{"title":"GE Fanuc","description":"\u003cp\u003eIndustrial surplus GE Fanuc parts and equipment, in stock at MRO Exchange.\u003c\/p\u003e","products":[{"product_id":"fanuc-a06b-0315-b001-7000-servo-motor-020226-fan","title":"GE Fanuc A06B-0315-B001#7000 AC Servo Motor 3 HP 2000 RPM","description":"\u003cp\u003eThe GE Fanuc A06B-0315-B001#7000 is an AC Servo Motor from the Model 10S S Series, manufactured in Japan and commonly used in CNC machining centers, lathes, and industrial automation systems. The nameplate identifies this unit as AC Servo Motor Model 10S, Type A06B-0315-B001-B001#7000, Serial No. 8000011524, Date 5\/91. Confirmed electrical and mechanical ratings include 12 Nm stall torque, 7.6 A stall current, 3 phase input, 8 poles, 2000 RPM rated speed, 150 V, Class F insulation, permanent magnet excitation, and 40 degrees C ambient rating. The B001#7000 specification indicates a straight shaft configuration with a 2000P incremental pulse coder for position feedback. This motor is widely deployed as an axis drive in legacy Fanuc CNC platforms and is compatible with corresponding Fanuc S Series servo amplifiers. The A06B-0315-B001 is listed as discontinued by the manufacturer, making surplus units the primary source for direct replacement in installed systems. Specifications referenced from manufacturer published data where not directly visible on the nameplate. Buyers should confirm compatibility with their existing drive, controller revision, and shaft, flange, and connector configuration prior to installation. Part number, serial number, and date code are documented above and visible in the listing photographs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-104\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":48797130555632,"sku":"m00104","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6536.png?v=1783490612"},{"product_id":"ge-fanuc-cnc-operator-panel-series-18i-t-0226-621","title":"GE Fanuc Series 18i-T CNC Operator Panel","description":"\u003cp\u003eUsed in CNC turning and rotating part applications, the GE Fanuc Series 18i-T is a mid-range lathe CNC control console covering a wide range of high-production and job shop environments. The unit is a complete operator panel assembly featuring an integrated CRT display, full MDI keyboard with alphanumeric and function keys, machine operator panel with cycle start, feed hold, emergency stop, and mode selector controls, as well as feedrate override and spindle speed override rotary switches. A yellow label on the display bezel confirms the Series 18i-T designation. The assembly is crated in a wood shipping enclosure visible in the photos. The Series 18i-T supports up to two-path turning control, high-speed PMC, and synchronous spindle functions. It is compatible with CNC lathes and turning centers originally equipped with GE Fanuc 18i-T controls. The panel includes an emergency stop mushroom button and separate green cycle-start and red feed-hold buttons. A dual-head selector switch labeled \"Head 1 \/ Head 2\" is visible at the upper right of the console, consistent with two-spindle lathe configurations. This assembly is sold as removed from a machine and is not represented as tested or verified operational.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-621\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":48885709734128,"sku":"m00621","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/20C16184-CB42-42BD-9DB8-C63B928E8721.png?v=1784140932"},{"product_id":"ge-fanuc-ac-servo-motor-a06b-0314-b0017000-1-kw-2000-rpm-0226-589","title":"GE Fanuc A06B-0314-B001#7000 AC Servo Motor 1 kW 2000 RPM","description":"\u003cp\u003eUsed in CNC machining centers and automated machine tool applications, the GE Fanuc AC Servo Motor Model 5S carries part number A06B-0314-B001#7000 and was manufactured in Japan. The nameplate confirms 3-phase operation, 8 poles, 126V, a stall current of 5.8A, stall torque of 5.9 Nm, and a rated speed of 2000 RPM. Insulation is Class F, rated for ambient temperatures up to 40°C. Excitation is via permanent magnet. The motor is equipped with a pulse coder feedback device for closed-loop position and velocity control, making it compatible with Fanuc Series 0, Series 6, Series 10, Series 11, and Series 15 CNC systems that use the A06B-0314 motor series. Serial number C913C2935 and date code 91 03 are legible on the nameplate. The output shaft has a spur gear installed as visible in the photos. The motor features a square flange mount with four-bolt pattern and dual conduit entry ports on the rear. This unit is offered as surplus industrial equipment.