications include CNC lathe and milling machine main spindles, grinding spindles, and precision indexing tables.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-166\u003c\/p\u003e","brand":"Consolidated Bearings","offers":[{"title":"Default Title","offer_id":48816996876528,"sku":"m00166","price":966.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1596.jpg?v=1771356854"},{"product_id":"skf-5312a-c3-double-row-angular-contact-ball-bearing-60mm-id-x-130mm-od-x-54mm-width-new-0226-167","title":"SKF 5312A\/C3 Double Row Angular Contact Ball Bearing – 60mm ID x 130mm OD x 54mm Width – New","description":"\u003cp\u003eThe SKF 5312 A\/C3 is a double row angular contact ball bearing with a 60 mm bore, 130 mm outside diameter, and 54 mm width. The unit is marked 5312 A\/C3 with date code 1989 03, batch marking 72 USA, and code BF01, indicating United States manufacture. It arrives new in original SKF factory packaging.\u003c\/p\u003e\n\u003cp\u003eThe 5312 A series uses two rows of balls arranged at a contact angle, allowing the bearing to support combined radial and axial loads in both directions in a single compact assembly. The C3 suffix designates internal radial clearance greater than Normal, suited to applications with elevated operating temperatures, interference fits, or thermal expansion across the inner and outer rings. Internal construction features solid steel inner and outer rings with a sheet steel cage and an open, non sealed design that accepts user applied grease or oil lubrication.\u003c\/p\u003e\n\u003cp\u003eTypical applications for SKF 5312 series double row angular contact ball bearings include pumps, compressors, gearboxes, electric motors, agricultural drives, and general industrial machine tool spindles where bi directional thrust capacity is required alongside radial load support. The 60 x 130 x 54 mm envelope makes the 5312 A\/C3 functionally interchangeable with the SKF 3312 A\/C3 and equivalents from MRC, NSK, NTN, FAG, and Koyo carrying the same metric size and clearance class.\u003c\/p\u003e\n\u003cp\u003ePackage markings, part number, and date code are visible in the listing photos. Buyers should verify required clearance class, cage type, and dimensional fit against their application specifications.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-167\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816996909296,"sku":"m00167","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1602.jpg?v=1771356002"},{"product_id":"fag-schaeffler-3212-bd-tvh-c3-double-row-angular-contact-ball-bearing-60mm-id-x-110mm-od-x-36-5mm-width-new-0226-168","title":"FAG 3212-BD-TVH-C3 Double Row Angular Contact Ball Bearing – 60mm ID x 110mm OD x 36.5mm Width – New","description":"\u003cp\u003eThe FAG 3212-BD-TVH-C3 is a double row angular contact ball bearing manufactured by Schaeffler in Slovakia. Carton markings identify the part as 3212-BD-TVH with C3 internal clearance and a quantity of one piece. The bearing carries production tracking codes 063712733-0030-02 and 4012802408805, along with internal references 0045K0128\/0011714248\/5577035 printed on the carton label.\u003c\/p\u003e\n\u003cp\u003ePer published Schaeffler specifications for the 32-BD series, this bearing has a 60 mm bore, 110 mm outer diameter, and 36.5 mm width. It uses two rows of balls in an O arrangement with a 30 degree contact angle, supporting combined radial and axial loads in both directions. The TVH suffix designates a moulded polyamide snap type cage that is rolling element riding. The C3 designation indicates internal radial clearance greater than standard CN, suited to applications running at elevated speeds or with thermal expansion at the inner ring.\u003c\/p\u003e\n\u003cp\u003eCommon applications for 32 series double row angular contact ball bearings include machine tool spindles, gearboxes, pumps, fans, agitators, and general industrial drive assemblies where simultaneous radial and bidirectional axial load capacity is required in a compact width. The bearing is supplied in the original FAG carton as shown.\u003c\/p\u003e\n\u003cp\u003eDimensional values listed above are sourced from manufacturer published specifications rather than direct measurement. Buyers should verify clearance class, cage type, and dimensions against their application before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-168\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816996942064,"sku":"m00168","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1609.jpg?v=1770822225"},{"product_id":"fag-schaeffler-6310-2rsr-c3-deep-groove-ball-bearing-50mm-id-x-110mm-od-x-27mm-width-new-0226-169","title":"FAG 6310.2RSR.C3 Deep Groove Ball Bearing – 50mm ID x 110mm OD x 27mm Width – New m00169","description":"\u003cp\u003eThe FAG 6310.2RSR.C3 is a single row deep groove ball bearing manufactured by Schaeffler Group with a 50 mm bore, 110 mm outside diameter, and 27 mm width. The 2RSR designation indicates contact rubber seals on both sides for lifetime lubrication and contamination protection in environments where dust, debris, or moisture exposure is a concern. The C3 suffix indicates greater than normal internal radial clearance, suited for applications involving thermal expansion, interference fits, or operating conditions where standard CN clearance is not appropriate. This bearing is part of the FAG 6300 medium series and is widely specified across electric motors, fans, blowers, pumps, gearboxes, conveyor systems, and general industrial machinery. The package is labeled with FAG production code 22100911 and carries the standard FAG branded retail packaging shown in the listing photos. Bore 50 mm, outside diameter 110 mm, width 27 mm. Sealed type 2RSR with rubber seals on both sides. Internal clearance class C3. Single row, open cage configuration internal to the seals. Functionally interchangeable with industry designations 6310 2RS C3, 6310 2RSR C3, and 63102RSRC3 across SKF, NSK, NTN, Koyo, and Timken equivalents within tolerance class specifications. Quantity reflected in the listing title is the unit count being offered. Buyers should verify the part number, internal clearance class, and seal type against application requirements before purchase.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-169\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816996974832,"sku":"m00169","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1614.jpg?v=1770822039"},{"product_id":"whittet-higgins-bear-lok-bl-24-bearing-locknut-for-2-3-8-in-shaft-new-0226-178","title":"Whittet-Higgins BEAR-LOK BL-24 Bearlok Retaining Nut for 2-3\/8 in Shaft – New","description":"\u003cp\u003eThe Whittet-Higgins BL-24 is a Bearlok mechanical lock retaining nut used to adjust, pre-load, and secure bearings and other power transmission components to shafts and spindles. The assembly consists of a base nut, a compression ring, and socket head cap screws. The base nut has a thick-walled main body and a thin, externally tapered, slit rear section. When the cap screws are tightened, the ring is drawn against the tapered back of the nut, driving the rear sections radially inward to uniformly clamp the threads against the shaft.\u003c\/p\u003e\n\u003cp\u003eConfirmed specifications per Whittet-Higgins published data include a 4.716 in. 12 TPI right hand UNS thread, a 6.500 in. outside diameter, a 5.430 in. face diameter, a 1.102 in. width, and a rated axial load capacity of 126,800 lbs. The unit uses M6 lock screws and is finished in manganese phosphate for corrosion resistance. The BL-24 replaces SKF AN24, standard AN24, and Taperline HTLN 24 PH and TLN 24 PH bearing locknuts.\u003c\/p\u003e\n\u003cp\u003eThis Bearlok meets and exceeds ANSI\/AFBMA Standard 8.1 1986 and ISO 2982 specifications and is RoHS compliant. Typical applications include high speed and high precision rotating assemblies, balanced spindles, gearboxes, pumps, off road and mining equipment, and other power transmission systems where uniform 360 degree thread clamping and resistance to loosening under vibration, shock, and torque are required. The unit ships as a one piece kit in original Whittet-Higgins packaging, UPC 0751968102403, lot 87833.