{"title":"Contactors","description":"","products":[{"product_id":"klockner-moeller-3-pole-iec-magnetic-contactor-dil-4-am-0226-330","title":"Klockner Moeller 3-Pole IEC Magnetic Contactor DIL 4 AM","description":"\u003cp\u003eThis Klockner Moeller DIL 4 AM 3-pole IEC magnetic contactor is a large-frame industrial contactor rated for 160 amps open at 3-phase 600V maximum and 160 amps open at 3-pole break 250V DC maximum. The nameplate confirms HP ratings of 40 HP at 200V, 50 HP at 230V, 100 HP at 460V, and 125 HP at 575V, 3-phase. The unit carries UL and CSA listings and meets IEC 947, EN 60947, and VDE 0660 standards. AWG 6 to 2\/0 wiring is supported with a tightening torque of 10 Nm. The assembly includes a Klockner Moeller 11 SI DIL M auxiliary contact block mounted to the contactor, rated AC-15, Ith 16A, Uimp 6000V, with 1 NO and 1 NC contacts, UL and CSA listed. A Klockner Moeller Z5-100\/SK4 thermal overload relay is also attached, with an adjustable range of 70 to 100A, suitable for 10 kA RMS symmetrical at 600V AC maximum, with a maximum fuse of 400A Class J and maximum circuit breaker of 400A. The overload relay includes 1 NO and 1 NC auxiliary contacts. All three components are assembled together as a complete motor starter assembly. The DIL 4 AM is a discontinued model per the manufacturer. Visible surface wear and soiling consistent with industrial service use. Made in Germany per the auxiliary block nameplate.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-330\u003c\/p\u003e","brand":"Klockner Moeller","offers":[{"title":"Default Title","offer_id":48823155032304,"sku":"m00330","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/933F90F5-A404-4234-B143-2FD188119367.jpg?v=1770914151"},{"product_id":"allen-bradley-contactor-with-overload-relay-100-a60n3-with-193-a1k3-600-vac-max-0326-337","title":"Allen-Bradley Contactor with Overload Relay 100-A60N*3 with 193-A1K3 600 VAC MAX","description":"\u003cp\u003eUsed in industrial motor control applications, this Allen-Bradley Bulletin 100-A Series assembly combines a 100-A60N*3 three-pole IEC magnetic contactor with a 193-A1K3 overload relay. The contactor carries CAT number 100-A60N*3, Series C, rated at 60A maximum AC3 current and 600 VAC maximum continuous. IEC 947, BS 5424, and VDE 0660 standards apply, with an insulation voltage Ui of 690V and a conventional thermal current Ith of 100A. AC3 kW ratings are 15 kW at 220\/230V, 30 kW at 380\/400\/415V, and 37 kW at 500V and 660\/690V. Maximum horsepower ratings include 15 HP at 200V three-phase, 20 HP at 230V, 40 HP at 460V, and 50 HP at 575V. Single-phase ratings are 5 HP at 115V and 10 HP at 230V. The 193-A1K3 overload relay is Series A with a current range of 23 to 75A and Trip Class 10. A surge suppressor accessory and an auxiliary contact block are also mounted to the assembly. The unit is Made in U.S.A. per the nameplate. Applicable to pump, compressor, conveyor, and general industrial motor starting circuits requiring IEC-rated magnetic contactor protection.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-337\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":48824020402416,"sku":"m00337","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/BCBB26AB-5DF0-4FD7-B0A5-89D36BACE5A5.jpg?v=1770930289"},{"product_id":"allen-bradley-motor-starter-509-bod-0226-339","title":"Allen-Bradley Motor Starter 509-BOD","description":"\u003cp\u003eUsed in motor control centers and standalone motor control applications, the Allen-Bradley 509-BOD is a NEMA Size 1 full voltage non-reversing motor starter rated at 27 amps continuous, 600VAC maximum. The catalog number 509-BOD designates an open-type, non-combination unit without enclosure, designed for 3-phase, 3 to 5 pole applications. This example is Series B and is equipped with a eutectic alloy overload relay and a CB236 coil rated at 115-120V at 60Hz and 110V at 50Hz. A 595-A auxiliary contact block is visible mounted to the side of the starter body. Output terminals are labeled T1, T2, and T3; input terminals are labeled L1, L2, and L3. Maximum ratings for 3-phase operation are 7.5 HP at 200V or 230V and 10 HP at 460 to 575V. The unit includes a manual reset button and a TRIPPED indicator on the overload relay assembly. Assembled in Mexico per the nameplate. The 509-BOD is part of Allen-Bradley's Bulletin 509 line of NEMA full voltage starters and is compatible with standard MCC bucket configurations for Size 0 through Size 5.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-339\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":48824045994224,"sku":"m00339","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/88825890-3B92-42A2-B8CB-C46B1B99A3AC.jpg?v=1770930551"},{"product_id":"allen-bradley-contactor-500-to-930-600-vac-max-0226-431","title":"Allen-Bradley Contactor 500-TO*930 600 VAC MAX m00431","description":"\u003cp\u003eAllen-Bradley 500-TO930 is a NEMA Size 00 motor starter auxiliary contact block rated for industrial control applications. The nameplate identifies Cat 500-TO930, Series 1, with a maximum continuous voltage of 600 VAC and AC-1 rating of 32 A at 690 V. The auxiliary contact is rated 20 A with NEMA A600 classification. Short circuit rating is 5 kA at 600 V when protected by fuses and 5 kA at 480 V when protected by a circuit breaker. IEC\/EN 60947-4-1 \/ -5-1 compliant with AC-3 ratings up to 5.5 kW depending on voltage (230–690 V). Terminal wire capacity supports up to #10 AWG copper conductors, 75°C, with specified torque range 13.3–17.7 lb-in. Marked cULus Listed and CE, with impulse withstand voltage (Uimp) 6 kV. Manufactured in Switzerland. Suitable for integration in motor control assemblies requiring NEMA Size 00 contactor components.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-431\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":48835826450672,"sku":"m00431","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/9C1E092F-1B42-456E-9BE4-70B4DC488211.jpg?v=1771351336"},{"product_id":"ls-electric-lsis-magnetic-contactor-mc-400a-0226-641","title":"LS Electric (LSIS) Magnetic Contactor MC-400a","description":"\u003cp\u003eThe LS Electric Metasol MC-400a is a 3-pole IEC magnetic contactor rated at 400A, designed for general-purpose motor control and resistive load switching applications. The unit carries OEM part number MC400A-30-22-FV-B-E and manufacturer SKU 1371000200, as printed on the original factory box label. Coil voltage is AC 100-240V at 50\/60Hz or DC 100-220V, accommodating a wide range of control circuit voltages. Auxiliary contact configuration is 2a2b (2 NO, 2 NC), as labeled on the carton. The contactor is manufactured in Korea by LSIS and bears CE and cULus markings visible on the box label. Net weight is listed as 9.9 kg on the manufacturer label. Published specifications for this model include a 400AF frame rating, rated insulation voltage of 1,000V, rated impulse voltage of 8kV, and a short circuit withstand current of 4,600A at one second. Power terminals feature heavy-duty flat lug hardware for bolted bus bar or cable connections. The unit is still in its original OEM cardboard carton with foam packaging and was manufactured on August 13, 2014, as indicated on the carton label. Compatible accessories including auxiliary contact blocks and surge suppressors can be side or front mounted. The MC-400a belongs to the Metasol MC series, which spans 25 models across 9 frame sizes.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-641\u003c\/p\u003e","brand":"LS Electric (LSIS)","offers":[{"title":"Default Title","offer_id":48890722582768,"sku":"m00641","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/ED349940-FACC-4E8A-834F-C94471576313.jpg?v=1771952790"},{"product_id":"sprecher-schuh-contactor-ca6-210-ei-0226-649","title":"Sprecher + Schuh Contactor CA6-210-EI","description":"\u003cp\u003eUsed in medium to heavy industrial motor control applications, the Sprecher + Schuh CA6-210-EI is a three-pole, non-reversing IEC contactor rated for 210A continuous at AC-1 up to 1000V and 350A AC-1. The nameplate confirms 600 VAC max per UL\/CSA requirements, with an AC-3 power rating of 67 kW at 230V, 70 kW at 240V, 118 kW at 400V, 132 kW at 415V, 150 kW at 500V, and 110 kW at 1000V. UL-listed for industrial continuous duty (EQ. 728B) and CE marked per IEC 60947-4-1 and EN 60947-4-1. The unit carries an impulse withstand voltage of 12 kV. HP ratings per the nameplate include 50 HP at 230V single phase and up to 200 HP at 575V three phase. The installed coil is the CRC6-210 electronic coil assembly rated 110V 50Hz and 127V 60Hz, which corresponds to the -11 series coil code. The electronic coil design reduces inrush current and permits direct interface with PLC output modules. Terminal connections require lugs from the HG420 series, torqued to 130-150 lb-in, or CA6-L420 lug kits at 375 lb-in for conductors from 2\/0 through 600 MCM. The unit requires 75 degree C copper wire only. Max fuse rating is 500A; max circuit breaker rating is 300A. Series CA6 is a discontinued product line, now replaced by the CA9 series. The unit was manufactured in Switzerland and assembled in the Czech Republic per coil label markings. The contactor body shows three line-side terminals (1L1, 3L2, 5L3) and three load-side terminals (2T1, 4T2, 6T3) with large bus bar-style copper termination hardware visible on both line and load sides.