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-589\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":48885790605552,"sku":"m00589","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/14870AA9-DD15-42F6-A015-ECCB3E88E678.png?v=1784135214"},{"product_id":"ge-fanuc-fanuc-ltd-cnc-control-panel-a02b-0309-b522-24v-dc-0226-644","title":"GE Fanuc A02B-0309-B522 CNC Control Panel 24V DC","description":"\u003cp\u003eUsed in CNC turning centers and lathes, this is a complete GE Fanuc Series 0i-TC operator panel assembly comprising the Fanuc CNC control unit, 8.4-inch LCD display, MDI keyboard, and a full lathe machine panel with operator controls. The CNC control unit carries type number A02B-0309-B522, manufactured by Fanuc Ltd in Japan in July 2007 with serial number E077B5038. A GE Fanuc CNC Express reconfiguration label identifies the unit as 0iTC-MCU63285-001R00. The panel assembly includes a lathe-specific operator panel with feedrate, spindle speed, and traverse override rotary controls, cycle start and feed hold pushbuttons, an emergency stop button, a Fanuc MPG handwheel, and additional machine-specific selector switches labeled for chuck, quill, and toolstock functions. The MDI keyboard section features the full alphanumeric and function key layout standard to the Fanuc Series 0i-TC turning center control. The display area shows the GE Fanuc Series 0i-TC label on the front bezel. The entire assembly is mounted on a steel plate with a teal green frame and is removed as a complete operator station unit. The Fanuc Series 0i-TC is a turning center variant of the Series 0i control platform, providing up to 4 programmable axes with over 200 standard CNC features including canned cycles, tool life management, and rigid tapping. MPN A02B-0309-B522 is the OEM identifier used in active US market listings for this control unit.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-644\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":48890762100976,"sku":"m00644","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/EBD58F03-3B43-4B97-8E0B-99F6A910614D.png?v=1784209920"},{"product_id":"fanuc-ge-fanuc-ac-servo-motor-a06b-0151-b0757008-3-kw-1200-rpm-0226-768","title":"GE Fanuc A06B-0151-B075#7008 AC Servo Motor 3 kW 1200 RPM","description":"\u003cp\u003eThe Fanuc Alpha series A06B-0151-B075#7008 is a three-phase AC servo motor rated at 3.3 kW continuous output at 1200 RPM. Manufactured by Fanuc Ltd in Yamanashi, Japan, this motor carries model designation Alpha 30\/1200 and was produced under motor spec A06B-0151-B075#7008. The nameplate lists an input voltage of 191 V AC, a current draw of 11 A, and an operating frequency of 80 Hz. Permanent magnet field voltage is rated at 200 V inverter. Stall torque is 30 Nm at a stall current of 13 A. Winding connection is wye (Y) configuration with Class F insulation. The motor is equipped with two rear-mounted connectors: one for the A64 pulse encoder and one for power, consistent with the #7008 suffix designation indicating a straight keyed shaft configuration. The motor body is constructed of cast aluminum with a square flange mounting face and a cylindrical output shaft. This unit is compatible with Fanuc Alpha series servo amplifiers and is commonly found in CNC machine tool axis and spindle applications. Serial number C996A2250 is visible on the nameplate, with a manufacturing date of June 1999. The manual reference number listed is B-65142E.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-768\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":48916824490224,"sku":"m00768","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/EC8262E4-6B91-4916-B20D-3C7412DED326.jpg?v=1784659266"},{"product_id":"ge-fanuc-ac-servo-motor-a06b-0158-b0757008-6-kw-2000-rpm-0226-769","title":"GE Fanuc A06B-0158-B075#7008 AC Servo Motor 6 kW 2000 RPM","description":"\u003cp\u003eUsed in CNC machining centers and large-format machine tools, the GE Fanuc Alpha 40\/2000 AC servo motor carries part number A06B-0158-B075#7008 and is part of the red cap 0158 Alpha series. Rated at 7.3 kW continuous output, this motor operates on a three-phase 184V inverter supply at 133 Hz with a maximum speed of 2000 RPM and a stall torque of 56 Nm. Current draw is rated at 25 amps. The nameplate confirms IEC 34-1\/A2:1989 compliance, Class F insulation, and a permanent magnet field configuration. Two radial cooling fans are mounted in series on the front face, which is characteristic of the 0158 Alpha fan-motor series. The shaft is a straight keyed configuration as indicated by the #7008 suffix, with no holding brake. A FANUC Alpha A64 pulsecoder is mounted on the rear of the motor for position and velocity feedback, making this unit compatible with FANUC axis drive modules in the A06B-6079-H1xx and A06B-6096-H1xx families. The serial number is C98YG0875 and the manufacture date is September 2005. This motor is commonly used as a direct replacement for other A06B-0158-B075 variants on horizontal and vertical machining centers equipped with FANUC CNC systems.