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-178\u003c\/p\u003e","brand":"Whittet-Higgins BEAR-LOK","offers":[{"title":"Default Title","offer_id":48816997040368,"sku":"m00178","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00178-1.jpg?v=1775503050"},{"product_id":"fag-schaeffler-group-22212-e1a-xl-m-spherical-roller-bearing-60mm-id-x-110mm-od-x-28mm-width-new-0226-170","title":"FAG 22212-E1A-XL-M Spherical Roller Bearing – 60mm ID x 110mm OD x 28mm Width – New m00170","description":"\u003cp\u003eThe FAG 22212-E1A-XL-M is a double row spherical roller bearing in the 222 series, manufactured by Schaeffler Group in Germany. This unit features a 60 mm bore, 110 mm outside diameter, and 28 mm width, with a cylindrical (straight) bore configuration. The bearing uses a solid machined brass cage guided on the inner ring, designated by the \"M\" suffix, and carries the X life designation indicating Schaeffler's premium internal construction with optimized contact surfaces, higher grade steel, and refined rolling elements for increased load capacity and extended service life. The E1A internal design provides higher dynamic load ratings than standard 222 series geometry. Production identifiers visible on the packaging include 0200R0J16, batch reference 0028606848, and trace code 019015933 0000 02. The X life branding and original FAG factory carton confirm OEM packaging. Spherical roller bearings of this geometry accommodate misalignment between shaft and housing while supporting heavy radial loads and axial loads in both directions, making them common in gearboxes, fans, blowers, conveyors, vibrating screens, paper machinery, crushers, mining equipment, marine drives, and general heavy duty industrial machinery. The 22212 size class is widely used as a replacement bearing across power transmission, material handling, and process equipment applications. Cross references for this designation include 22212-E1-XL-M and legacy 22212-E1-M numbering. Item shown in factory sealed FAG box marked Made in Germany.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-170\u003c\/p\u003e","brand":"FAG (Schaeffler Group)","offers":[{"title":"Default Title","offer_id":48816997105904,"sku":"m00170","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1619_21ed639e-a384-4d3a-ae37-5f566f24bfc0.jpg?v=1770821913"},{"product_id":"fag-schaeffler-group-22212-e1a-xl-m-spherical-roller-bearing-60mm-id-x-110mm-od-x-28mm-width-new-0226-171","title":"FAG 22212-E1A-XL-M Spherical Roller Bearing – 60mm ID x 110mm OD x 28mm Width – New m00171","description":"\u003cp\u003eThe FAG 22212-E1A-XL-M is a spherical roller bearing manufactured in Germany by Schaeffler under the FAG brand and designated as part of the X-life product family. The bearing carries an inner diameter of 60 mm, an outer diameter of 110 mm, and a width of 28 mm. The 22212 designation places it within the 222 series of double row spherical roller bearings, while the E1A suffix indicates the optimized internal geometry developed by FAG for increased dynamic load capacity. The XL marking identifies the bearing as an X-life version, which incorporates higher grade rolling elements, raceway surfaces, and steel cleanliness compared to standard catalog production. The M suffix specifies a machined solid brass cage guided on the inner ring, a configuration commonly selected for applications involving higher operating temperatures, heavier loads, or environments where polymer cages are unsuitable. The bearing is supplied in its original FAG factory packaging with a cylindrical bore (no K suffix), open construction, and is marked with manufacturer date code 0200R0416 and batch identifiers 0028606848 and 019015933. Spherical roller bearings of this type are used in industrial gearboxes, fans, blowers, conveyors, vibrating equipment, pumps, paper machinery, and other heavy duty rotating assemblies that require accommodation of misalignment between the shaft and housing. The 22212 series is interchangeable across major bearing manufacturers under equivalent ISO dimensional standards. EAN 4026677807755.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-171\u003c\/p\u003e","brand":"FAG (Schaeffler Group)","offers":[{"title":"Default Title","offer_id":48816997138672,"sku":"m00171","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1623.jpg?v=1771352553"},{"product_id":"fag-schaeffler-group-22212-e1a-xl-m-spherical-roller-bearing-60mm-id-x-110mm-od-x-28mm-width-new-0226-172","title":"FAG 22212-E1A-XL-M Spherical Roller Bearing – 60mm ID x 110mm OD x 28mm Width – New","description":"\u003cp\u003eThe FAG 22212-E1A-XL-M is a double row spherical roller bearing manufactured by Schaeffler Group in Germany, identified by EAN 4026677807755. This X-life series unit measures 60 mm bore, 110 mm outside diameter, and 28 mm width, with a cylindrical (straight) bore designation. The E1A internal geometry represents an optimized design with increased roller and raceway contact area, while the M suffix indicates a one piece machined brass cage guided on the inner ring. The XL marking denotes Schaeffler's X-life premium designation, reflecting upgraded steel grade, surface finish, and dimensional tolerances over standard catalog spherical roller bearings.\u003c\/p\u003e\n\u003cp\u003eSpherical roller bearings of this configuration accommodate heavy radial loads and axial loads in both directions, and the inherent self aligning capability compensates for shaft deflection and mounting misalignment between the bore and housing. Two rows of symmetrical barrel rollers operate against a common concave outer raceway, allowing the inner ring to articulate within the outer ring under load.\u003c\/p\u003e\n\u003cp\u003eTypical applications include gearbox shafts, fan and blower assemblies, conveyor pulleys, crusher shafts, paper machinery, vibrating screens, and general heavy duty industrial drive trains. The X-life specification supports higher dynamic load ratings and extended service intervals compared to standard 22212 series units.\u003c\/p\u003e\n\u003cp\u003ePackage markings include traceability codes 0200R0416 \/ 0028606848 \/ 019015933 0000 02. The unit is supplied in original FAG factory packaging. MPN: 22212-E1A-XL-M. Country of origin: Germany.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-172\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816997204208,"sku":"m00172","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1629.jpg?v=1771352527"},{"product_id":"fag-schaeffler-6310-2rsr-c3-deep-groove-ball-bearing-50mm-id-x-110mm-od-x-27mm-width-new-0226-173","title":"FAG 6310.2RSR.C3 Deep Groove Ball Bearing – 50mm ID x 110mm OD x 27mm Width – New","description":"\u003cp\u003eThe FAG 6310.2RSR.C3 is a single row deep groove ball bearing with rubber contact seals on both sides and C3 internal clearance. Dimensions per manufacturer published specifications are 50 mm bore, 110 mm outside diameter, and 27 mm width. The 2RSR seal designation indicates rubber sealing on each side of the bearing, providing protection against contaminants and helping retain factory grease lubrication. The C3 suffix denotes a radial internal clearance greater than the Normal class, suitable for applications involving elevated operating temperatures, interference fits on the shaft or housing, or higher rotational speeds where additional internal clearance accommodates thermal expansion.\u003c\/p\u003e\n\u003cp\u003eMarked 6310.2RSR.C3 with manufacturing code 01090111 and country of origin South Korea. Branded with the FAG logo, part of the Schaeffler Group. Barcode 4012801165518 is present on the package label.