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-649\u003c\/p\u003e","brand":"Sprecher + Schuh","offers":[{"title":"Default Title","offer_id":48890914111728,"sku":"m00649","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/1390F5E4-72F0-4C67-8680-EA243E353793.jpg?v=1771955023"},{"product_id":"telemecanique-schneider-electric-motor-starter-contactor-assembly-lc1d80-lx1d6l6-la1dn-lr2-d3357-0226-669","title":"Telemecanique (Schneider Electric) Motor Starter Contactor Assembly LC1D80 \/ LX1D6L6 \/ LA1DN \/ LR2 D3357","description":"\u003cp\u003eRated at 80A continuous current with a 208V 60Hz coil, this Telemecanique LC1D80 motor starter assembly is a complete three-phase contactor unit ready for direct installation. The assembly includes the LC1D80 main contactor body, an LX1D6L6 coil module rated 208V 60Hz, an LA1DN auxiliary contact block providing two normally open auxiliary contacts (terminals 153\/154 and 163\/164), and a Telemecanique LR2 D3357 thermal overload relay rated 37–50A. All four components are physically assembled and interconnected as shown. The contactor body carries the Telemecanique name and is rated for use on circuits up to 1000V IEC 947, with a UL listing of 170M Ind. Cont. Eq. at 600V AC max. Three-phase AC3 power ratings are 15kW at 220V, 22kW at 380V, 25kW at 415V, 30kW at 480V, and 33kW at 660V. US horsepower ratings per nameplate: 7.5 HP at 230V single phase, 15 HP at 200–230V three phase, and 40 HP at 460–575V three phase. The LR2 D3357 overload relay mounts directly to the contactor and is rated for Class 10A operation with a maximum fuse of 200A, AWG 10-0 CU wiring, and 75 lb. in. torque. It features a push-to-reset manual reset function. The overload relay is rated for use with LC1 D and LP1 D contactors only, per nameplate. The coil module and auxiliary block are both securely attached. All components are manufactured in France.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-669\u003c\/p\u003e","brand":"Telemecanique (Schneider Electric)","offers":[{"title":"Default Title","offer_id":48891240055024,"sku":"m00669","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/22D38F43-888B-40C9-8B6F-C74F5880A188.jpg?v=1771961196"},{"product_id":"telemecanique-schneider-electric-contactor-lc1d5011-600v-ac-max-0226-678","title":"Telemecanique (Schneider Electric) Contactor LC1D5011 600V AC max","description":"\u003cp\u003eRated for use in circuits up to 600V AC maximum, this Telemecanique LC1D5011 is a 3-pole IEC magnetic contactor manufactured in France. The nameplate identifies it as a TeSys D series unit with a thermal current rating of 80A (Ith) and an impulse voltage rating of 8kV. For 3-phase AC3 motor duty, the unit is rated at 15kW at 220V, 22kW at 380V, 25kW at 415V, 30kW at 480V, and 33kW at 660V. The UL listing is 170M at 600V AC, and the unit carries CSA approval as well as CE, VDE, BS, and NFC certifications. JEM rating is AC3.1.0-0, rated at 11kW at 200 to 220V and 22kW at 440V. Single-phase HP ratings are 7.5HP at 230V; three-phase ratings are 15HP at 200 to 230V and 40HP at 460 to 575V. Continuous current is 70A, wire range is AWG 3 to 10 copper at 75°C, and terminal torque is 35 lb.in. Auxiliary contacts are rated A600 and P600. The unit carries the registration number 04447740171 and is listed under IEC 947, IEC 158-1, NF C 63110, VDE 0660, and BS 5424 standards. Coil voltage is not confirmed from visible markings in available photos.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-678\u003c\/p\u003e","brand":"Telemecanique (Schneider Electric)","offers":[{"title":"Default Title","offer_id":48891379351792,"sku":"m00678","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/83BE77CC-F6B1-4901-B292-7E5A4220994F.jpg?v=1771964011"},{"product_id":"siemens-contactor-3tf5222-0ak6-0226-707","title":"Siemens Contactor 3TF5222-0AK6","description":"\u003cp\u003eUsed in industrial motor control applications, the Siemens 3TF5222-0AK6 is a 3-pole IEC-rated AC magnetic contactor from the Siemens 3TF52 World Series. It carries a main contact rating of 170 amps at 600V AC and is suitable for AC-3 duty cycle applications. The operating coil is rated at 120V AC at 60Hz and 110V AC at 50Hz. The unit includes 2 normally open and 2 normally closed auxiliary contacts, as confirmed by the visible 3TF5222-0AK6 label on the nameplate. Per published Siemens specifications, the contactor is rated for 65 HP at 230V, 125 HP at 460V, and 150 HP at 575V in three-phase service. Main power terminals are labeled L1, L2, L3 (input) and T1, T2, T3 (output). The unit features DIN rail compatible mounting feet and heavy cast housing construction consistent with the 3TF52 frame size. An auxiliary contact block is visibly attached to the side of the assembly. The coil sub-module shown in the photos carries the label 3TX7522-3S, consistent with the 110\/120V AC coil configuration for this frame. Manufactured in Germany, serial code G\/9528T16 is visible on the product label. This item is a discontinued part number per Siemens and is no longer available through standard OEM distribution channels.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-707\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":48898431910128,"sku":"m00707","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/64598855-0753-48CC-AA91-1FE50A017E7A.jpg?v=1772057950"},{"product_id":"fuji-electric-reversing-magnetic-contactor-starter-assembly-sc-e4-se80aa-100-120v-ac-coil-0226-708","title":"Fuji Electric Reversing Magnetic Contactor Starter Assembly SC-E4 SE80AA 100-120V AC coil","description":"\u003cp\u003eUsed in industrial motor control panels requiring forward and reverse motor operation, this Fuji Electric SC-E4 SE80AA reversing magnetic contactor starter assembly is built around two SC-E4 frame-size IEC contactors rated 80A AC-3 at 440V and 105A AC-1. The SE80AA designation indicates the 67mm frame size. The assembly includes a Fuji Electric SZ-RM mechanical interlock unit, which prevents both contactors from being energized simultaneously, along with two SZ-Z34 coil surge suppressor blocks rated 24-48V AC and one SZ-AS1\/T auxiliary contact block. Motor overload protection is provided by a Fuji Electric TK-E3 TK80E thermal overload relay with an adjustable range of 48-68A, rated for direct mounting to SC-E3 and SC-E4 frame contactors. The overload relay includes push-to-test and reset functions, a trip indicator, and auto and manual reset modes. The main contactors carry IEC 60947, EN 60947, VDE 0660, JIS C 8201, and UL\/CSA ratings. Bus bar-style load terminals with bolt-hole lugs are visible on the output side of the overload relay. The assembly is labeled FWD and REV on the forward and reverse contactors respectively. Made in Japan.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-708\u003c\/p\u003e","brand":"Fuji Electric","offers":[{"title":"Default Title","offer_id":48898434433264,"sku":"m00708","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/4050D344-243F-408E-9F52-E775A59EF4CB.jpg?v=1772058116"},{"product_id":"sprecher-schuh-contactor-ca7-60-00-0226-711","title":"Sprecher + Schuh Contactor CA7-60-00","description":"\u003cp\u003eThe Sprecher + Schuh CA7-60-00 is a 3-pole, non-reversing IEC motor contactor from the Series CA7 line, manufactured in Switzerland. The nameplate confirms an AC-1 rating of 690V at 100A and a 600V AC max rating of 90A enclosed per UL listing. Under AC-3 duty, the unit is rated 18.5 kW at 230V and 240V, and 30 kW at 400V, 415V, 500V, and 690V. For North American applications, UL\/CSA horsepower ratings are listed as 5 HP single-phase at 115V, 15 HP three-phase at 200V, 20 HP three-phase at 230V, 40 HP three-phase at 460V, and 50 HP three-phase at 575V. Short circuit rating is 5 kA at 600V. The unit complies with EN 60947 and IEC 60947 standards and carries the CE, UL, and CSA marks. The installed coil module is marked 208V 60Hz; CA7 series coils are field-replaceable plug-in modules, allowing reconfiguration for other voltages. The CA7-60-00 designation indicates 0 normally open and 0 normally closed auxiliary contacts integral to the base contactor. Three main power poles are labeled L1, L2, L3 on the line side and T1, T2, T3 on the load side. The contactor is compatible with the full range of CA7 series accessory blocks and with CEP7 series overload relays for direct assembly.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-711\u003c\/p\u003e","brand":"Sprecher + Schuh","offers":[{"title":"Default Title","offer_id":48916617593072,"sku":"m00711","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/294B266D-DF8C-4007-B706-6CD67A8A4E3B.jpg?v=1772115239"},{"product_id":"ward-leonard-electric-co-inc-definite-purpose-contactor-5dp2-5051-11-500v-dc-0226-723","title":"Ward Leonard Electric Co., Inc. Definite Purpose Contactor 5DP2-5051-11 500V DC","description":"\u003cp\u003eUsed in DC motor control and drive circuits, the Ward Leonard 5DP2-5051-11 is a 3-pole definite purpose contactor rated at 56 amperes and 500V DC. Manufactured by Ward Leonard Electric Co., Inc. of Mount Vernon, New York, this contactor belongs to the 5DP series, which was widely deployed in industrial applications requiring reliable DC switching. The nameplate identifies it under Cat. No. 5DP2-5051-11 with a definite purpose rating designation. A coil assembly is visible on the unit, labeled by Ward Leonard and rated for AC pilot duty at 300 VA. The coil voltage range, partially visible on the orange coil tag, reads 25 to 500V AC and 0 to 125V DC. Three load terminals labeled T1, T2, and T3 are accessible from the load side, with corresponding line-side terminals visible on the opposite face. The contactor features a cast iron housing with orange coil brackets and an integrated mounting base for panel or enclosure installation. Serial number 23082.719 is visible on the front face. Ward Leonard contactors of this series have historically been used in crane, hoist, elevator, and machine tool DC drive applications. The MPN 5DP2-5051-11 is consistent with the 5DP2 frame designation for the 56-ampere, 3-pole, 500VDC definite purpose class.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-723\u003c\/p\u003e","brand":"Ward Leonard Electric Co., Inc.","offers":[{"title":"Default Title","offer_id":48916636598512,"sku":"m00723","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/5BB5186C-5FE7-410F-A60C-2CD2262C0BB1.jpg?v=1772117016"},{"product_id":"yaskawa-electric-magnetic-contactor-hv-75ap2-600v-max-0226-725","title":"Yaskawa Electric Magnetic Contactor HV-75AP2 600V MAX","description":"\u003cp\u003eUsed in motor control and automation systems throughout industrial machine tool and CNC environments, the Yaskawa HV-75AP2 is a 2-pole magnetic contactor rated at 75 amperes and 600V maximum. The nameplate identifies the model as HV-75AP2 with a thermal current rating of Ith = 75A. This contactor belongs to the Yaskawa HV-75AP series, which was widely specified for use with Yaskawa YASNAC and VS series drive systems, including the VS-616 and VS-626 inverter families. The contact arrangement label indicates auxiliary contacts at terminals 13(+)\/14(-) and 17\/18, with additional contacts at terminals 15\/16, 21\/22, 23, and 24. Per the nameplate notation, terminals 21, 22, 23, and 24 are used for internal circuit functions; terminals 15 and 16 are designated for external signal use. Main power terminals are accessible on both faces of the housing, with six screw-type load terminals visible. The unit carries document reference N1978-1 and is marked M8 on the housing. The contactor is mounted on an integrated foot-mount base with two bolt-down slots. A PQ Controls service label is affixed to the side of the housing. The MPN HV-75AP2 is confirmed on the nameplate label, manufactured by Yaskawa Electric, Japan.