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-769\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":48916842316016,"sku":"m00769","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/CB040F8A-1071-4C28-90ED-DC6D3B4518DB.png?v=1784659235"},{"product_id":"ge-fanuc-a06b-0123-b575-7008-servo-motor-c94c1952","title":"GE Fanuc A06B-0123-B575#7008 AC Servo Motor 1 HP 3000 RPM","description":"\u003cp\u003eThe GE Fanuc A06B-0123-B575#7008 is an AC servo motor from the Alpha series, model designation α3\/3000. Rated at 0.9 kW continuous output (approximately 1.2 HP), this 3 phase permanent magnet motor operates at 127 volts, 4.6 amps, and 200 Hz, with a rated speed of 3000 RPM and a stall torque of 3 Nm. Insulation class is F, and the motor is built with IEC 34 compliance. Manufactured in Japan, the unit carries serial number C946C1952 with a date code of 94 06. The #7008 suffix identifies this configuration within the broader A06B-0123-B575 family used in CNC and industrial automation feedback systems. Compatible with Fanuc Series 0, 15, 16, 18, 20, and 21 CNC controls when paired with the appropriate alpha servo amplifier, this motor is commonly installed on machining centers, turning centers, and similar production equipment requiring closed loop position control. The integrated pulse coder provides position feedback for the drive system. Construction is sealed for industrial environments, with a published housing weight of approximately 8 kilograms for the bare motor. This MPN has been discontinued by the manufacturer and is sourced primarily through the surplus and refurbishment market. Buyers should verify compatibility with the target amplifier model and confirm shaft, encoder, and connector configuration against application requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-095\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494485860592,"sku":"m00095","price":1024.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6507.png?v=1783436605"},{"product_id":"ge-fanuc-a06b-0158-b075-7008-ac-motor-c975g0683","title":"GE Fanuc A06B-0158-B075#7008 AC Servo Motor 10 HP 2000 RPM","description":"\u003cp\u003eThe GE Fanuc A06B-0158-B075#7008 is an AC Servo Motor from the Alpha series, model designation a40\/2000. Nameplate data confirms a continuous rating of 7.3 kW, 184 V, 25 A, 133 Hz, three phase, with a maximum speed of 2000 RPM and a continuous stall torque of 55 Nm. Insulation is Class F and the motor is configured with permanent magnet field excitation. The unit is built for use in CNC machining centers and machine tool feed axis applications, paired with Fanuc Alpha series servo amplifiers such as the A06B-6079-H1xx and A06B-6096-H1xx drive families. The #7008 suffix designates the standard configuration with twin radial cooling fans mounted on the front housing and an A64 absolute pulse coder mounted on the rear. The motor features a straight keyed shaft and a flanged mounting interface. Manual part number 8 65140X is stamped on the nameplate. Manufactured by Fanuc Ltd. in Yamanashi, Japan, with a date code of 97.05. Compatible with the wider Fanuc Alpha CNC platform used on small to medium machining centers, turning centers, and similar machine tools. Suitable as a direct replacement or core exchange unit for the A06B-0158-B075 family, including the #0008 and #7008 variants. CE marked per the original manufacturer plate. Approximate shipping dimensions reflect a heavy cast iron and steel construction with twin top mounted cooling fans and rear pulse coder housing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-097\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494485893360,"sku":"m00097","price":2413.