\u003c\/p\u003e\n\u003cp\u003eThis medium series 6300 family bearing is widely used in electric motors, gearboxes, pumps, fans, conveyors, agricultural machinery, and general industrial power transmission applications. The deep groove geometry supports radial loads and limited axial loads in both directions, making it a versatile choice for shaft support in rotating equipment. The sealed design reduces the need for relubrication during service life. Cross reference designations commonly associated with this part include 6310 2RS C3, 6310 2RSR C3, and 63102RSRC3. Buyer is responsible for verifying specifications and suitability for the intended application before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-173\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816997433584,"sku":"m00173","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1634.jpg?v=1771352839"},{"product_id":"barden-nn3020km-precision-cylindrical-roller-bearing-100mm-id-x-150mm-od-x-37mm-width-new-0226-179","title":"Barden NN3020KM SP51W33 Precision Cylindrical Roller Bearing – 100mm ID x 150mm OD x 37mm Width – New","description":"\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eThe Beaver Precision NN3020KM SP51W33 is a double row cylindrical roller bearing designed for machine tool main spindle applications where high radial load capacity, rigidity, and running accuracy are required. Bore diameter measures 100 mm, outside diameter measures 150 mm, and width measures 37 mm, conforming to standard NN30 series dimensions for this size. The K suffix designates a 1:12 tapered bore that allows the user to set radial internal clearance precisely by drawing the inner ring up the tapered shaft. The M designation indicates a machined brass cage that is roller guided, suitable for higher rotational speeds and higher operating temperatures than polymer cages. SP class corresponds to ISO P5 dimensional accuracy and ISO P4 running accuracy. The W33 suffix indicates an annular lubrication groove and three lubrication holes in the outer ring, allowing relubrication during service without disassembly. The double row configuration places two rows of cylindrical rollers between a triple ribbed inner ring and a separable plain outer ring, providing high radial stiffness in a compact axial envelope. The outer ring is separable from the inner ring assembly, which simplifies mounting and dismounting in spindle housings. Typical applications include lathe spindles, milling machine spindles, grinding machine work heads, machining center spindles, and other precision rotating assemblies. The part number NN3020KM SP51W33 appears on the original Beaver Precision box label. Cross references include SKF NN3020 KTN9\/SP, FAG NN3020 AS K M SP, NSK NN3020MBKRE44CC1P4, and NTN NN3020K.Stock # 0226-179\u003c\/span\u003e\u003c\/p\u003e","brand":"Barden","offers":[{"title":"Default Title","offer_id":48816997499120,"sku":"m00179","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1661.jpg?v=1771351710"},{"product_id":"fag-schaeffler-22207-e1-c3-spherical-roller-bearing-35mm-id-x-72mm-od-x-23mm-width-new-0226-174","title":"FAG 22207-E1-C3 Spherical Roller Bearing – 35mm ID x 72mm OD x 23mm Width – New m00174","description":"\u003cp\u003eThe FAG 22207-E1-C3 is a double row spherical roller bearing manufactured by Schaeffler in Germany. Bore diameter measures 35 mm, outside diameter 72 mm, and width 23 mm. The C3 suffix designates internal radial clearance greater than the standard CN class, suitable for applications involving thermal expansion, interference fits, or elevated operating temperatures. The E1 designation reflects the optimized internal geometry that increases dynamic load capacity over earlier 22200 series designs. Carton labeling identifies the unit as MPN 22207E1.C3*K1, supplied in original FAG packaging printed at Herzogenaurach, Germany.\u003c\/p\u003e\n\u003cp\u003eThe bearing features a cylindrical bore, sheet steel cage, and open (non sealed) construction. Two rows of symmetrical rollers run on a concave spherical raceway in the outer ring, allowing the assembly to accommodate static and dynamic shaft misalignment while supporting heavy radial loads and axial loads in both directions. Typical installation environments include gearboxes, fans, conveyors, vibrating screens, paper machinery, mining equipment, and general industrial drive trains where shaft deflection or housing misalignment is expected.\u003c\/p\u003e\n\u003cp\u003eManufacturer published reference data for the 22207-E1 series lists a basic dynamic load rating of approximately 89 kN, an operating temperature range from negative 30 to 200 degrees C, and a reference speed in the range of 10,700 rpm. Cross reference equivalents include SKF 22207 E\/C3 and NSK 22207 C\/C3. Confirm clearance class, cage material, and shaft fit requirements against the original application specification before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-174\u003c\/p\u003e","brand":"FAG (Schaeffler)","offers":[{"title":"Default Title","offer_id":48816997531888,"sku":"m00174","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1639.jpg?v=1771352640"},{"product_id":"mrc-5210mg-double-row-angular-contact-ball-bearing-50mm-id-x-90mm-od-x-30mm-width-new-0226-180","title":"MRC 5210MG Double Row Angular Contact Ball Bearing – 50mm ID x 90mm OD x ~30mm Width – New","description":"\u003cp\u003eThe MRC 5210MG is a double row angular contact ball bearing from the 5200M Light series, designed for applications requiring combined radial and bi-directional thrust load capacity. This unit features a 50 mm bore, 90 mm outside diameter, and 30.16 mm width, with a 30 degree contact angle and an internal snap ring groove for axial location in the housing. Construction is chrome steel with a pressed steel cage, open enclosure, and C3 internal clearance. The bearing carries an ABEC 1 precision rating as marked on the original packaging. Per manufacturer published specifications, dynamic load rating is 53,900 N and static load rating is 58,500 N, with a maximum operating speed of 6,300 RPM and a temperature limit of 450 degrees F. The MRC 5200M series uses two rows of balls arranged in a back to back configuration, providing performance similar to two single row angular contact bearings mounted together. Thrust loads should be carried on the non filling notch row, with moderate thrust permissible on the filling notch row. Common applications include machine tool spindles, drill presses, gearboxes, pumps, and other industrial power transmission assemblies where combined loads and rigid shaft support are required. The item is supplied in its original MRC factory branded box marked 5210MG STEEL\/C3\/ABEC 1 with the 317E suffix code. The bore inside diameter measures 1.969 in. and the outside diameter measures 3.543 in. per published dimensional data. MRC bearings are produced under the SKF group and are a recognized OEM source for replacement ball bearings used across general industrial, machine tool, and MRO applications.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-180\u003c\/p\u003e","brand":"MRC","offers":[{"title":"Default Title","offer_id":48816997564656,"sku":"m00180","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1666.jpg?v=1771354827"},{"product_id":"sealmaster-tb-210-take-up-mounted-bearing-50mm-bore-210-series-insert-new-0226-182","title":"Sealmaster TB-210 Take-Up Mounted Bearing, 50mm Bore (210 Series Insert) – New m00182","description":"\u003cp\u003eThe Sealmaster TB-210 is a Gold Line tapped base pillow block bearing built around a 50 mm bore mounted ball bearing. The cast iron housing features a tapped base design well suited for applications where shafts are positioned close together, and the unit incorporates Sealmaster's setscrew locking method with 120 degree setscrew position and precision ground, diamond faceted setscrews per published manufacturer specifications. Internal components use 52100 high quality bearing steel with a black oxide corrosion resistant race, zone hardened inner race, and a unique metal land riding retainer. The patented felt lined flinger seal provides a differentiated lubrication and sealing system, identified on the box label as Standard felt seal configuration. The Gold Line designation indicates Sealmaster's standard duty product line carrying part number 710097, with barcode 662461053171 visible on the original packaging. The unit measures a 2 1\/4 in center line to base dimension with a 4 in minimum bolt hole spacing range per Applied Industrial Technologies published specifications. Applications include conveyor systems, fans, blowers, agricultural equipment, material handling machinery, and general industrial power transmission shafting where a compact two bolt tapped base mounting footprint is required. The TB Series falls within Sealmaster's standard duty mounted ball bearing offering manufactured under the Regal Rexnord brand portfolio. Item ships in original Sealmaster Gold Line factory packaging with set screw locking, 6 24 16 date code, and 11:13AM production timestamp printed on the box label.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-182\u003c\/p\u003e","brand":"SealMaster","offers":[{"title":"Default Title","offer_id":48816997597424,"sku":"m00182","price":394.