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-725\u003c\/p\u003e","brand":"Yaskawa Electric","offers":[{"title":"Default Title","offer_id":48916637188336,"sku":"m00725","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/AC015331-CA9F-4DB6-9ABB-8AB938ABFAF1.jpg?v=1772117130"},{"product_id":"siemens-solid-state-contactor-3rf2310-2aa06-0326-1039","title":"Siemens Solid State Contactor 3RF2310-2AA06","description":"\u003cp\u003eUsed in industrial control panels, packaging machinery, and heating system automation, the Siemens SIRIUS 3RF2310-2AA06 is a 1-phase solid-state contactor rated AC51 10A at 40 degrees C with a load voltage range of 48-600V AC and a 24V DC control voltage. Unlike mechanical contactors, this device uses semiconductor switching technology for wear-free, silent operation, making it well suited for high-cycle applications such as resistive heating or solenoid valve control. The spring-type terminal connection differentiates the 2AA06 configuration from screw-terminal variants in the 3RF2310 family. Nameplate data confirms IEC\/EN 60947-4-3, IP20 enclosure rating, a maximum operational current (Imax) of 10A at both 230V and 400V, and an i2t rating of 800 A2s. Additional nameplate data shows power ratings of 2.3 kW at 230V and 4 kW at 400V in the motor switching column. Surrounding air temperature ambient limit is 40 degrees C, with a UL-listed industrial control equipment rating (IND. CONT. EQ. 165C) confirmed on the nameplate. The unit carries CE and EAC marks and is manufactured by Siemens AG in Germany. DIN rail mounting allows direct integration into standard control cabinets. Item is presented in original manufacturer retail packaging with multilingual instruction booklet included.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1039\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":48975686566128,"sku":"m01039","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/421DD943-FCA0-43FB-8A8C-9F730F15C2FC.jpg?v=1773258899"},{"product_id":"siemens-power-contactor-3rt2017-2bb41-0326-1041","title":"Siemens Power Contactor 3RT2017-2BB41 m01041","description":"\u003cp\u003eThe Siemens 3RT2017-2BB41 is a 3-pole IEC power contactor from the SIRIUS 3RT2 series, rated for AC-3 duty at 12A and 5.5 kW at 400V. The control coil operates on 24V DC, making it compatible with standard PLC output modules and DC control circuits. Load-side ratings extend to 600V AC, with published HP ratings of 3 HP at 230V, 7.5 HP at 460V, and 10 HP at 575V per the UL\/CSA nameplate. The contactor includes one integrated 1NO auxiliary contact and uses spring-type terminal connections for toolless wire termination. Terminal wire acceptance ranges from AWG 20 to AWG 12. Short-circuit rating is 5 kA at 600V, with a maximum RK5 fuse of 45A and maximum circuit breaker of 50A. The unit is size S00 and mounts on standard DIN rail or surface. Certifications confirmed visible on the nameplate include UL Listed (IND. CONT. EQ., Listed 165 C), CSA (B44.1\/ASME A17.5 Elevator Use), CE, EAC, CCC, and IEC\/EN\/K 60947-4-1. Manufactured in Germany. Serial number 1P3RT2017-2BB41+SG\/160922962713. Production lot G\/160922, revision E06. The 3RT2017-2BB41 replaces the earlier 3RT1017-2BB41 and is compatible with 3RT series snap-on auxiliary switch blocks and suppressor accessories.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1041\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":48975733653744,"sku":"m01041","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/59B93102-0977-4561-8D38-926D8F25E167.jpg?v=1773259761"},{"product_id":"siemens-power-contactor-3rt2016-2bb42-0326-1042","title":"Siemens Power Contactor 3RT2016-2BB42 m01042","description":"\u003cp\u003eThe Siemens 3RT2016-2BB42 is a SIRIUS 3RT2 series 3-pole power contactor rated for AC-3 duty at 9A and 400V, with a 24V DC control coil. Manufactured in Germany by Siemens AG, DE-92220 Amberg, this contactor carries IEC\/EN\/DIN EN 60947-4-1 certification and is also UL listed (E165C) per the nameplate label, making it suitable for both IEC and North American applications. The S00 frame size is compact and designed for DIN rail or panel mounting. Main contact configuration is 3NO for the power poles with 1NC auxiliary contact (21NC\/22NC terminals confirmed on nameplate). The coil is rated DC 24V, confirmed on both the box label and the device face. AC-3 current rating is 9A at 400V, corresponding to 4kW motor load capacity at 400V. AC-15 rating is confirmed at 10A per the device nameplate. Short circuit protection requirement is max CB 50A, max fuse 45A per UL nameplate. Wire range is 0.5 to 4 mm² (20 to 12 AWG). Part number 3RT2016-2BB42 is confirmed on both the original factory carton and the device body. Date code G\/200507 indicates manufacture in May 2007. Varistor suppression module port is present for optional accessory fitment. Compatible with Siemens 3RH and 3RT accessory modules.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1042\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":48975753380080,"sku":"m01042","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/ADF5DAFA-2043-44A7-B276-3DF1D96B6A74.jpg?v=1773260017"},{"product_id":"siemens-power-contactor-3rt2017-2bb41-0326-1121","title":"Siemens Power Contactor 3RT2017-2BB41","description":"\u003cp\u003eA power contactor from Siemens belonging to the SIRIUS 3RT2 series, the 3RT2017-2BB41 is a compact 3-pole device rated for AC-3 duty at 12A and 5.5 kW at 400V. The control coil operates on 24V DC, and the main circuit is rated to 600V AC per UL and CSA standards. The unit includes one integrated normally open (1NO) auxiliary contact and uses spring-type terminal connections throughout, eliminating the need for screw tightening tools during wiring. It is size S00, the smallest frame in the 3RT2 family, measuring approximately 45 x 70 x 73 mm, and mounts on standard DIN rail or surface. The nameplate confirms compliance with CSA B44.1 and ASME A17.5 for elevator use, and the UL mark is visible. Short circuit rating is 5 kA at 600V with a maximum RK5 fuse of 45A and maximum circuit breaker of 50A. Wiring is specified for 75 degrees C copper conductors only. The part number 3RT2017-2BB41 replaces the prior generation 3RT1017-2BB41. Manufactured by Siemens AG in Germany. The serial reference on the nameplate reads 1P3RT2017-2BB41+SG\/160922962698, and the housing carries the date code G\/160922 with revision E06.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1121\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":49000577171696,"sku":"m01121","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/68FB828B-C14E-4C50-8FDF-EA746647514A.jpg?v=1773762367"},{"product_id":"siemens-power-contactor-3rt2016-2bb42-0326-1122","title":"Siemens Power Contactor 3RT2016-2BB42","description":"\u003cp\u003eA 3-pole power contactor from Siemens, part of the SIRIUS 3RT2 product family. Part number 3RT2016-2BB42 identifies this as a Size S00 unit with a 24V DC control coil, rated at 9A AC-3 current and 4 kW motor load capacity at 400V AC. The integrated auxiliary contact configuration is 1NC (normally closed), as confirmed on the device nameplate and original packaging. Terminal designations 1\/L1, 3\/L2, 5\/L3 (line) and 2\/T1, 4\/T2, 6\/T3 (load) are molded into the housing, along with 21NC and 22NC for the auxiliary circuit. The coil terminals are marked A1 and A2. Rated insulation voltage is 690V; rated impulse voltage is 6 kV. Conforms to IEC\/EN\/K 60947-4-1 and GB\/T14048.4 standards. The unit also carries CE, CCC, EAC, and JEM AC3.1.0-0 markings, visible on the rear label. Wire termination accommodates conductors from 0.5 to 4 mm2 (spring-type terminals), AWG 20-12 range. Mounting is via DIN rail or surface mount. Manufactured by Siemens AG, DE-92220 Amberg, Germany. Compatible suppressor module referenced on the rear label is part number 3RA2908-1A. Internal lot reference CON0527 is preserved for traceability.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1122\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":49000578973936,"sku":"m01122","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/4A2BEC98-20D2-4F6E-97E8-A4FC5325550B.jpg?v=1773762393"},{"product_id":"abb-dc-drive-contactor-ehdb110-0226-702","title":"ABB DC Drive Contactor EHDB110","description":"\u003cp\u003eUsed in solid state DC adjustable speed drive systems, the ABB Spectrum EHDB110 is a 3-pole DC drive contactor rated for 110A continuous current at 600 VDC. The unit carries the ABB Spectrum \"Drive Contactor\" designation and is designed for applications where the contactor is not required to make or break the load under normal operating conditions. The coil is rated at 110V AC at 50Hz and 120V AC at 60Hz, as confirmed by the visible nameplate. Terminal markings visible on the unit include poles 1 through 4 on the main contacts, with 5(+) and 6(-) designations consistent with the EHDB series polarity-dependent NC contact configuration used for dynamic braking circuits. An auxiliary contact block is mounted to the unit, marked CAL 16-11A, rated 600V AC and 10A per the visible label. The full catalog reference visible on the back label reads EHDB 110C. UL and CSA listings are confirmed by visible marks on the nameplate. ABB positions the Spectrum EHDB series as a purpose-built solution for solid state DC drive environments, where standard AC contactors are not suitable due to DC arc interruption requirements.