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1357.png?v=1783454376"},{"product_id":"fanuc-a06b-0158-b075-7008-servo-motor-020306-fan","title":"GE Fanuc A06B-0158-B075#7008 AC Servo Motor 5 HP 2000 RPM","description":"\u003cp\u003eThe GE Fanuc A06B-0158-B075#7008 is an AC servo motor from the Alpha 40\/2000 series, manufactured in Yamanashi, Japan with a nameplate date of 2002.11. Manual part number B-65142E. Serial number C02YG0022. This motor is rated for 7.3 kW continuous output, 184 V at 3 phase winding connection, 25 A, 133 Hz, with a maximum speed of 2000 min⁻¹. Stall torque is rated at 56 Nm with a 10 A stall current at 200 V inverter input. Insulation class is F. The motor uses permanent magnet field construction and carries CE marking with TÜV Rheinland certification per IEC34 1\/A2:1989. The Alpha 40\/2000 frame is commonly fitted to small and medium machine tools driven by Fanuc A06B 6079 H1xx and A06B 6096 H1xx series axis drives, and is typically equipped with an Alpha pulse coder for absolute position feedback. The motor features a keyed straight shaft and twin radial cooling fans mounted on the front housing. Applications include CNC milling centers, machining centers, and turning centers where high torque AC servo motors are required for spindle or feed axis control. The unit ships as pictured. Specifications listed above are sourced from the visible nameplate data and Fanuc published documentation for the A06B-0158-B075 series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-102\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494486057200,"sku":"m00102","price":2636.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6527.png?v=1783490975"},{"product_id":"fanuc-a06b-0158-b075-7008-servo-motor-2636-12826-fan","title":"GE Fanuc A06B-0858-B075#7000 AC Spindle Motor 10 HP 1500 RPM","description":"\u003cp\u003eThe GE Fanuc A06B-0858-B075#7000 is an AC spindle motor from the Fanuc Alpha series, model designation 040\/2000 (Alpha 18). This three phase induction motor is rated at 7.3 kW continuous output, 184 volts, 133 Hz, with Class F insulation. The motor utilizes the A18 frame size with foot mount construction and a keyed cylindrical output shaft. A position feedback sensor is integrated at the rear of the motor for closed loop spindle control, accessed through a separate sensor connector housing. The main power terminal box is mounted to the rear of the stator housing for three phase power connection. This motor is commonly used as a main spindle drive in CNC machining centers, turning centers, and grinding machines that operate with Fanuc spindle amplifier modules and Fanuc CNC controls. The A06B-0858 series is part of the Alpha (α) spindle motor family designed to provide constant power across a wide speed range with rapid acceleration and deceleration characteristics. Compatible drive systems include Fanuc Series 0, 15, 16, 18, 20, 21, and Power Mate controls when paired with the appropriate spindle amplifier module from the A06B-6078, A06B-6088, or A06B-6102 series. Specification A06B-0858-B075#7000 indicates the foot mount configuration with key on the front shaft and the standard sensor option. Serial number C975G0055 is recorded on the nameplate. Sold as removed surplus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-103\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494486089968,"sku":"m00103","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6531.png?v=1783490775"},{"product_id":"ge-fanuc-a06b-0514-b674-7008-servo-motor-c9z2c2014","title":"GE Fanuc A06B-0514-B674#7008 AC Servo Motor 2.5 HP 3000 RPM","description":"\u003cp\u003eThe GE Fanuc A06B-0514-B674#7008 is an AC servo motor from the Fanuc 5S\/3000 series, manufactured in Japan with a date code of 92.12 and serial number C92ZC2014. The nameplate identifies a 3 phase, 8 pole configuration rated at 107 volts with a stall current of 10.2 amps and stall torque of 5.9 Nm. Maximum speed is rated at 3000 RPM. Insulation is Class F with an ambient temperature rating of 40 degrees C. Excitation is by permanent magnet, and the unit is equipped with an integrated pulse coder for position feedback. The #7008 suffix designates a straight shaft with keyway, holding brake, and Fanuc Serial C pulse coder configuration. This motor is part of the Fanuc S series of AC servo motors used in legacy CNC machining centers, turning centers, and industrial automation systems where Fanuc control architecture is present. Typical applications include axis drives on Fanuc System 0, 6, 10, 11, 15, and 16 era control platforms paired with compatible Fanuc S series servo amplifiers. The 5S\/3000 designation refers to a 5 Nm class motor with a 3000 RPM rated speed. The integrated holding brake provides axis retention when power is removed. Mounting follows standard Fanuc flange dimensions for the A06B-0514 frame size. The full Fanuc nomenclature for this configuration is A06B-0514-B674#7008, also referenced as A06B0514B6747008.