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1676.jpg?v=1771355455"},{"product_id":"sealmaster-tb-210-take-up-mounted-bearing-50mm-bore-210-series-insert-new-0226-183","title":"SealMaster TB-210 Take-Up Mounted Bearing, 50mm Bore (210 Series Insert) – New","description":"\u003cp\u003eThe Sealmaster TB-210 is a Gold Line tapped base pillow block bearing built around a 50 mm bore mounted ball bearing. The cast iron housing features a tapped base design well suited for applications where shafts are positioned close together, and the unit incorporates Sealmaster's setscrew locking method with 120 degree setscrew position and precision ground, diamond faceted setscrews per published manufacturer specifications. Internal components use 52100 high quality bearing steel with a black oxide corrosion resistant race, zone hardened inner race, and a unique metal land riding retainer. The patented felt lined flinger seal provides a differentiated lubrication and sealing system, identified on the box label as Standard felt seal configuration. The Gold Line designation indicates Sealmaster's standard duty product line carrying part number 710097, with barcode 662461053171 visible on the original packaging. The unit measures a 2 1\/4 in center line to base dimension with a 4 in minimum bolt hole spacing range per Applied Industrial Technologies published specifications. Applications include conveyor systems, fans, blowers, agricultural equipment, material handling machinery, and general industrial power transmission shafting where a compact two bolt tapped base mounting footprint is required. The TB Series falls within Sealmaster's standard duty mounted ball bearing offering manufactured under the Regal Rexnord brand portfolio. Item ships in original Sealmaster Gold Line factory packaging with set screw locking, 6 24 16 date code, and 11:13AM production timestamp printed on the box label.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-183\u003c\/p\u003e","brand":"SealMaster","offers":[{"title":"Default Title","offer_id":48816997859568,"sku":"m00183","price":394.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1681.jpg?v=1771355085"},{"product_id":"skf-6019-2z-c3-deep-groove-ball-bearing-95mm-id-x-145mm-od-x-24mm-width-new-0226-184","title":"SKF 6019-2Z\/C3 Deep Groove Ball Bearing – 95mm ID x 145mm OD x 24mm Width – New","description":"\u003cp\u003eThe SKF 6019-2Z\/C3 is a single row deep groove ball bearing with metal shields on both sides and C3 internal clearance. The bearing measures 95 mm bore, 145 mm outside diameter, and 24 mm width. Manufactured in France and supplied in original SKF Explorer packaging, this part number designates a shielded configuration (2Z) with radial internal clearance greater than normal (C3), making it suited for applications involving thermal expansion, higher operating temperatures, or elevated rotational speeds. The deep groove geometry supports both radial and axial loads in either direction, and the steel cage maintains consistent ball spacing for load distribution and reduced friction.\u003c\/p\u003e\n\u003cp\u003eCommon applications include electric motors, gearboxes, pumps, compressors, fans, blowers, conveyors, and general industrial machinery where shielded protection against contamination is required and lubricant retention is needed. The metal shields are non contact, allowing higher speed capability than rubber sealed variants while still protecting against debris ingress.\u003c\/p\u003e\n\u003cp\u003eSpecifications include a bore diameter of 95 mm, outside diameter of 145 mm, width of 24 mm, two metal shields, C3 clearance class, and standard SKF Explorer performance grade. The MPN 6019-2Z\/C3 is the SKF reference designation and is cross referenced by FAG, NSK, Timken, and NTN equivalents in the same series and clearance class. Country of origin marking on the box reads 21-MADE IN FRANCE.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-184\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816997990640,"sku":"m00184","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1686.jpg?v=1771357011"},{"product_id":"skf-22316-e-spherical-roller-bearing-80mm-id-x-170mm-od-x-58mm-width-new-0226-185","title":"SKF 22316 E Spherical Roller Bearing – 80mm ID x 170mm OD x 58mm Width – New","description":"\u003cp\u003eThe SKF 22316 E is a double row spherical roller bearing from SKF's Explorer performance class, identified by UPC 7316576654138 on the manufacturer packaging. Manufactured in Great Britain, this unit carries an 80 mm bore, 170 mm outside diameter, and 58 mm width, with a straight cylindrical bore, open (unsealed) construction, and a stamped steel cage. Normal radial internal clearance (CN) applies to the standard 22316 E designation. Published SKF specifications list a dynamic load rating of 490 kN, a static load rating of 540 kN, and a fatigue load rating of 54 kN, with a reference speed of 3000 r\/min and a limiting speed of 4000 r\/min. The optimized internal geometry and flangeless inner ring of the E series are designed to accommodate combined radial and axial loads, with self aligning capability to compensate for shaft misalignment and deflection. Common applications for the 22316 E include gearboxes, fans, pumps, vibrating screens, conveyors, paper machinery, and other heavy duty rotating equipment where high radial load capacity and shaft misalignment tolerance are required. The bearing ships in its original SKF Explorer branded box with factory part number and barcode label intact, MPN 22316 E shown on the carton label. Item identification was confirmed directly from the manufacturer packaging.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-185\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816998088944,"sku":"m00185","price":288.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1691.jpg?v=1771355906"},{"product_id":"timken-432d-tapered-roller-bearing-cup-95-25mm-od-x-50-80mm-width-new-0226-186","title":"Timken 432D Tapered Roller Bearing Cup – 95.25mm OD x 50.80mm Width – New m00186","description":"\u003cp\u003eRated for a 3.4843 in. outer diameter and 1-5\/16 in. width, the Timken 4320 is a Series 435 single cup outer race used in the assembly of single row tapered roller bearings. The cup pairs with a separately sold cone (inner race) assembly to form a complete bearing capable of carrying both radial and thrust loads. Manufacturer published specifications include a 0.130 in. maximum housing fillet radius and standard tolerance class. Construction is Timken high alloy bearing steel with an open configuration that allows for in-place lubrication and endplay or preload adjustment during equipment assembly. The 4320 part number is the market recognized OEM identifier for this Series 435 cup and is referenced consistently across industrial distributor catalogs including Applied, Eastern Industrial Automation, and Monarch Bearing. The cup is supplied in original Timken Tapered Roller Bearings packaging marked 4320 with lot code 200107 22. Single row tapered roller bearings of this size are commonly applied in vehicle axles, transmissions, wheel hubs, industrial gearboxes, conveyor drives, and other mechanical power transmission applications calling for combined load capacity. Operating temperature range per published Timken data is 65 to 250 degrees F. The 4320 2 variant referenced by some distributors corresponds to the same Series 435 cup with a different packaging or precision designation. This item is the cup only and does not include a matching cone.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-186\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48816998121712,"sku":"m00186","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1696.jpg?v=1771356833"},{"product_id":"timken-432d-tapered-roller-bearing-cup-95-25mm-od-x-50-80mm-width-new-0226-187","title":"Timken 432D Tapered Roller Bearing Cup – 95.25mm OD x 50.80mm Width – New","description":"\u003cp\u003eRated for a 3.4843 in. outer diameter and 1-5\/16 in. width, the Timken 4320 is a Series 435 single cup outer race used in the assembly of single row tapered roller bearings. The cup pairs with a separately sold cone (inner race) assembly to form a complete bearing capable of carrying both radial and thrust loads. Manufacturer published specifications include a 0.130 in. maximum housing fillet radius and standard tolerance class. Construction is Timken high alloy bearing steel with an open configuration that allows for in-place lubrication and endplay or preload adjustment during equipment assembly. The 4320 part number is the market recognized OEM identifier for this Series 435 cup and is referenced consistently across industrial distributor catalogs including Applied, Eastern Industrial Automation, and Monarch Bearing. The cup is supplied in original Timken Tapered Roller Bearings packaging marked 4320 with lot code 200107 22. Single row tapered roller bearings of this size are commonly applied in vehicle axles, transmissions, wheel hubs, industrial gearboxes, conveyor drives, and other mechanical power transmission applications calling for combined load capacity. Operating temperature range per published Timken data is 65 to 250 degrees F. The 4320 2 variant referenced by some distributors corresponds to the same Series 435 cup with a different packaging or precision designation. This item is the cup only and does not include a matching cone.