{"title":"Fixture Plates","description":"","products":[{"product_id":"angular-clamping-device-heavy-duty-cast-iron-right-angle-plate-59-12-h-x-30-12-w-x-30-12-l-0226-294","title":"Angular Clamping Device Heavy-Duty Cast Iron Right Angle Plate | 59 1\/2 H x 30 1\/2 W x 30 1\/2 L","description":"\u003cp\u003eThis heavy-duty cast iron right angle plate features a webbed open-back construction with two cast horizontal ribs providing structural rigidity under machining loads. The vertical face is equipped with a uniform grid of drilled and tapped holes for versatile clamping and fixture point placement. Additional drilled holes are present along the base and side faces for securing the unit to a machine table, rotary table, or floor plate. A forged lift ring is mounted to the top center for overhead crane handling. A clamp or stop bolt assembly is installed on the vertical face. The casting shows a red oxide primer finish consistent with traditional machine tool workholding equipment. No manufacturer nameplate is present. Estimated dimensions are 59 1\/2 H x 30 1\/2 W x 30 1\/2 L, with an estimated weight in the range of 700 to 900 lbs based on cast iron construction and visible wall thickness. Cast iron right angle plates of this type are commonly used as vertical clamping surfaces on horizontal boring mills, jig borers, and large vertical machining centers, and as 90-degree reference fixtures in heavy fabrication and assembly applications. The open webbed back reduces weight while maintaining face rigidity.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-294\u003c\/p\u003e","brand":"Angular Clamping Device","offers":[{"title":"Default Title","offer_id":48819259932912,"sku":"m00294","price":1029.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/172BFED3-D54B-455D-A20B-10C2C7298CCB.jpg?v=1770832181"},{"product_id":"angular-clamping-device-heavy-duty-fabricated-steel-right-angle-plate-24-14l-x-36-w-x-39-34-h-0226-299","title":"Angular Clamping Device Heavy-Duty Fabricated Steel Right Angle Plate | 24 1\/4”L x 36” W x 39 3\/4” H","description":"\u003cp\u003eThis heavy-duty fabricated steel right angle plate is a large-format workholding fixture designed for use in machining, welding, fabrication, and assembly operations requiring a rigid 90-degree reference surface. The vertical face features a uniform grid pattern of drilled and tapped holes providing multiple clamping and fixturing points across the working surface. The base plate is thick-section steel with additional drilled holes for securing the fixture to a machine table or floor plate. Welded gusset construction provides high rigidity under load. A lift ring is welded to the top center of the unit for overhead crane handling. Two threaded studs are installed on the vertical face. The unit sits on a wooden shipping pallet and shows evidence of shop use including surface oxidation and residual machining fluid. No manufacturer nameplate is present. Approximate dimensions24 1\/4”L x 36” W x 39 3\/4” H, with an estimated weight in the range of 600 to 900 lbs based on visible construction and material thickness. This type of fixture plate is commonly used as a vertical clamping surface on horizontal boring mills, large machining centers, and transfer line fixtures, and as a setup reference in heavy fabrication environments.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-299\u003c\/p\u003e","brand":"Angular Clamping Device","offers":[{"title":"Default Title","offer_id":48819329106160,"sku":"m00299","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/0597211F-CA8E-4B37-8910-9B5F8EFF84A6.jpg?v=1770834440"},{"product_id":"rotary-index-table-019-45623-00-60-in-x-96-in-t-slotted-work-surface-0226-764","title":"Rotary Index Table 019-45623-00 | 60 in. x 96 in. T-Slotted Work Surface","description":"\u003cp\u003eUsed on horizontal boring mills, large machining centers, and heavy-duty manufacturing cells, a large-format T-slotted rotary index table of this type provides a stable, repositionable work surface for oversized or high-mass workpieces. The table measures approximately 60 in. x 96 in. across the T-slotted platen, confirmed by tape measure in the provided photos. The air-lift rotation mechanism allows the platen to be repositioned manually with reduced friction, and four-position 90-degree shot pin indexing provides repeatable positioning at each quadrant. The reference offset plate visible on the side apron reads \"Distance to Table Centerline: 29.992,\" with a reference plate number of 019-45623-00. The cast iron platen features multiple longitudinal T-slots providing numerous fixturing locations across the full working surface. Square lightening pockets are cast into the apron perimeter. A large central rotation bearing is visible beneath the platen, supported by a heavy base casting painted blue. Lifting eyes are present on the base casting for rigging. This size class of rotary index table is typically associated with large-bore horizontal milling and boring operations where full 360-degree manual table rotation with positive-stop indexing is required. Manufacturer identification is pending verification based on construction details and reference plate format consistent with known heavy-duty index table builders.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-764\u003c\/p\u003e","brand":null,"offers":[{"title":"Default Title","offer_id":48919271571696,"sku":"m00764","price":17399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/F52BA6A4-8FD4-4BDA-9E30-D0C91BA9F400.jpg?v=1772202897"},{"product_id":"large-lathe-steady-rest-approx-30-in-bore-inside-diameter-0226-790","title":"Large Lathe Steady Rest | Approx. 