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-106\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494486155504,"sku":"m00106","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6543.png?v=1783491396"},{"product_id":"ge-fanuc-a06b-0514-b574-7008-servo-motor-c928c3386","title":"GE Fanuc A06B-0514-B574#7008 AC Servo Motor 2.5 HP 3000 RPM Model 5S\/3000","description":"\u003cp\u003eThe GE Fanuc A06B-0514-B574#7008 is an AC servo motor from the Fanuc 5S\/3000 series, identified by the nameplate as Model 5S\/3000. The unit operates at 107 V, three phase, with eight poles and a rated speed of 3,000 RPM. Stall torque is listed at 5.9 Nm and stall current at 10.2 A. Insulation is Class F, with an ambient temperature rating of 40 °C. Excitation is by permanent magnet, and the motor integrates a pulse coder for position feedback to the servo drive. Serial number C928C3386 is present on the nameplate, with a date code of 92 08. The motor is built in Japan.\u003c\/p\u003e\n\u003cp\u003eThis servo is commonly used as a feed axis motor on Fanuc controlled CNC lathes, machining centers, and other automation equipment that pair with Fanuc Serial C compatible servo amplifiers. The straight shaft with key configuration allows direct coupling to ball screws, gear reducers, or belt drives in machine tool applications. The compact frame and permanent magnet construction support precise positioning in feed axis service.\u003c\/p\u003e\n\u003cp\u003eConfirmed nameplate data includes Model 5S\/3000, Type A06B-0514-B574#7008, 107 V input, 3 phase, 8 poles, 3,000 RPM, 5.9 Nm stall torque, 10.2 A stall current, Class F insulation, 40 °C ambient, permanent magnet excitation, and pulse coder feedback. The Fanuc Type designation A06B-0514-B574#7008 is the OEM part number used for replacement and cross referencing on Fanuc CNC and servo drive systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-107\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494486188272,"sku":"m00107","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6546.png?v=1783491263"},{"product_id":"ge-fanuc-a06b-0128-b575-7008-servo-motor-c998c7387","title":"GE Fanuc A06B-0128-B575#7008 AC Servo Motor 2 kW 3000 RPM","description":"\u003cp data-start=\"156\" data-end=\"207\"\u003eThe GE Fanuc A06B-0128-B575#7008 is an AC servo motor from the Alpha 6\/3000 series, manufactured by Fanuc Ltd. in Yamanashi, Japan. The nameplate identifies the unit as Model A6\/3000 with motor specification A06B-0128-B575#7008 and serial number C998C7387, with a date code of 99.08. Rated output is 1.4 kW continuous, with a rated voltage of 114 V, rated current of 7.5 A, and a frequency of 200 Hz. Maximum speed is 3,000 rpm. The motor operates on 3 phase power with a star (Y) winding connection and is designed for use with a 200 V inverter. Insulation class is F, and the unit features a permanent magnet field design. Stall torque is rated at 6 Nm with a stall current of 10 A. The motor is compliant with IEC34 1\/A2:1989 and carries the CE and TUV Rheinland marks. The manual part number listed on the nameplate is B 65142E. This Alpha series motor is fitted with an A64 absolute encoder and a straight keyed shaft, and is commonly used in CNC machining centers and lathes including Hardinge QC and Quest Twin platforms. Equivalent OEM references include A06B0128B575, A06B 0128 B575, and variant suffixes #0008, #7000, #7076, and #F008 within the same product series. Buyers should verify compatibility with the controlling Fanuc servo amplifier and CNC system before installation.\u003c\/p\u003e\n\u003cp data-start=\"1067\" data-end=\"1323\"\u003e\u003cstrong\u003eStock # 0226-108\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494486221040,"sku":"m00108","price":1895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6549.png?v=1783492208"},{"product_id":"ge-fanuc-cnc-express-main-control-board-assembly-0tc-mcu15308-001r00","title":"GE Fanuc 0TC-MCU15308-001R00 CNC Express Main Control Board Assembly","description":"\u003cp\u003eThis listing is for a GE Fanuc CNC Express main control board assembly, part number 0TC-MCU15308-001R00, serial number 3200008274. The assembly consists of a multi-board CPU and I\/O backplane stack mounted in a gold-anodized aluminum card cage, manufactured by Fanuc in Japan. The integrated power supply module is identified by board number A16B-1212-0950 and provides AC input at 200 to 240V with DC outputs of +24V at 1A and +24V at 2A. Fuse positions F3 and F4 are rated 125V 5A. Status indicators for PIL, ALM, and CP4 are visible on the power supply faceplate. The CPU board carries silkscreen designation A16B-2201 and is populated with multiple EPROM, RAM, and logic IC packages. The assembly includes multiple connector positions labeled for axis and I\/O interconnects. The unit carries TUV Rheinland Bauart Gepruft and CE EMC certifications. This assembly is a core control component for GE Fanuc CNC Express equipped machine tools. Buyers should verify compatibility with their specific machine model and control configuration prior to purchase.