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-187\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48816998187248,"sku":"m00187","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1702.jpg?v=1771356170"},{"product_id":"consolidated-bearings-nn-3019-ms-p-5-double-row-cylindrical-roller-bearing-95mm-id-x-145mm-od-x-37mm-width-new-0226-188","title":"Consolidated Bearings NN-3019 MS P\/5 Double Row Cylindrical Roller Bearing – 95mm ID x 145mm OD x 37mm Width – New","description":"\u003cp\u003eThe Consolidated Bearings NN-3019 MS P\/5 is a double row super-precision cylindrical roller bearing with a cylindrical bore, manufactured to ABEC 5 (P5) precision class. This NN series bearing is intended for high-stiffness, high-accuracy applications, most commonly machine tool spindles, gear reducers, and other precision rotating equipment where rigidity and concentricity are critical. The MS designation indicates a machined brass cage configuration. Per published manufacturer specifications, the NN-3019 envelope is 95 mm bore by 145 mm outside diameter by 37 mm width. The double row roller arrangement provides high radial load carrying capacity within a compact cross section, and the design allows separation of the inner ring from the outer ring assembly for easier mounting and dismounting. The bearing is supplied in its original Consolidated Bearings retail packaging with barcode 6 44075 07588. The outer box shows cosmetic shelf wear and label staining consistent with surplus storage, while the bearing assembly remains sealed inside the original inner packaging. UPC 644075075888 is associated with this part number on the Consolidated Bearings catalog. Cross-referenced equivalents from other manufacturers include the SKF NN 3019 KTN9\/SPW33, NSK NN 3019 MBKRCC1P5, and FAG NN3019-AS-K-M-SP, all sharing the same 95 x 145 x 37 mm envelope and double row super-precision construction. Suitable for replacement service in precision spindle assemblies and other applications calling for an NN 30 series P5 class cylindrical roller bearing.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-188\u003c\/p\u003e","brand":"Consolidated Bearing","offers":[{"title":"Default Title","offer_id":48816998220016,"sku":"m00188","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1707.jpg?v=1771351501"},{"product_id":"skf-7210-becby-angular-contact-ball-bearing-50mm-id-x-90mm-od-x-20mm-width-new-0226-189","title":"SKF 7210 BECBY Angular Contact Ball Bearing – 50mm ID x 90mm OD x 20mm Width – New m00189","description":"\u003cp\u003eThe SKF 7210 BECBY is a single row angular contact ball bearing with a 50 mm bore, 90 mm outside diameter, and 20 mm width. The designation indicates a 40 degree contact angle (B), a lower shoulder on the inner ring with high capacity ball complement (E), a stamped steel cage centered on the balls (CB), and universal matching (Y), allowing two bearings to be paired in any arrangement without shims. The bearing is configured to accommodate combined radial and axial loads, with axial load capacity in one direction only. Typical applications include machine tool spindles, pumps, gearboxes, electric motors, and compressors where moderate to high speed operation under combined loading is required. The bearing is sourced from SKF and marked Made in USA, with date code 072U and stock code 12 visible on the original SKF box label. Specifications confirmed via SKF published catalog data include a contact angle of 40 degrees, ABEC 3 precision class as shown on the box, and an open enclosure with no integral seals or shields. The unit ships in its original SKF retail box. Cross reference numbers used in industry include 7210 BEP, 7210 BECBP, 7210 BECBM, and 7210 BECBJ for variants with different cage and matching specifications, though these are not direct substitutes for the BECBY configuration.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-189\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816998252784,"sku":"m00189","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1712.jpg?v=1771356113"},{"product_id":"skf-7210-becby-angular-contact-ball-bearing-50mm-id-x-90mm-od-x-20mm-width-new-0226-190","title":"SKF 7210 BECBY Angular Contact Ball Bearing – 50mm ID x 90mm OD x 20mm Width – New","description":"\u003cp\u003eThe SKF 7210 BECBY is a single row angular contact ball bearing with a 50 mm bore, 90 mm outside diameter, and 20 mm width. The designation indicates a 40 degree contact angle (B), a lower shoulder on the inner ring with high capacity ball complement (E), a stamped steel cage centered on the balls (CB), and universal matching (Y), allowing two bearings to be paired in any arrangement without shims. The bearing is configured to accommodate combined radial and axial loads, with axial load capacity in one direction only. Typical applications include machine tool spindles, pumps, gearboxes, electric motors, and compressors where moderate to high speed operation under combined loading is required. The bearing is sourced from SKF and marked Made in USA, with date code 072U and stock code 12 visible on the original SKF box label. Specifications confirmed via SKF published catalog data include a contact angle of 40 degrees, ABEC 3 precision class as shown on the box, and an open enclosure with no integral seals or shields. The unit ships in its original SKF retail box. Cross reference numbers used in industry include 7210 BEP, 7210 BECBP, 7210 BECBM, and 7210 BECBJ for variants with different cage and matching specifications, though these are not direct substitutes for the BECBY configuration.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-190\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48816998285552,"sku":"m00190","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1717.jpg?v=1771356098"},{"product_id":"skf-7210-becby-bearing-50mm-id-x-90mm-od-x-20mm-width-new-0226-191","title":"SKF 7210 BECBY Bearing – 50mm ID x 90mm OD x 20mm Width – New","description":"\u003cp\u003eThe SKF 7210 BECBY is a single row angular contact ball bearing with a 50 mm bore, 90 mm outside diameter, and 20 mm width. The designation indicates a 40 degree contact angle (B), a lower shoulder on the inner ring with high capacity ball complement (E), a stamped steel cage centered on the balls (CB), and universal matching (Y), allowing two bearings to be paired in any arrangement without shims. The bearing is configured to accommodate combined radial and axial loads, with axial load capacity in one direction only. Typical applications include machine tool spindles, pumps, gearboxes, electric motors, and compressors where moderate to high speed operation under combined loading is required. The bearing is sourced from SKF and marked Made in USA, with date code 072U and stock code 12 visible on the original SKF box label. Specifications confirmed via SKF published catalog data include a contact angle of 40 degrees, ABEC 3 precision class as shown on the box, and an open enclosure with no integral seals or shields. The unit ships in its original SKF retail box. Cross reference numbers used in industry include 7210 BEP, 7210 BECBP, 7210 BECBM, and 7210 BECBJ for variants with different cage and matching specifications, though these are not direct substitutes for the BECBY configuration.