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-702\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":49492380319984,"sku":"m00702","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/0C51B1C8-9E0A-42E7-9B9A-45FA23A935E5.jpg?v=1772057560"},{"product_id":"abb-drive-contactor-ehdb-280-0226-710","title":"ABB Drive Contactor EHDB-280","description":"\u003cp\u003eUsed in solid state DC adjustable speed drive systems, the ABB Spectrum EHDB-280 is a 3-pole drive contactor rated at 600 V DC with a continuous current rating of 280 A. Manufactured by ABB Control and part of the Spectrum series, this contactor carries the catalog designation EHDB 280C and is specifically engineered for applications where the contactor is not required to make or break the load under normal operating conditions. The normally closed contact is configured for dynamic braking duty. Terminal markings 1, 2, 3, 4 on the main poles and 5(+) and 6(-) on the DC bus side are visible on the nameplate. A CAL16-11A auxiliary contact block is mounted on the unit, providing 1 NO and 1 NC auxiliary contacts. The coil voltage code visible on the base label references the EHDB 280C series with an \"L\" suffix, indicating a lug-less terminal configuration. The contactor is CE marked and carries UL and CSA listings as shown on the nameplate. Terminal lug hardware is present and the unit includes lead wires attached to the coil terminals. ABB Control manufactured this unit at facilities in Wichita Falls, Texas and St. Laurent, Quebec.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-710\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":49492380352752,"sku":"m00710","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/1CAC0752-9870-4C8F-AE67-93E8A0D058BB.jpg?v=1772115182"},{"product_id":"abb-ehdb130c-1l-spectrum-solid-state-drive-contactor","title":"ABB EHDB130C-1L Spectrum Solid State Drive Contactor","description":"\u003cp\u003eABB EHDB130C-1L Spectrum solid state drive contactor rated 600 VDC and 130A continuous. This unit is marked SK 824 085-AF and manufactured by ABB Control, Made in Sweden. The nameplate specifies “Solid State Drive Ratings Only” with a maximum rating of 600 VDC and 130A continuous current. Coil control voltage is 110V 50Hz or 120V 60Hz via terminals A1 and A2 as labeled. The assembly features heavy-duty power terminals with numbered connection points and bus bar style lugs for high current DC applications.\u003c\/p\u003e\n\u003cp\u003eThe EHDB 130 series is designed for use in DC drive systems where controlled connection and disconnection of high voltage DC circuits is required. Front labeling includes terminal designations 1, 2, 3, 4, 5(+), and 6(-), along with CE marking and RU recognition. Catalog number EHDB130C-1L and reference SK 824 085-AF are clearly printed on the unit and packaging.\u003c\/p\u003e\n\u003cp\u003eSuitable for industrial automation panels, DC motor drive systems, and OEM equipment utilizing 600 VDC drive circuits within the stated ratings. All specifications are derived directly from the manufacturer nameplate and labeling on the device.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-318\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":49494490644720,"sku":"m00318","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/15712CD3-FADD-4EAE-B456-6919B75EC295.jpg?v=1775241680"},{"product_id":"abb-solid-state-drive-contactor-ehdb-360-amp","title":"ABB Solid State Drive Contactor EHDB 360 Amp","description":"\u003cp\u003eThe ABB EHDB 360 is a solid state Spectrum series drive contactor rated for 360 amperes continuous at 600 volts DC. The unit is designed specifically for solid state drive applications and carries UL and CSA listings as confirmed by the nameplate markings. The contactor is a 2-pole configuration with load terminals labeled 1, 2, 3, 4 and DC bus terminals labeled 5(+) and 6(-). The coil assembly is catalog number SK 826 400-AF, rated for 110V at 50Hz and 120V at 60Hz, with coil terminals A1 and A2 visible on the coil module. The contactor body is labeled SK 826 485 and carries CE marking. The unit is manufactured in Sweden. ABB Spectrum drive contactors are used in DC drive systems, regenerative drives, and DC motor control applications requiring reliable high-current switching with solid state drive-rated contacts. The EHDB series is among the most recognized and widely installed drive contactors in the North American industrial market, commonly found in steel mills, paper mills, mining operations, and other heavy industrial DC drive installations. The unit shows signs of prior service use consistent with its removed-from-service condition. Coil voltage is compatible with standard 120V North American control circuits.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-328\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":49494491332848,"sku":"m00328","price":1349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/328.webp?v=1775158913"},{"product_id":"allen-bradley-iec-magnetic-contactor-100-a60n-3-series-c","title":"Allen-Bradley IEC Magnetic Contactor 100-A60N*3 Series C","description":"\u003cp\u003eThis Allen-Bradley 100-A60N*3 Series C IEC magnetic contactor is a 3-pole, 60-amp unit rated for 600 VAC maximum continuous operation. The nameplate confirms AC3 ratings of 15 kW at 220\/230V, 30 kW at 380\/400\/415V, and 37 kW at both 500V and 660\/690V. The insulation voltage (Ui) is 690V and the thermal current (Ith) is 100A. AC1 current rating is 100A. Maximum HP ratings per nameplate include 40 HP at 460V three-phase and 50 HP at 575V three-phase. Power terminal torque is specified at 35 lb-in and wire is rated for 60\/75 degrees C copper only. The unit carries UL and CSA listings and meets IEC 947, BS 5424, and VDE 0660 standards. An installed coil module marked 208V 60Hz is present. An Allen-Bradley overload relay assembly is attached to the bottom of the contactor; full overload model number is not fully legible from available photos. The contactor body shows visible use wear and surface soiling consistent with industrial service. Made in U.S.A. per nameplate.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-329\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49494491496688,"sku":"m00329","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/329.webp?v=1775158917"},{"product_id":"klockner-moeller-three-pole-contactor-dil4am-11-si-dil-m-auxiliary-contact-block","title":"Klockner Moeller Three-Pole Contactor DIL4AM 11 SI DIL M Auxiliary Contact Block","description":"\u003cp\u003eThis listing is for a Klockner Moeller DIL 4 AM three-pole contactor with an 11 SI DIL M auxiliary contact block mounted to the side. The contactor nameplate confirms a 3-phase rating for 200\/230V AC and 460\/575V AC coil voltages, AC-3 current rating of 18A, AC-1 rating of 30A, 600V AC and 300V DC maximum voltage, and a 10,000 RMS symmetrical amps interrupting capacity. The unit is UL and CSA listed and carries a date code of 0499. The auxiliary contact block is rated per IEC 947 and VDE 0660, with coil voltages of 220V to 415\/240V AC at 2.5A to 16A AC-15, impulse withstand voltage of 6000V, and provides 1 NO and 1 NC auxiliary contact. Tightening torque is specified at 1.2 Nm. The auxiliary block is manufactured in Germany. This assembly is suited for use as a replacement in compatible motor control, machine tool, and industrial automation panel applications. Compatibility should be verified prior to installation. Unit is offered as removed and has not been tested or recertified.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-350\u003c\/p\u003e","brand":"Klockner Moeller","offers":[{"title":"Default Title","offer_id":49494491889904,"sku":"m00350","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/350.webp?v=1775159619"},{"product_id":"allen-bradley-contactor-500-to-930-600-vac-max","title":"Allen-Bradley Contactor 500-TO*930 600 VAC MAX","description":"\u003cp\u003eThe Allen-Bradley 500-TO*930 is a NEMA Size 00 industrial contactor designed for motor control and auxiliary switching applications. The nameplate identifies a maximum continuous voltage rating of 600 VAC and compliance with IEC\/EN 60947-4-1 and 60947-5-1 standards. It carries UL Listing 728B and is marked for use with copper conductors only, up to #10 AWG, 75°C. The unit is rated AC-3 with horsepower ratings of 0.33 HP at 115V (1-phase) and up to 2 HP at 460–575V (3-phase). AC-1 rating is 32A at 690V, with auxiliary contact rating of 20A. Short circuit rating is 5kA at 600V with fuses and 5kA at 480V with circuit breaker protection. Power terminal tightening torque is specified at 13.3–17.7 lb-in. The contactor is marked “Break all lines” and includes NEMA A600 auxiliary contact designation. Manufactured in Switzerland, this unit is suitable for industrial motor starting and control panel integration where NEMA Size 00 specifications are required.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-432\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49494494118128,"sku":"m00432","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/432.webp?v=1775223261"},{"product_id":"ls-metasol-series-mc-185a-magnetic-contactor-rated-100-200v","title":"LS Metasol Series MC-185a Magnetic Contactor Rated 100–200V","description":"\u003cp\u003eLS Metasol Series MC-185a magnetic contactor rated 100–200V with universal control voltage compatibility. Nameplate indicates AC 100–240V 50\/60Hz and DC 100–220V coil rating. Marked 2a2b configuration. Unit carries CE, cULus, and EAC markings. Net weight listed as 5.9 kg. Manufactured date shown as 2015.09.04 with printed code 1366000200. Heavy-duty industrial contactor designed for panel mounting in electrical control systems and motor control applications. Front housing marked MC-185a and Metasol with LS branding. Suitable for integration into automation cabinets and power distribution assemblies requiring compatible voltage control circuits within the specified AC or DC ranges. Clean front operator interface with mechanical switching assembly and terminal access points for line and load connections. End cleanly.