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-297\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494489039088,"sku":"m00297","price":989.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/s-l1600_a8b58444-01a9-433a-a3a7-ed5222f1f1d1.png?v=1783612941"},{"product_id":"ge-fanuc-cnc-control-board-assembly-a02b-0098-b511","title":"GE Fanuc A02B-0098-B511 CNC Control Board Assembly","description":"\u003cp\u003eThis listing is for a GE Fanuc 0-TC CNC control board assembly, type A02B-0098-B511, serial number 3000003627, manufactured by GE Fanuc in Charlottesville, VA. The assembly consists of a multi-board backplane card cage in a gold-anodized aluminum frame with an integrated power supply module. The power supply faceplate shows AC input at 200 to 240V, AC output at 200 to 240V at 2.5A maximum, and DC control output connectors CP2 and CP3. Status indicators for PIL and ALM are present on the power supply panel. The primary CPU board carries the Fanuc board number A16B-1212-021 and is populated with EPROM, RAM, and logic devices including date-coded mask ROM chips. The backplane provides multiple connector positions for axis drive and I\/O interconnects. This assembly is the main control unit for the Fanuc 0-TC CNC turning center control system and is a direct replacement or spare for machine tools equipped with the Fanuc 0-TC control. Buyers should verify software version compatibility, connector configuration, and machine-specific parameter requirements prior to purchase.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-298\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494489137392,"sku":"m00298","price":759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/s-l1600_4_fafbff12-95d0-4c1c-814c-d0af5a24b9b7.png?v=1783612699"},{"product_id":"ge-fanuc-axp02-axis-processor-board-assembly-44a719325-102","title":"GE Fanuc 44A719325-102 AXP02 Axis Processor Board Assembly","description":"\u003cp\u003eThis listing is for a GE Fanuc AXP02 Axis Processor board assembly bearing part number 44A719325-102, Revision R01, fabrication number 44A719236-002. The main carrier board is silkscreened AXS02 MRX61 with fabrication number 44A719259-001, Revision R02\/2, dated March 1984. Three AXP02 Axis Processor daughter cards are mounted on the main carrier board, each bearing the GE logo and VA-4 2684 designation. A separate AXP03 Front End daughter card labeled 44A719325-101 is also visible mounted on the assembly. A handwritten label reading CNC 3 is affixed to the carrier board.\u003c\/p\u003e\n\n\u003cp\u003eKey onboard components include Intel P8032AH microcontrollers, Zilog Z80 series processors, 74LS373NA octal latch ICs made in the USA, C70540-18 gate array devices, and 356M3 labeled memory or logic devices. The assembly represents a multi-axis processor platform used within the GE Fanuc CNC control architecture for coordinating servo axis motion and interpolation functions.\u003c\/p\u003e\n\n\u003cp\u003eThis assembly is suited for use as a replacement or spare in compatible GE Fanuc CNC control systems utilizing the AXS02 MRX61 axis controller platform. Compatibility should be verified against OEM documentation and the specific machine control configuration prior to installation. Unit is offered as removed and has not been tested or recertified.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-428\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494494019824,"sku":"m00428","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/428.webp?v=1775161290"},{"product_id":"ge-fanuc-i-o-module-a03b-0807-c160-30v-dc-250v-ac","title":"GE Fanuc A03B-0807-C160 Relay Output Module 30V DC \/ 250V AC","description":"\u003cp\u003eThis listing is for a GE Fanuc AOR08G I\/O Model A relay output module bearing part number A03B-0807-C160, serial number 5675236, date code 944. The unit is manufactured in the USA and is identified on the nameplate as an 8-point relay output module rated for 30V DC and 250V AC switching.