30 in. Bore Inside Diameter","description":"\u003cp\u003eA heavy-duty custom fabricated steel machining fixture designed to hold large round or cylindrical workpieces during machining operations. The assembly consists of a two-piece bolted ring cradle with four outboard mounting arms, multiple threaded clamping stud locations distributed around the bore perimeter, and a separate steel base plate with alignment pins and T-slot compatible mounting holes. Construction is welded and machined steel throughout with a painted exterior. The circular bore opening measures approximately 30 in. inside diameter based on visible measurement in the provided photos. The base plate adds significant rigidity and provides a stable mounting interface to a machine table or floor-mounted setup. Locating pins are visible on the base plate to facilitate repeatable positioning. Four swing-style clamping studs are mounted at the cardinal positions around the ring bore to secure a workpiece within the cradle. The overall footprint of the assembly as configured on the pallet is approximately 36 in. square. No manufacturer nameplate or part number markings are visible on this item. The fixture is intended for large-bore turning, boring, or milling applications where a cylindrical or round workpiece must be fixtured outside of a standard lathe chuck or rotary table. This type of custom workholding solution is commonly used in heavy equipment manufacturing, pump and valve machining, motor frame machining, and similar large-component production environments.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-790\u003c\/p\u003e","brand":"Unknown","offers":[{"title":"Default Title","offer_id":48919583195376,"sku":"m00790","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/3C24B419-CA06-4A35-87C3-CF98E29366C5.jpg?v=1772210708"},{"product_id":"angle-plate-48-in-h-x-48-in-w-face-27-in-base-depth-orientation-axial-0226-792","title":"Angle Plate | 48 in. H x 48 in. W Face, 27 in. Base Depth | Orientation: Axial","description":"\u003cp\u003eA large fabricated steel right angle plate available for use in horizontal machining centers, boring mills, and general machine shop setup operations. The vertical face measures approximately 48 in. high by 48 in. wide and features a uniform grid of drilled and tapped holes for direct workpiece clamping without the need for T-slot hardware. Base depth is approximately 27 in., providing a stable footprint when the plate is positioned on a machine table or floor plate. An integrated eye bolt at the top of the vertical face allows for crane or hoist-assisted positioning. The rear of the plate shows ribbed fabricated steel construction designed to resist deflection under load. Overall construction is welded fabricated steel. No manufacturer name, model number, or serial number is present on the piece. The tapped face grid pattern accommodates a wide range of fixture clamps, angle blocks, and strap clamp assemblies. At this size and mass, this angle plate is suited to support large weldments, castings, or fabricated components requiring precise 90-degree orientation relative to the machine spindle. The base perimeter includes bolt-down holes for securing the plate to a machine table or surface plate. Useful in job shops, aerospace, and heavy equipment manufacturing environments where large workpiece setups are required.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-792\u003c\/p\u003e","brand":null,"offers":[{"title":"Default Title","offer_id":48919595778288,"sku":"m00792","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/659A76CE-F3D8-4322-B762-43CC168770B7.jpg?v=1772211038"},{"product_id":"interstate-5c-collet-fixture-mount-09747619-6-in-face-diameter-1-in-head-length-0326-851","title":"Interstate 5C Collet Fixture Mount 09747619 | 6 In. Face Diameter, 1 In. Head Length","description":"\u003cp\u003eThe Interstate 09747619 is a 5C collet fixture mount with a 6 In. face diameter and 1 In. head length, manufactured in China and distributed through MSC Industrial Supply Co. under the Interstate brand. This type of fixture mount serves as a lathe workholding accessory used in place of face plate fixtures, allowing 5C collets to be held in a lathe spindle for secondary operations and fixturing applications. The unit features a heat treated tool steel shank, is precision ground all over, and carries a black oxide finish. The 5C collet interface uses a standard 1.238-20 RH external thread and a 1.041-24 drawbar thread, compatible with standard 5C spindle noses. The soft head is intended to be machined by the end user to suit specific workholding requirements, providing repeat accuracy once set up. The item is packaged in original Interstate branded black box with intact MSC packing slip label dated 11\/02\/17, part number 09747619, and an Interstate product label confirming 6x1 In. dimensions and Made in China origin. The collet series is 5C, consistent with the most widely used collet standard in American manual and CNC lathes.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-851\u003c\/p\u003e","brand":"Interstate","offers":[{"title":"Default Title","offer_id":48965436080368,"sku":"m00851","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/57303B1C-800B-45C4-AB1F-D629E1640A6E.jpg?v=1773088948"}],"url":"https:\/\/mroexchange.com\/collections\/fixture-plates.oembed","provider":"MRO Exchange","version":"1.0","type":"link"}