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-438\u003c\/p\u003e","brand":"LS","offers":[{"title":"Default Title","offer_id":49494494281968,"sku":"m00438","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/438.webp?v=1775161765"},{"product_id":"allen-bradley-motor-starter-509-dod-200v-02005","title":"Allen-Bradley Motor Starter 509-DOD 200V","description":"\u003cp\u003eUsed in industrial motor control applications, the Allen-Bradley 509-DOD is a full-voltage non-reversing NEMA motor starter rated for 3-phase, 3-pole service at 200V. The catalog number 509-DOD corresponds to a Size 4 NEMA starter configuration, suitable for motors up to 25 HP at 200V. This unit includes an overload relay assembly with a warning label indicating heater elements must be installed prior to operation. A supplementary circuit breaker is mounted to the top of the assembly. The contactor section features heavy-duty line and load terminals with large-gauge lug connections sized for the current ratings associated with this frame size. A small auxiliary contact block is visible on the lower portion of the assembly. The unit shows signs of prior installation and use. No heater elements are confirmed present. Coil voltage is not confirmed from visible photos and should be verified prior to installation. The 509-DOD is a widely used starter in legacy machine tool, pump, compressor, and HVAC control panels requiring NEMA-rated motor switching at 200V, 3-phase.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02005\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49512177860848,"sku":"m02005","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/0F3492FA-6A19-49F8-AEBF-C2FD0BA0582B.jpg?v=1777049434"},{"product_id":"allen-bradley-contactor-505-eod-02021","title":"Allen-Bradley Contactor 505-EOD","description":"\u003cp\u003eAllen-Bradley 505-EOD Size 4 AC contactor, catalog number 505-EOD Series B, rated for 3-phase 3 to 5 pole configurations. Nameplate confirms maximum continuous current of 135 amps at 600V AC. Motor horsepower ratings per nameplate: 40 HP at 200V, 50 HP at 230V, and 100 HP at 460 to 575V. Assembled in Mexico. This is a Size 4 IEC-style full voltage non-reversing motor starter contactor from Allen-Bradley's 500 series line, commonly used in motor control centers and standalone motor control applications for larger industrial AC motors. The 505 series is a well-established platform in North American industrial environments, with widespread use in manufacturing, process, and heavy equipment applications. Two units are visible in the photos mounted on a common plate and interconnected with red wiring, consistent with a reversing contactor assembly configuration. Item is offered as the pair as shown. Condition is used. Serial number not confirmed from visible nameplate. Coil voltage not confirmed from visible photos and should be verified prior to installation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02021\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49512178614512,"sku":"m02021","price":9999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/80D04C0A-8ECE-4F71-8AF2-7E51AE0E5CF5.jpg?v=1776886571"},{"product_id":"allen-bradley-motor-starter-505-aod-02023","title":"Allen-Bradley Motor Starter 505-AOD","description":"\u003cp\u003eThe Allen-Bradley 505-AOD is a NEMA Size 0 full-voltage non-reversing motor starter rated for 3-phase, 3-pole operation. The nameplate confirms a maximum continuous rating of 18 amps at 600V AC, with motor horsepower ratings of 3 HP at 200V, 3 HP at 230V, and 5 HP at 460-575V. The coil assembly installed on this unit is marked 115-120V at 60 Hz and 110V at 50 Hz, with coil designation CB236 visible on the coil housing. Series C is confirmed on the nameplate. The unit was assembled in Mexico per nameplate data. Part number 505-AOD is the OEM catalog number used consistently in Allen-Bradley documentation and US market listings for this starter configuration. The 505 series is a long-production NEMA full-voltage starter line commonly used in machine tool, pump, conveyor, and general industrial motor control applications. The item shows signs of prior installation and use. No testing or functional verification is implied or warranted.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02023\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49512178778352,"sku":"m02023","price":489.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/21FC8409-75E1-4DB9-86BC-A9E8B4102B32.jpg?v=1776887856"},{"product_id":"allen-bradley-motor-starter-509-dod-200v-02026","title":"Allen-Bradley Motor Starter 509-DOD 200V","description":"\u003cp\u003eUsed in industrial motor control applications, the Allen-Bradley 509-DOD is a full-voltage non-reversing NEMA motor starter rated for 3-phase, 3-pole service at 200V. The catalog number 509-DOD corresponds to a Size 4 NEMA starter configuration, suitable for motors up to 25 HP at 200V. This unit includes an overload relay assembly with a warning label indicating heater elements must be installed prior to operation. A supplementary circuit breaker is mounted to the top of the assembly. The contactor section features heavy-duty line and load terminals with large-gauge lug connections sized for the current ratings associated with this frame size. A small auxiliary contact block is visible on the lower portion of the assembly. The unit shows signs of prior installation and use. No heater elements are confirmed present. Coil voltage is not confirmed from visible photos and should be verified prior to installation. The 509-DOD is a widely used starter in legacy machine tool, pump, compressor, and HVAC control panels requiring NEMA-rated motor switching at 200V, 3-phase.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02026\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49512178909424,"sku":"m02026","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/0c8fbdb5-2442-4356-9e7b-b413014d2d0f.webp?v=1775742595"},{"product_id":"allen-bradley-contactor-100-a75-600-vac-02108","title":"Allen-Bradley Contactor 100-A75 600 VAC","description":"\u003cp\u003eThe Allen-Bradley 100-A75 is a 3-pole IEC-style AC contactor rated for use in industrial motor control and switching applications. The nameplate label confirms a NEMA\/EEMAC rating of A600 and P300, with UL and CSA listings and a Made in USA designation. Coil voltage options shown on the nameplate cover a wide range: 12-120V DC, 220-240V AC, 380-480V AC, and 500-600V AC, making this contactor compatible with a broad spectrum of control circuit voltages. The unit carries an IEC 337-1 \/ VDE 0660 rating with Ui of 660V.\u003c\/p\u003e\n\n\u003cp\u003eMounted to the contactor is an Allen-Bradley 195-GA10 A overload relay, confirmed by the auxiliary contact block label. The relay label identifies it as Series compliance with IEC 337-1 and VDE 0660, rated at 10A, with a current range table consistent with the contactor frame size.\u003c\/p\u003e\n\n\u003cp\u003eThe main body shows the characteristic yellow Allen-Bradley cover with terminal designations L1, L2, L3 (line side) and T1, T2, T3 (load side) clearly marked, along with auxiliary contact terminals 13\/14. The unit is mounted on a black base plate with wiring leads attached, removed from a prior installation. Physical construction is heavy-duty, consistent with an IEC A-frame size rated for motor loads in the 75A range.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02108\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49624357798128,"sku":"m02108","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/691266B4-C861-476C-80BE-26BDD45881AC.jpg?v=1777399200"},{"product_id":"allen-bradley-contactor-100-b110n3-02109","title":"Allen-Bradley Contactor 100-B110N*3","description":"\u003cp\u003eThe Allen-Bradley 100-B110N*3 is a 3-pole IEC power contactor rated for AC3 service at 110A maximum. Nameplate data confirms catalog number 100-B110N*3, Series B, with a coil voltage position designated by the asterisk in the catalog number, indicating the coil voltage code is field-specified at installation. AC3 kW ratings are stamped on the nameplate as follows: 30 kW at 220\/230V, 55 kW at 380\/400\/415V, and 75 kW at both 500V and 660\/690V. Additional nameplate specifications include Ui of 690V, Ith of 160A, and AC1 Ie of 160A. Certifications visible on the nameplate include IEC 947, BS 5424, VDE 0660, and CE marking. The unit is also UL listed, as indicated by the partial UL marking visible at the bottom of the nameplate. Power terminals are labeled L1, L2, L3 on the line side and T1, T2, T3 on the load side. An auxiliary contact block is mounted to the front face of the contactor, bearing catalog number 195-GA10A, NEMA\/EEMAC A600 P300, rated per the auxiliary block nameplate at various HP values across 120V through 600V. The contactor body is constructed in a two-piece black and aluminum-topped housing typical of the Allen-Bradley 100-B series IEC frame. This unit was removed from service and shows surface wear consistent with prior industrial installation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02109\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49624669880560,"sku":"m02109","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/2EE44864-1195-42E9-91B5-280C2937E142.jpg?v=1777404112"},{"product_id":"allen-bradley-magnetic-motor-starter-509-bod-02110","title":"Allen-Bradley Magnetic Motor Starter 509-BOD","description":"\u003cp\u003eThe Allen-Bradley 509-BOD is a Size 1 full-voltage magnetic motor starter manufactured by Allen-Bradley in Milwaukee, Wisconsin, USA. The unit carries catalog number 509-BOD, Series B, and is rated for continuous duty at up to 600V AC maximum. The integrated coil is rated 115–120V at 60Hz (also 110V at 50Hz per the coil label). Motor ratings are as follows: 3-phase, 3 to 5 pole configuration supports up to 7.5 HP at 200V and 230V, and up to 10 HP at 460–575V; single-phase, 2-pole supports 2 HP at 115V and 3 HP at 230V. The assembly includes an overload relay with a manual reset button and a trip indicator. Line terminals are labeled L1, L2, and L3, and the unit features auxiliary contact provisions visible on the side. This starter is a three-pole, across-the-line design suitable for industrial motor control applications. The unit was removed from service and shows surface wear consistent with field use. UL and CSA listed per the nameplate. Compatible with Allen-Bradley Series 509 accessories including heater elements and auxiliary contacts per the 509 platform.