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-191\u003c\/p\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":48819144130800,"sku":"m00191","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1722.jpg?v=1770841690"},{"product_id":"ntn-30211-4t-30211-bearing-55mm-id-x-100mm-od-x-22-75mm-width-new-0226-192","title":"NTN 4T-30211 Bearing – 55mm ID x 100mm OD x 22.75mm Width – New","description":"\u003cp\u003eThe NTN 4T-30211 is a single row tapered roller bearing with a 55 mm bore, 100 mm outside diameter, and 22.75 mm overall width. The 4T prefix designates NTN's case carburized steel construction, engineered to deliver improved fatigue life and shock load resistance compared to standard through hardened tapered roller bearings. Internal dimensions include a cone width (B) of 21 mm and a cup width (C) of 18 mm. The bearing is supplied as a complete assembly consisting of an inner ring (cone) with roller and cage assembly, plus a separable outer ring (cup), allowing independent mounting of each component during shaft and housing assembly. Rated dynamic load capacity is 93 kN with a static load capacity of 111 kN. Limiting speed is 3,600 RPM under grease lubrication and 4,900 RPM under oil lubrication. The cage is sheet steel and tolerance class is P0\/PN2 (ABEC 1). Operating temperature range is 40 to 120 degrees C. The tapered geometry supports combined radial and axial loads in one direction and is commonly used in mirror image pairs for two direction axial load capability. Typical applications include gearboxes, wheel hubs, industrial drive shafts, pumps, conveyors, and general rotating equipment requiring high radial and thrust capacity. Box is marked with NTN part number 4T-30211[J100], catalog reference 30211, UPC 4547359003239, and date code 12\/16\/14. Supplied in original NTN factory packaging.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-192\u003c\/p\u003e","brand":"NTN","offers":[{"title":"Default Title","offer_id":48819144163568,"sku":"m00192","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1727.jpg?v=1770841633"},{"product_id":"timken-652-b-bearing-101-6mm-id-x-184-15mm-od-x-45-24mm-width-new-0226-193","title":"Timken 652-B Bearing – 101.6mm ID x 184.15mm OD x 45.24mm Width – New","description":"\u003cp\u003eThe Timken 652-B is a single flanged cup (outer ring) for an imperial tapered roller bearing, designed to pair with a matching cone assembly such as the 655, 657, 659, 661, or 663 to form a complete single row tapered roller bearing. Part of Timken's TSF design family, the flanged cup configuration facilitates axial location in housing bores and supports accurate seal alignment in through bored housings. Per Timken published catalog data, the 652-B cup has an outer diameter of 5.75 in., a flange outer diameter that extends beyond the cup body for axial registration, and a cup width of 1.5 in. The component is manufactured from Timken high alloy bearing steel with case hardened raceway surfaces for resistance to deformation under heavy radial and combined radial\/thrust loads. Operating temperature range per published specifications is 65 degrees F to 250 degrees F. The 652-B cup is commonly applied in agricultural equipment, heavy duty truck axle systems, conveyor head and tail pulleys, gear reduction units, and industrial machinery requiring flanged outer ring location. Markings visible on the carton label include the Timken brand identifier, part number 652-B, and a unit quantity of 1 EA. Item ships in original Timken packaging as pictured. Sourcing for matched assemblies, replacement cones, or set components from the 600 series tapered roller bearing line is supported by Timken's standardized inch system part numbering.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-193\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144196336,"sku":"m00193","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1732.jpg?v=1770841532"},{"product_id":"fag-22219-e1-c3-bearing-95mm-id-x-170mm-od-x-43mm-width-new-0226-194","title":"FAG 22219-E1-C3 Bearing – 95mm ID x 170mm OD x 43mm Width – New","description":"\u003cp\u003eThe FAG 22219-E1-C3 is a spherical roller bearing manufactured in Germany by Schaeffler Group under the FAG brand. It features an optimized E1 internal design for increased load capacity along with C3 radial internal clearance, which provides greater than normal internal play to accommodate thermal expansion, shaft misalignment, or interference fits encountered in heavy industrial service. The bearing measures 95 mm bore by 170 mm outside diameter by 43 mm width and is constructed with a cylindrical bore, steel cage, and double row of spherical rollers running against a common concave outer raceway. This geometry allows the bearing to compensate for static misalignment and shaft deflection while supporting high radial loads and moderate axial loads in both directions. The 22219-E1-C3 is used across a wide range of industrial applications including gearboxes, conveyors, fans, blowers, vibrating screens, pumps, paper machinery, mining equipment, crushers, and electric motor end shields. The unit is packaged in its original FAG box marked with barcode 4026677809100, batch code 0603 26\/0007C, and reference 019C00430 0030 02 020CG 111. The product label confirms one piece, MPN 22219-E1-C3, Made in Germany. The outer carton shows surface soiling and minor staining consistent with shelf storage. The bearing itself remains sealed in the original manufacturer packaging. Cross reference equivalents from other manufacturers include SKF 22219 EK C3, Timken 22219 KEJW33, and NSK 22219 EAE4 C3.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-194\u003c\/p\u003e","brand":"FAG (Schaeffler Group)","offers":[{"title":"Default Title","offer_id":48819144229104,"sku":"m00194","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00194-1.jpg?v=1775505825"},{"product_id":"timken-ll225749-bearing-127mm-id-x-165-9mm-od-x-18-26mm-width-new-0226-196","title":"Timken LL225749 Bearing – 127mm ID x 165.9mm OD x 18.26mm Width – New","description":"\u003cp\u003eThe Timken LL225749 is a single row tapered roller bearing cone (inner ring) from the LL225700 series, designed for high load, moderate speed industrial applications. This cone assembly mates with the LL225710 cup (sold separately) to form a complete single row tapered roller bearing assembly capable of supporting combined radial and axial loads on rotating shafts.\u003c\/p\u003e\n\u003cp\u003eConstruction features a high alloy steel cone with a stamped steel cage that positions the tapered rollers for true rolling motion and reduced friction. The bore measures 5.0000 in., with a cone width of 0.6875 in. (11\/16 in.). Dynamic load rating is 20,300 lb and static load rating is 34,400 lb per Timken published specifications. The bearing is rated for operating temperatures from 65 deg F to 250 deg F and built to ABMA standard 19.2 Class 2 (standard) tolerance.\u003c\/p\u003e\n\u003cp\u003eCommon applications include Porsche 934 midboard floater hubs, Hitachi EX60 and EX90 series excavator components, heavy duty off road axle systems, agricultural drivetrains, mining equipment, conveyor systems, and other industrial machinery where radial and thrust loads must be managed in a compact envelope. The LL225749 part number is the OEM market recognized identifier for this cone, manufactured by The Timken Company, Canton, Ohio. UPC 0053893111773. Item ships in original Timken branded box as pictured.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-196\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144261872,"sku":"m00196","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00196-1.jpg?v=1775505826"},{"product_id":"timken-855-bearing-88-9mm-id-x-57-53mm-width-cone-only-inner-ring-0226-197","title":"Timken 855 Bearing – 88.9mm ID x 57.53mm Width – Cone Only (Inner Ring)","description":"\u003cp\u003eThe Timken 855 is a single row tapered roller bearing cone (inner ring assembly) from the Timken 800 series. Cataloged by Timken with a 3.5 in. straight bore, a 2.265 in. cone width, and a maximum shaft fillet radius of 0.310 in., the 855 is the inner race assembly designed to pair with a matching cup (outer ring) to form a complete TS type single row tapered roller bearing. The cone includes the cage and roller set. Per Timken published data, the 855 cone carries a dynamic radial rating of 103,000 lb and a static radial rating of 142,000 lb. Standard mating cup options include the 854 outer ring, forming the 855\/854 assembly with outer dimensions of 88.9 x 190.5 x 57.15 mm in metric reference. Constructed of high alloy bearing steel and heat treated for wear resistance, the design accommodates combined radial and axial loads in opposing pair mounting configurations commonly used in heavy duty industrial gearboxes, axle systems, mining equipment, conveyor drives, and agricultural machinery. Markings on the original Timken packaging include the part number 855, the cone designation, and the distributor reference 9173\/8 32. The cone has standard precision class tolerance. Made in USA per original Timken packaging. Includes original Timken box as pictured.