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02110\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49624685347056,"sku":"m02110","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/4FA8A10D-6919-4FE8-848D-64CD0D9BBD50.jpg?v=1777404461"},{"product_id":"allen-bradley-magnetic-motor-starter-509-bod-02135","title":"Allen-Bradley Magnetic Motor Starter 509-BOD","description":"\u003cp\u003eThe Allen-Bradley 509-BOD is a NEMA Size 1 full voltage non-reversing magnetic motor starter rated at 27 amps continuous and 600V AC maximum. The catalog number is 509-BOD, Series B, manufactured by Allen-Bradley (A-B) in the USA. The coil voltage visible on the unit is 115-120V at 60Hz, with an alternate rating of 110V at 50Hz. Maximum horsepower ratings per the nameplate are 7.5 HP at 200V and 230V for three-phase 3 to 5 pole operation, 10 HP at 460-575V three-phase, and 2 HP at 115V single phase or 3 HP at 230V single phase. The starter features three main power poles labeled L1, L2, and L3, a manual RESET button on the overload relay, and a TIPPED indicator visible on the overload assembly. An integrated eutectic alloy overload relay is mounted to the assembly. Two short red lead wires are present on the unit. The open-type construction is designed for panel or enclosure mounting and is non-combination, meaning it does not include a fused disconnect. The 509 series is a legacy Allen-Bradley product line that has been discontinued and replaced by more current offerings, which makes surplus units relevant for maintenance, repair, and replacement applications in existing installations.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02135\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49630237032688,"sku":"m02135","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/FC5F5FDF-0374-46AC-9A0A-281EF9476A2D.jpg?v=1777479415"},{"product_id":"allen-bradley-ac-lighting-contactor-702l-cod93-02133","title":"Allen-Bradley AC Lighting Contactor 702L-COD93","description":"\u003cp\u003eUsed in commercial and industrial electrical distribution panels, the Allen-Bradley 702L-COD93 is a 3-pole AC lighting contactor rated for 60 amps continuous at 600V AC maximum. Catalog number 702L-COD93, Series K, Bulletin 702L. The coil is rated 120V AC at 60 Hz and 110V AC at 50 Hz, coil designation 72A86. The unit is designed for non-motor loads including general use, ballast lamp, and mercury vapor or fluorescent lighting applications. Tungsten lamp load ratings are 277V AC maximum on the load side and 480V AC maximum on the line side. Three normally open silver contacts are configured for panel mounting. The contactor is manufactured by Rockwell Automation under the Allen-Bradley brand in Milwaukee, Wisconsin, USA, and is UL and CSA listed. This model is discontinued by the manufacturer and is no longer in current production. The unit presented here is used surplus, removed from service. All visible nameplate data has been recorded; no operational testing or condition verification is represented.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02133\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49630241882352,"sku":"m02133","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/2FF7F20C-E482-4B73-A70A-F7107B2991FC.jpg?v=1777479833"},{"product_id":"allen-bradley-contactor-500f-bod930-120v-ac-02136","title":"Allen-Bradley Contactor 500F-BOD930 120V AC","description":"\u003cp\u003eUsed in motor control panels and industrial automation systems, the Allen-Bradley 500F-BOD930 is a NEMA Size 1 feed-through contactor rated at 27 amps continuous and 600VAC maximum. The unit carries catalog number 500F-BOD930 and is Series C per the nameplate. The three-pole configuration supports three-phase loads with a maximum rating of 10 HP at 480-575V and 7.5 HP at 200-230V for three-phase applications, or 3 HP at 230V for single-phase two-pole use. The coil assembly visible in the photos is marked CB236, rated at 110V\/50Hz and 115-120V\/60Hz, consistent with standard North American control voltage. A 595-A series auxiliary contact block is mounted to the assembly. The unit includes a DIN rail mounting bracket. UL Listed and CE marked per the nameplate label. This item is removed surplus and has not been tested or evaluated for function. Condition is as shown in photos.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02136\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49675692212464,"sku":"m02136","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/50B301BA-F6A5-4E93-8209-79FD6B720146.jpg?v=1777900750"},{"product_id":"allen-bradley-lighting-contactor-500l-bod93-115-120v-60hz-coil-02137","title":"Allen-Bradley Lighting Contactor 500L-BOD93 115-120V 60Hz Coil","description":"\u003cp\u003eUsed in commercial and industrial lighting control applications, the Allen-Bradley 500L-BOD93 is a NEMA Size 1 electrically held lighting contactor rated at 30 amps with three main power poles. The contactor features top wiring configuration and an open-style enclosure. Coil voltage is 115-120V at 60Hz (also rated 110V at 50Hz), as confirmed on the visible coil label stamped CB236. The nameplate identifies this as Series B and is manufactured by Allen-Bradley in Milwaukee, Wisconsin. Load ratings visible on the nameplate include tungsten lamp load up to 277V line and 480VAC max, resistive heating loads, ballast loads, fluorescent loads, and mercury vapor lamps up to 500VAC max. Part number 500L-BOD93 is the OEM catalog designation for this NEMA top-wired lighting contactor bulletin. The unit is offered as removed surplus. Serial number is not visible in available photos. This contactor is compatible with Allen-Bradley 500L series lighting control systems and is commonly found in panel boards, lighting motor control centers, and standalone lighting control enclosures.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0426-02137\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49675762303216,"sku":"m02137","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/2323D067-A4DC-4266-910C-04E69A4C4332.jpg?v=1777901179"},{"product_id":"square-d-line-arc-dc-contactor-51019-332-04-02192","title":"Square D LINE-ARC DC Contactor 51019-332-04","description":"\u003cp\u003eUsed in crane bridge, trolley, and heavy industrial DC motor control applications, the Square D EC\u0026amp;M Class 7004 Type MGO-1 is a single-pole, normally open LINE-ARC DC magnetic contactor rated NEMA Size 5. The assembly part number is 51019-332-04 as shown on the shipping label, with the installed operating coil marked 51019-243-93 and rated 230\/240 VDC. Per published Square D Class 7004 specifications, the NEMA Size 5 MGO-1 contactor is rated for 600 volts DC maximum and 300 amperes continuous duty (8-hour rating), with a single normally open power pole. The unit is manufactured in Mexico, consistent with Square D \/ Schneider Electric production markings visible on the frame casting. The iridescent gold metal arc chute plate is present and marked EC\u0026amp;M 1435 No. 5, confirming the NEMA Size 5 arc suppression assembly. The contactor body, coil housing, and mechanical linkage components are all present and visible. Brass power terminals are intact. This contactor type is a direct replacement or spare for Square D Class 7004 Type M LINE-ARC DC contactor applications across mill-duty, crane hoist, and industrial drive systems requiring single-pole DC switching at the NEMA Size 5 current rating. Part is sold as-is surplus.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02192\u003c\/p\u003e","brand":"Square D","offers":[{"title":"Default Title","offer_id":49693940842736,"sku":"m02192","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/586386F3-339F-4FC9-A23A-799B7228CEF1.jpg?v=1778169338"},{"product_id":"allen-bradley-contactor-100-d115d11-02226","title":"Allen-Bradley Contactor 100-D115D11","description":"\u003cp\u003eThe Allen-Bradley 100-D115D11 is a Bulletin 100-D series IEC non-reversing AC magnetic contactor rated for 115 amps at 600V AC. It is configured as a 3-pole, 3-phase device suitable for motor control applications up to 40 HP at 200V, 40 HP at 230V, 75 HP at 460V, and 100 HP at 575V. The coil is rated for 110V AC at 50Hz and 120V AC at 60Hz, as marked on the label. Auxiliary contacts are factory configured 1 N.O. and 1 N.C., per the D11 suffix designation. Series B, as confirmed on the box label. UL Listed, CE marked, and CCC certified. Manufactured in the Czech Republic by Rockwell Automation. The unit is presented in its original cardboard packaging with original installation documentation included. Catalog number 100-D115D11 is part of the Allen-Bradley Bulletin 100-D IEC contactor family, widely used in industrial motor starters, machine tool control panels, and automation switchgear. Compatible with Bulletin 100-D accessories including auxiliary contact blocks, surge suppressors, and mechanical interlocks. The part number suffix D11 identifies the coil voltage and contact configuration and distinguishes this variant from electronic coil versions such as the ED11 suffix.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02226\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49704031813872,"sku":"m02226","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/0350A062-C47E-4729-BCFA-7FE6BF3C8AB6.jpg?v=1778253677"},{"product_id":"allen-bradley-contactor-100-e190kd11-100-250v-acdc-02233","title":"Allen-Bradley Contactor 100-E190KD11 100-250V AC\/DC","description":"\u003cp\u003eThe Allen-Bradley 100-E190KD11 is a 3-pole IEC contactor from the Bulletin 100-E MCS-E series, manufactured by Rockwell Automation and produced in Sweden. The nameplate confirms catalog number 100-E190KD11, Series B, with a coil voltage range of 100 to 250 Volts AC\/DC at 50\/60 Hz. The contactor is rated AC-1 at 1000V and 250 Amps, with AC-3 current ratings of 190 Amps across the applicable voltage range. Power ratings visible on the nameplate include 55 kW at 230V through 132 kW at 690V for AC-3 motor duty. Auxiliary contacts are configured as 1 normally open and 1 normally closed, with terminal designations ES1-11, NC-21, and NC-22 visible on the unit. The coil terminals are labeled A1 and A2. Load terminals are labeled 1\/L1, 3\/L2, 5\/L3 on the line side and 2\/T1, 4\/T2, 6\/T3 on the load side. Terminal connections are rated 18 Nm (160 lb-in) for standard lugs, with a terminal lug kit 100-ETL205 available for 34 Nm (300 lb-in) and conductor sizes from 6 AWG to 300 MCM. The unit is UL Listed (IND. CONT. EQ 776D), CE marked, EAC marked, and CCC certified. The serial number is 1S1601187229G02405, and the date code on the nameplate reads 2022\/12\/15. Compatible with Rockwell Automation Bulletin 100-E accessories including auxiliary contact blocks, terminal lug kits, and overload relays. Suitable for motor control, load switching, and industrial automation panel applications requiring IEC-rated 3-pole contactors in the 160 to 250 Amp class.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02233\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49704155807984,"sku":"m02233","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/5307801D-E99A-486F-843B-31855AEBC301.jpg?v=1778258771"},{"product_id":"allen-bradley-dc-control-relay-700dc-p800z2-230-to-250v-dc-02240","title":"Allen-Bradley DC Control Relay 700DC-P800Z2 230 to 250V DC","description":"\u003cp\u003eThe Allen-Bradley 700DC-P800Z2 is a Bulletin 700DC Type P NEMA heavy duty DC operated control relay, Series E, with a coil voltage rating of 230 to 250V DC. The unit carries eight normally open contacts in a rail mount configuration and is intended for industrial control panel applications where DC coil operation is required. Contact ratings per the nameplate include NEMA P600 designation with 10A at 600V AC switching capability and corresponding DC ratings across the 6 to 600V DC range. Make and break VA ratings are listed as 7200VA make and 720VA break on AC service, with DC make and break values of 120VA, 138VA, and 5A depending on the voltage band referenced on the rating plate. The relay is UL listed and CE marked, manufactured in Mexico under the Allen-Bradley brand by Rockwell Automation. Bulletin 700 P frame relays use bifurcated double break contact cartridges designed to reduce contact welding and improve reliability when breaking DC loads. The product carries catalog number 700DC-P800Z2 and material number 3001127465. Typical applications include motor control centers, machine tool control panels, process control systems, and any DC powered control circuit requiring multiple normally open contacts on a single coil. The item is presented in original Allen-Bradley packaging with bubble wrap and matching outer carton labeling that identifies the catalog number, series, and voltage range.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02240\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49723297431792,"sku":"m02240","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/1E940C0B-9EF6-4B24-AB2C-43728E2FB54A.jpg?v=1778690551"},{"product_id":"allen-bradley-nema-size-1-motor-starter-509-bod-02245","title":"Allen-Bradley NEMA Size 1 Motor Starter 509-BOD","description":"\u003cp\u003eThe Allen-Bradley 509-BOD is a NEMA Size 1 full voltage non-reversing motor starter from Rockwell Automation's Bulletin 509 line. This unit ships as new surplus in the original factory carton with the 592-EUTB eutectic alloy overload relay packaged separately inside the same box, along with the original installation instructions and heater element selection table (Table 150). The starter is rated for 600VAC maximum, 3 phase operation, with a 115\/120V AC coil at 60Hz (110V at 50Hz). Continuous current rating is 27 amps. Maximum horsepower ratings include 7.5 HP at 200VAC, 7.5 HP at 230VAC, 10 HP at 460VAC, and 10 HP at 575VAC. The 592-EUTB overload relay is configured for NEMA Size 0-1 applications and uses field installable eutectic alloy heater elements (sold separately, sized per motor full load amps using Rockwell Table 150). The assembly is an open type design without enclosure, suitable for panel mounting inside a customer supplied enclosure or motor control center bucket. Carries UL, cUL, and CE markings. Manufactured at Rockwell Plant 1040 in Mexico. Series A overload relay paired with Series 1 starter. Part number 509-BOD with material number PN-76741 on the starter carton and PN-66619 on the overload relay carton. Suitable for general purpose motor branch circuit control where separate short circuit and ground fault protection is provided upstream. Manual reset overload with visible tripped indicator.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02245\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":49725410509040,"sku":"m02245","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/7E922F32-3D78-4830-8716-FE6068DE582B.jpg?v=1778768047"},{"product_id":"electro-motive-division-general-motors-corporation-magnetic-switch-contactor-emd-pt-no-8464117-14-192-330-505-02263","title":"Electro Motive Division General Motors Corporation Magnetic Switch Contactor EMD PT NO 8464117 14-192-330-505","description":"\u003cp\u003eThe Electro Motive Division (General Motors Corporation) part number 8464117 is a heavy duty magnetic switch contactor rated for 1000 amperes, used in EMD diesel electric locomotive electrical control assemblies. The unit is built by Siemens under drawing number 14-192-330-505 and carries Siemens inspection tag dated August 16, 1991, with serial number 41H03M79002 014. The integrated operating coil is a Siemens 14-183-219-501, N-1044, rated at 28 VDC.\u003c\/p\u003e\n\n\u003cp\u003eConstruction includes large copper power terminals on both poles, an arc chute assembly with insulated barriers, return spring, auxiliary contact block with spade terminations, and a molded base. The polarity-marked coil terminals (+ and minus) are wired with red and black leads, and a multi-pin auxiliary connector is fitted alongside the magnet frame. The contactor is identified as a Magnetic RVF \/ RVR type switch within EMD locomotive parts catalogues, used in reversing and main power switching applications inside the locomotive electrical cabinet.\u003c\/p\u003e\n\n\u003cp\u003eStamped and printed markings on the unit include the EMD nameplate (EMD PT NO 8464117, AMPERES 1000), the Siemens coil identification plate, a Made in Canada \/ Fabriqué au Canada label, and QA inspected and tested stamps. The original yellow Siemens inspection tag identifies a manufactured batch of 24 units on order 984630, routed To Stock. Item arrives in original molded foam packaging. Buyers requiring railway locomotive obsolete electrical spares for EMD platforms typically reference part number 8464117 or the prior equivalent 8341261.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02263\u003c\/p\u003e","brand":"Electro Motive Division General Motors Corporation","offers":[{"title":"Default Title","offer_id":49725624516848,"sku":"m02263","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/A8D3C15D-5987-40E3-A7C6-244D254E046E.jpg?v=1778775906"},{"product_id":"square-d-contactor-8903s002-02270","title":"Square D Contactor 8903S002","description":"\u003cp\u003eThe Square D 8903S002 is a 100 amp, 3 pole electrically held lighting contactor rated for up to 600 VAC, 60 Hz operation. The nameplate confirms a maximum tungsten load rating of 277V single phase and 480V three phase, ballast load rating of 347V single phase and 600V three phase, and resistance heating rating of 600V single and three phase. The operating coil is rated 120V 60Hz \/ 110V 50Hz. This Series A unit carries the internal reference 31074 400 38 and is UL Listed and CSA Certified. Part of the Square D Class 8903 Type S product family, the S002 is designed for switching lighting loads in commercial and industrial panelboards, motor control centers, and standalone enclosures. The three power poles are accessed through bolt down lug terminations sized for large gauge feeder conductors, with separate screw type control terminals located near the coil for the 120V control wiring. The coil and contact assemblies are field replaceable through the front of the device. Typical applications include parking lot lighting, warehouse high bay lighting, exterior architectural lighting, sign circuits, and resistive heating loads where remote on \/ off control through a low voltage pilot device is required. The device is suitable for use in 3 phase, 3 wire and 3 phase, 4 wire distribution systems within its published voltage and current limits.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02270\u003c\/p\u003e","brand":"Square D","offers":[{"title":"Default Title","offer_id":49725908943088,"sku":"m02270","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/EAA28F64-A423-4C33-946A-38C4378DDC6A.jpg?v=1778785054"},{"product_id":"general-electric-magnetic-starter-cr306f002zbng-600v-ac-02280","title":"General Electric Magnetic Starter CR306F002ZBNG 600V AC","description":"\u003cp\u003eThe General Electric CR306F002ZBNG is a NEMA Size 4 full voltage non reversing magnetic motor starter from the 300 Line series, designed for across the line motor control in three phase industrial applications. Rated for a maximum of 600V AC with a continuous current rating of 135 amps, this open type starter accommodates motor loads up to 40 HP at 200V, 50 HP at 230V, and 100 HP at 460 \/ 575V three phase. The assembly includes the integral CR305 contactor, a three pole power section, and a three leg thermal overload relay block for protection across all phases. The control coil is rated 115 to 120V AC at 60 Hz or 110V AC at 50 Hz. Saddle clamp terminals provide secure connections for a range of conductor sizes, with staggered phase arrangement to simplify wiring. Toolless contactor disassembly allows direct access to the magnet, coil, and contact assemblies for inspection or maintenance. Silver cadmium oxide contact tips offer weld resistant performance during repeated switching cycles. Manual reset is provided on the overload relay. The CR306 platform supports a broad range of accessory kits including auxiliary contacts, replacement coils, mechanical interlocks, surge suppressors, and control circuit fusing. Made in USA at the Bloomington, Illinois facility. UL listed and CSA certified for industrial control equipment applications. Suitable as a replacement in existing GE 300 Line motor control centers, pump panels, HVAC equipment, conveyor systems, compressors, and other heavy duty three phase motor loads.