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-197\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144294640,"sku":"m00197","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00197-1.jpg?v=1775505826"},{"product_id":"timken-5521-bearing-123-03mm-id-x-32-54mm-width-new-0226-198","title":"Timken 552D Type for Title Tapered Roller Bearing Double Cup – 4.875 In. OD x 2.5 In. Cup Width – New","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe Timken 552D is a double tapered roller bearing cup designed as the outer race component for TDO (Tapered Double Outer) assemblies. It features an outer diameter of 4.875 inches and a cup width of 2.5 inches, with the dimensional data sourced from Timken published specifications. The 552D pairs with multiple Timken cone part numbers, including 552 (or 552A), 554, 555, 555S, 558, 558A, 558S, 559, and 560, allowing the assembly to be configured for a wide range of shaft diameters within a common housing bore. The double cup is constructed from Timken high alloy bearing steel and is machined to inch series tolerances. As part of a TDO assembly, the 552D is mounted with two single cones in a back to back arrangement, providing combined radial and thrust load capacity along with resistance to overturning moments. The TDO configuration permits the bearing to be installed in fixed positions or to float in the housing bore. Common applications include industrial gearboxes, axle systems, pinion supports, and other power transmission equipment requiring high radial and axial load capability. The cup carries the registered Timken trademark and is supplied in its original Timken tapered roller bearings box marked 552D. Country of origin and packaging condition are as shown in the listing photos. Sold as a standalone replacement cup component without matching cones.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-198\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144327408,"sku":"m00198","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00198-1.jpg?v=1775505827"},{"product_id":"timken-475-bearing-54-99mm-id-x-29-01mm-width-new-0226-199","title":"Timken 475 Bearing – 69.85mm ID x 114.3mm OD x 31.75mm Width – New m00199","description":"\u003cp\u003eThe Timken 475 is a single cone assembly from the 400 series of imperial tapered roller bearings, designed as the inner ring component of a separable Type TS single row tapered roller bearing. It features a 2.165 inch (55 mm) bore, a 1.142 inch (29 mm) cone width, and a 0.03 inch maximum shaft fillet radius. The cone is manufactured from high alloy steel with a stamped steel cage that spaces the tapered rollers and supports both radial and axial loads when paired with a compatible Timken cup, such as the 472 or 472X outer ring sold separately. Rated load capacities for the matched assembly include 32,200 lb dynamic and 41,900 lb static. The 475 is commonly installed in opposing pairs on a shaft and is widely used in automotive axles, transmissions, differentials, gearboxes, conveyor drives, and heavy duty equipment in mining, construction, and agriculture. Cone bore tolerances meet ABMA standard class 2 precision, with ISO 355 boundary dimensions and ISO 492 width tolerances. Sold in original Timken Tapered Roller Bearings box, manufactured in the United States. EAN 0053893038841. Assembly reference 475 20024. Compatible cups include 472, 472A, 472B, and 472X for matched single row configurations.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-199\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144360176,"sku":"m00199","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00199-1.jpg?v=1775505828"},{"product_id":"timken-475-bearing-69-85mm-id-x-114-3mm-od-x-31-75mm-width-new-0226-200","title":"Timken 475 Bearing – 69.85mm ID x 114.3mm OD x 31.75mm Width – New m00200","description":"\u003cp\u003eThe Timken 475 is a single cone assembly from the 400 series of imperial tapered roller bearings, designed as the inner ring component of a separable Type TS single row tapered roller bearing. It features a 2.165 inch (55 mm) bore, a 1.142 inch (29 mm) cone width, and a 0.03 inch maximum shaft fillet radius. The cone is manufactured from high alloy steel with a stamped steel cage that spaces the tapered rollers and supports both radial and axial loads when paired with a compatible Timken cup, such as the 472 or 472X outer ring sold separately. Rated load capacities for the matched assembly include 32,200 lb dynamic and 41,900 lb static. The 475 is commonly installed in opposing pairs on a shaft and is widely used in automotive axles, transmissions, differentials, gearboxes, conveyor drives, and heavy duty equipment in mining, construction, and agriculture. Cone bore tolerances meet ABMA standard class 2 precision, with ISO 355 boundary dimensions and ISO 492 width tolerances. Sold in original Timken Tapered Roller Bearings box, manufactured in the United States. EAN 0053893038841. Assembly reference 475 20024. Compatible cups include 472, 472A, 472B, and 472X for matched single row configurations.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-200\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144425712,"sku":"m00200","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00200-1.jpg?v=1775505828"},{"product_id":"timken-lm67048-bearing-31-75mm-id-x-59-13mm-od-x-15-88mm-width-new-0226-201","title":"Timken LM67048 Bearing – 1.2500 In. Bore x 0.6600 In. Cone Width – New","description":"\u003cp\u003eThe Timken LM67048 is a single tapered roller bearing cone designed to handle combined radial and axial loads in tapered roller bearing assemblies. As the inner ring component, this cone is engineered to mate with the LM67010 cup (commonly referenced together as Timken SET6) to form a complete tapered roller bearing. The cone includes the integrated cage and roller assembly that contacts the cup raceway at a defined angle, enabling the bearing to support thrust loads in one direction while simultaneously carrying radial loads.\u003c\/p\u003e\n\u003cp\u003eConfirmed dimensions sourced from Timken published specifications: 1.2500 in. bore (inner diameter), 0.6600 in. cone width. The LM67048 cone is part of the LM67000 series of imperial tapered roller bearings. Typical applications include automotive wheel hubs, light truck and trailer axles, agricultural equipment, industrial gearboxes, transmission countershafts, and machinery shafts where adjustable preload between opposing tapered bearings is required.\u003c\/p\u003e\n\u003cp\u003eManufactured by The Timken Company, the LM67048 carries the OEM part marking shown on the original packaging. The cone, rollers, and cage are supplied as a single non separable assembly per the standard tapered roller bearing convention. The matching cup (outer race) is sold separately under part number LM67010 when a complete bearing set is required.\u003c\/p\u003e\n\u003cp\u003eItem ships in the original Timken retail box as pictured. Branding visible on the packaging includes the Timken logo and the Tapered Roller Bearings product line designation. Part number LM67048 is printed on the box label along with the manufacturer barcode.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-201\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144491248,"sku":"m00201","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00201-1.jpg?v=1775505829"},{"product_id":"timken-25590-bearing-1-7500in-id-x-0-8125in-width-new-0226-230","title":"Timken 25590 Bearing – 1.7500in ID x 0.8125in Width – New m00230","description":"\u003cp\u003eThe Timken 25590 is a single cone (inner ring) assembly for an imperial tapered roller bearing, supplied in the original Timken branded box as pictured. Part of the 25500 series, this cone pairs with compatible cups including the 25520, 25521, 25521B, 25522, 25523, 25527, and 25528 to form a complete TS (Tapered Single) tapered roller bearing capable of supporting combined radial and axial loads.