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02280\u003c\/p\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":49726061445360,"sku":"m02280","price":2740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/736C7A83-B9A2-4073-BFA9-736045174B03.jpg?v=1778789075"},{"product_id":"joslyn-clark-nema-size-1-motor-starter-t13u031-600-vac-02282","title":"Joslyn Clark NEMA Size 1 Motor Starter T13U031 600 VAC","description":"\u003cp\u003eThe Joslyn Clark T13U031 is a NEMA Size 1 magnetic motor starter rated for 27 amps at up to 600V AC. Manufactured in Lancaster, SC, this Bulletin 6013 Type TM starter is supplied inside its matching general purpose NEMA 1 surface mount steel enclosure (UL listed Type 734 G). The unit is constructed with a 3 pole power section, screw type line and load terminals, and an integrated 3 pole overload relay block with heater elements installed. Maximum horsepower ratings per the nameplate are 2 HP at 115V single phase, 3 HP at 230V single phase, 7.5 HP at 200V and 230V three phase, and 10 HP at 460 to 575V three phase. The interior label specifies suitability for use on a circuit capable of delivering not more than 5,000 RMS symmetrical amperes, 600 volts maximum, with #14 to #4 AWG wiring at 35 lb in screw torque, using 60\/75 degree C copper conductors only. The enclosure features multiple concentric knockouts on top, bottom, and sides for conduit entry, a hinged latching cover, and an internal wiring diagram label covering pilot device connections, momentary contact pushbutton configurations, separate control wiring, and heater selection by motor full load current. Type TM accessory components and KTM auxiliary contacts are compatible with this device. Applications include across the line starting of three phase squirrel cage induction motors in industrial machinery, pumps, fans, conveyors, and HVAC equipment. UL and CSA listed. Coil voltage and overload heater catalog values should be verified against the application.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02282\u003c\/p\u003e","brand":"Joslyn Clark","offers":[{"title":"Default Title","offer_id":49726085955824,"sku":"m02282","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/BAB80370-E8DB-4F96-B9AB-53B0318FB3F2.jpg?v=1778789737"},{"product_id":"westinghouse-motor-starter-a200m1cacd-6710c87g10-600v-max-3-phase-02288","title":"Westinghouse Motor Starter A200M1CACD \/ 6710C87G10 600V Max, 3 Phase","description":"\u003cp\u003eThe Westinghouse A200M1CACD is a NEMA Size 1 three phase magnetic motor starter from the A200 Series Model J product line, identified by catalog number 6710C87G10 and manufacturing code C970602. This unit is rated for 27 amp continuous current at up to 600V AC maximum, with horsepower ratings of 7.5 HP at 200V three phase, 7.5 HP at 230V three phase, and 10 HP at 460\/575V three phase, as printed directly on the nameplate. Construction is open frame with three pole power contacts, screw terminal line and load connections marked L1, L2, L3 and a bimetallic thermal overload relay mounted to the load side of the contactor assembly. The unit is UL listed under Industrial Control Equipment file 770A and carries CSA certification. Coil voltage and frequency are specified on the coil itself rather than the main nameplate, per the printed instruction on the housing. Made in USA. The A200M1CACD has been superseded by the Eaton Freedom Series A200M1CACD non reversing starter, which retains the same NEMA Size 1, 27 amp, three pole, 600V configuration. Common applications include motor branch circuit control for pumps, fans, conveyors, compressors, machine tool drives, HVAC equipment and general purpose industrial three phase motor loads. The thermal overload block provides motor running protection when matched with appropriate heater elements sized to motor full load amps. Sold as used surplus.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02288\u003c\/p\u003e","brand":"Westinghouse","offers":[{"title":"Default Title","offer_id":49730347499760,"sku":"m02288","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/6DF6C17D-9294-4FDA-9448-7AD232A69ECD.jpg?v=1778857179"},{"product_id":"square-d-enclosed-ac-magnetic-contactor-8502sda2v02s-02319","title":"Square D Enclosed AC Magnetic Contactor 8502SDA2V02S","description":"\u003cp\u003eThe Square D 8502SDA2V02S is a NEMA Size 2 enclosed AC magnetic contactor manufactured by Schneider Electric. This Class 8502 Type S non reversing contactor is rated for 45 amperes at 600 VAC maximum, three pole, three phase, and is housed in a NEMA Type 12\/3R painted sheet steel enclosure suitable for indoor industrial environments and outdoor rainproof applications. Maximum horsepower ratings include 10 HP at 200V, 15 HP at 230V, and 25 HP at 460\/575V on three phase 60 Hz service. The internal contactor carries the open device identifier 8502SDO2S with coil part number 31063,409,38 rated 120V 60 Hz \/ 110V 50 Hz. The unit is UL Listed under Industrial Control Equipment file A159 and CSA certified under LR 60905. Date code 1544 indicates assembly in week 44 of 2015, with the contactor module date code 1537. The barcode reads 3741424000400. Type S magnetic contactors are used to switch heating loads, capacitors, transformers, and electric motors where overload protection is provided separately. A normally open holding circuit contact for three wire control is included as standard. The enclosure includes a hinged cover with quarter turn latches, Square D safety labeling, and a conduit hub on top. The carton, instruction bulletin 30072,007,85B, and Device Terminal Identification document are present.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02319\u003c\/p\u003e","brand":"Square D","offers":[{"title":"Default Title","offer_id":49730473230576,"sku":"m02319","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/27151A4C-7D42-4445-ADB5-A1B92457ACF6.jpg?v=1778859172"},{"product_id":"square-d-lighting-contactor-8903sqo2v02-02320","title":"Square D Lighting Contactor 8903SQO2V02","description":"\u003cp\u003eThe Square D 8903SQO2V02 is a Type S multipole lighting contactor rated for 100 amperes at up to 600 VAC, configured with three poles and three normally open contacts. This is an electrically held, open type unit with a 110\/120 VAC 50\/60 Hz operating coil. The catalog number 8903SQO2V02 falls within the Square D Class 8903 product family, designed for switching lighting loads in commercial and industrial installations. Nameplate ratings cover tungsten lamp loads to 277 V single phase or 480 V three phase, ballast lamp loads to 347 V single phase or 600 V three phase, and resistance heating loads to 600 V in either configuration. The unit carries UL Listed and CSA Certified markings. Coil and contacts are field replaceable, allowing service without removing the contactor from its mounting. Date code on the assembly indicates production year 2021 (week 04). The contactor measures approximately 7.26 inches tall, 5.45 inches wide, and 6.50 inches deep. UPC 785901619420. Typical applications include outdoor parking lot lighting circuits, sign lighting, gymnasium and warehouse high bay lighting, and commercial HVAC resistance heating circuits where remote pilot device control of branch circuits is required. The 8903SQO2V02 is sold by Schneider Electric under both the Square D and Schneider Electric brand identities and is the standard catalog reference for this 100 A, 3 pole, electrically held, open style lighting contactor with 120 V coil. Item ships in original manufacturer packaging with foam inserts and sealed protective bag.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02320\u003c\/p\u003e","brand":"Square D","offers":[{"title":"Default Title","offer_id":49730500624624,"sku":"m02320","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/6B1F821E-2DD0-4F9B-997D-BE7B748D4FAA.jpg?v=1778859745"},{"product_id":"square-d-ac-magnetic-motor-starter-8536sdo1v02s-02317","title":"Square D AC Magnetic Motor Starter 8536SDO1V02S","description":"\u003cp\u003eThe Square D 8536SDO1V02S is a NEMA Size 2 AC magnetic motor starter manufactured by Schneider Electric under Class 8536, Type S, Series A. Designed for full voltage non reversing starting and stopping of three phase AC squirrel cage motors, this open style starter is rated for 45 amperes continuous duty across three poles at a maximum system voltage of 600V AC, 50\/60 Hz. Horsepower ratings are 10 HP at 200V, 15 HP at 230V, and 25 HP at 460\/575V three phase, corresponding to 7.5 kW, 11 kW, and 18.5 kW respectively. The operating coil is rated 120V AC at 60 Hz or 110V AC at 50 Hz and is wired for separate control. Overload protection is provided by a melting alloy thermal overload relay configured for three Type B thermal units, which are field installed based on motor full load amperage. The starter is UL Listed, CSA Certified, and bears NOM and CE markings, with assembly in Mexico. Order number 88212, UPC 785901882121. Typical applications include pumps, fans, conveyors, compressors, machine tools, and other industrial motor loads requiring NEMA rated control reliability. The open construction allows installation inside a customer supplied enclosure or motor control center. Direct OEM replacement for legacy 8536SDO1S configurations using a 120V control coil.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0526-02317\u003c\/p\u003e","brand":"Square D","offers":[{"title":"Default Title","offer_id":49730906128624,"sku":"m02317","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/977F2349-3BDB-4F5B-A5C5-A2CE3C13141D.jpg?v=1778869513"}],"url":"https:\/\/mroexchange.com\/collections\/contactors.oembed","provider":"MRO Exchange","version":"1.0","type":"link"}