\u003c\/p\u003e\n\u003cp\u003ePer Timken published specifications, the 25590 has a cone bore (d) of 1.7960 in. and a cone width (B) of 1.0000 in. Construction is chrome steel with a stamped steel cage that separates the rollers to reduce friction and noise during operation. Operating temperature range is rated from 65 to 250 degrees F. ABMA precision rating is Class 2. UPC 053893216171.\u003c\/p\u003e\n\u003cp\u003eTapered roller bearings of this series are commonly used in wheel hubs, axle assemblies, gearboxes, differentials, pinion shafts, agricultural equipment, conveyor drives, and general industrial power transmission applications where opposing pairs are mounted to evenly distribute load across a shaft.\u003c\/p\u003e\n\u003cp\u003eBrand: Timken. Part Number: 25590. Type: Tapered Roller Bearing Cone. Series: 25500. Bore: 1.7960 in. Width: 1.0000 in. Cage: Stamped Steel. Material: Chrome Steel. Compatible Cups: 25520, 25521, 25521B, 25522, 25523, 25527, 25528. Cone only, cup sold separately.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-230\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144655088,"sku":"m00230","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00230-1.jpg?v=1775507180"},{"product_id":"timken-25590-bearing-1-7500in-id-x-0-8125in-width-new-0226-231","title":"Timken 25590 Bearing – 1.7500in ID x 0.8125in Width – New m00231","description":"\u003cp\u003eThe Timken 25590 is a single cone (inner ring) assembly for an imperial tapered roller bearing, supplied in the original Timken branded box as pictured. Part of the 25500 series, this cone pairs with compatible cups including the 25520, 25521, 25521B, 25522, 25523, 25527, and 25528 to form a complete TS (Tapered Single) tapered roller bearing capable of supporting combined radial and axial loads.\u003c\/p\u003e\n\u003cp\u003ePer Timken published specifications, the 25590 has a cone bore (d) of 1.7960 in. and a cone width (B) of 1.0000 in. Construction is chrome steel with a stamped steel cage that separates the rollers to reduce friction and noise during operation. Operating temperature range is rated from 65 to 250 degrees F. ABMA precision rating is Class 2. UPC 053893216171.\u003c\/p\u003e\n\u003cp\u003eTapered roller bearings of this series are commonly used in wheel hubs, axle assemblies, gearboxes, differentials, pinion shafts, agricultural equipment, conveyor drives, and general industrial power transmission applications where opposing pairs are mounted to evenly distribute load across a shaft.\u003c\/p\u003e\n\u003cp\u003eBrand: Timken. Part Number: 25590. Type: Tapered Roller Bearing Cone. Series: 25500. Bore: 1.7960 in. Width: 1.0000 in. Cage: Stamped Steel. Material: Chrome Steel. Compatible Cups: 25520, 25521, 25521B, 25522, 25523, 25527, 25528. Cone only, cup sold separately.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-231\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144687856,"sku":"m00231","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00231-1.jpg?v=1775507181"},{"product_id":"fag-nn3010-as-k-m-sp-bearing-50mm-id-x-80mm-od-x-23mm-width-new-0226-233","title":"FAG NN3010-AS-K-M-SP Bearing – 50mm ID x 80mm OD x 23mm Width – New","description":"\u003cp\u003eThe FAG NN3010-AS-K-M-SP is a double row super precision cylindrical roller bearing produced by Schaeffler Group in Germany. With a bore of 50 mm, outside diameter of 80 mm, and width of 23 mm, this bearing is engineered for applications requiring high radial load capacity combined with high rotational accuracy, most commonly the main spindles of machine tools, CNC lathes, milling centers, and grinding machines. The internal designation suffixes identify the construction: NN indicates a double row cylindrical roller design, AS denotes the lubrication groove and holes in the outer ring, K indicates a tapered bore with a 1:12 taper, M signifies a machined solid brass cage that is roller guided, and SP identifies the SP tolerance class for super precision applications with C1 radial internal clearance. The double row roller construction with guided cage allows high radial stiffness in a compact envelope while supporting elevated spindle speeds. The outer ring is separable from the inner ring, allowing independent mounting and simplifying assembly and disassembly during spindle service. The barcode label confirms the production batch and Schaeffler material tracking codes 0200N101\/0025016343\/016736923\/0000\/02. The box is the original FAG Super Precision Bearing factory carton, marked Made in Germany. Suitable as a direct replacement for spindle rebuilds and as a stocked spare for machine tool maintenance programs.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-233\u003c\/p\u003e","brand":"FAG (Schaeffler Group)","offers":[{"title":"Default Title","offer_id":48819144720624,"sku":"m00233","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00233-1.jpg?v=1775507182"},{"product_id":"nsk-7013ctysulp4-7013ctynsulp4-bearing-65mm-id-x-100mm-od-x-18mm-width-new-0226-234","title":"NSK 7013CTYSULP4 Bearing – 65mm ID x 100mm OD x 18mm Width – New m00234","description":"\u003cp\u003eThe NSK 7013CTYSULP4 is a super precision angular contact ball bearing from NSK's 7000 series, supplied new in the original NSK box. The part number marked on the original packaging is 7013CTYSULP4, with internal NSK identifiers 208 FH 71 and clearance reference markings d-4, D-4, C-95. Bore is 65 mm, outside diameter is 100 mm, and width is 18 mm, per NSK published specifications for the 7013C series. The bearing is a single row design with a 15 degree contact angle (C suffix), phenolic resin cage (TY designation), and universal flush ground configuration (SU), allowing it to be matched into DB, DF, or DT arrangements as required by the application. The P4 suffix designates ISO Class 4 precision tolerance, equivalent to ABEC 7. NSK cross references list 7013CTYNSULP4 and 7013CTRDULP4Y as functional replacements within the NSKHPS Super Precision product family. Typical applications include machine tool spindles, high speed CNC milling and turning centers, grinding spindles, indexing tables, and precision rotary fixtures where combined radial and axial loads must be supported at elevated rotational speeds. Open type construction permits oil or grease lubrication selected by the spindle builder. Made in Japan. Original NSK packaging shows minor shelf wear consistent with surplus storage.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-234\u003c\/p\u003e","brand":"NSK","offers":[{"title":"Default Title","offer_id":48819144753392,"sku":"m00234","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00234-1.jpg?v=1775507182"},{"product_id":"timken-bearing-lm67010-id-31-75-mm-od-59-13-mm-width-15-88-mm-new-0226-202","title":"Timken Bearing LM67010 ID 31.75 mm × OD 59.13 mm × Width 15.88 mm NEW m00202","description":"\u003cp\u003eThe Timken LM67048 is a single tapered roller bearing cone, the inner ring assembly used as one half of a separable tapered roller bearing arrangement. It pairs with compatible cups in the LM67010, LM67010B, LM67010BA, and LM67014 series to form a complete single row tapered roller bearing assembly. Designed to support combined radial and axial loads on a rotating shaft, this cone is commonly mounted in opposing pairs to evenly distribute loading across the shaft system.\u003c\/p\u003e\n\u003cp\u003eManufactured by Timken in the United States, the LM67048 features a 1.2500 in. bore and a 0.660 in. cone width. The cone is part number LM67048 in the LM67000 series and carries an ABMA Class 2 precision rating. Construction includes a stamped steel cage that evenly spaces the tapered rollers to reduce friction, vibration, and noise during operation. The open configuration allows lubrication to be applied in place, and the assembly is rated for an operating temperature range of 54 degrees C to 120 degrees C.\u003c\/p\u003e\n\u003cp\u003eTypical applications include automotive wheel bearings, transmissions, differentials, conveyor systems, agricultural equipment, construction machinery, and other industrial assemblies requiring combined load support at moderate speeds. The component arrives in original Timken retail packaging marked LM67048 with the manufacturer barcode visible on the box label.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-202\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":48819144786160,"sku":"m00202","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/m00202-1.jpg?v=1775505830"}],"url":"https:\/\/mroexchange.com\/collections\/bearings.oembed","provider":"MRO Exchange","version":"1.0","type":"link"}