\u003c\/p\u003e\n\n\u003cp\u003eThe AOR08G designation identifies this as an 8-channel relay output module within the Fanuc I\/O Model A platform. This module provides discrete relay output capability for controlling AC and DC loads including solenoids, contactors, indicators, and other field devices under CNC or PLC program control. The 8-point configuration makes this module appropriate for applications requiring a smaller output count than the 16-point AOR16G variant.\u003c\/p\u003e\n\n\u003cp\u003eGE Fanuc was a joint venture between General Electric and Fanuc Ltd, producing CNC controls, servo systems, and programmable automation controllers widely used in North American machine tool and industrial automation applications. This module is suited for use as a replacement or spare in compatible GE Fanuc Series 0 and I\/O Model A control systems. Compatibility should be verified against OEM documentation and the specific machine I\/O configuration prior to installation. Unit is offered as removed and has not been tested or recertified.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-464\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494496149744,"sku":"m00464","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/464.png?v=1783959096"},{"product_id":"ge-fanuc-i-o-module-model-a-relay-output-module-a03b-0807-c160-30v-dc-250v-ac","title":"GE Fanuc A03B-0807-C160 Relay Output Module 30V DC \/ 250V AC Model A","description":"\u003cp\u003eThis listing is for a GE Fanuc AOR08G I\/O Model A relay output module bearing part number A03B-0807-C160, serial number 5675428, date code 944. The unit is manufactured in the USA by GE Fanuc.\u003c\/p\u003e\n\n\u003cp\u003eThe AOR08G designation identifies this as an 8-point relay output module within the Fanuc I\/O Model A platform, rated for switching loads at 30V DC and 250V AC. This module provides discrete relay output capability for controlling AC and DC loads including solenoids, contactors, indicators, and other field devices under CNC or PLC program control. The 8-point configuration is appropriate for applications requiring a smaller output channel count than the 16-point AOR16G variant.\u003c\/p\u003e\n\n\u003cp\u003eGE Fanuc was a joint venture between General Electric and Fanuc Ltd, producing CNC controls, servo systems, and programmable automation controllers widely used in North American machine tool and industrial automation applications. This module is suited for use as a replacement or spare in compatible GE Fanuc Series 0 and I\/O Model A control systems. Compatibility should be verified against OEM documentation and the specific machine I\/O configuration prior to installation. Unit is offered as removed and has not been tested or recertified.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-468\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49494496313584,"sku":"m00468","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/468.png?v=1783959339"},{"product_id":"ge-fanuc-cnc-rotary-positioner-headstock-series-18i-t-01376","title":"GE Fanuc Series 18i-T CNC Rotary Positioner Headstock 48 in 4-Jaw Chuck","description":"\u003cdiv class=\"product-specifications\"\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e GE Fanuc Series 18i-T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e CNC Rotary Positioner Headstock with Control Cabinet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFaceplate Diameter:\u003c\/strong\u003e Approximately 48 in (tape measured)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChuck Configuration:\u003c\/strong\u003e 4-jaw independent, T-slotted faceplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle:\u003c\/strong\u003e Through-bore, large circular bolt pattern on the rear of the casting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator Controls:\u003c\/strong\u003e Alphanumeric MDI keyboard, machine function keypad, emergency stop, CNC ON \/ CNC OFF, PRG EDIT keyswitch, Fanuc feedrate override dial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Accumulator:\u003c\/strong\u003e Parker A4N0231D1KGRG, serial 769257-003-001, 231 cu in, 3,000 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic Power Unit:\u003c\/strong\u003e Bucher Hydraulics (Grand Rapids, MI), electric motor driven, mounted to the cabinet base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Transformer:\u003c\/strong\u003e Beaver Electrical Machinery Ltd. B6HM, serial A 0492, 6.0 kVA, 3-phase, 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer Voltage:\u003c\/strong\u003e HV 480V delta (H1-H2-H3), LV 208Y\/120V (X0-X1-X2-X3), taps at 105%, 100% and 95%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer Detail:\u003c\/strong\u003e Type ANN, enclosure CSA-2, 8.5% impedance, insulation class 220, 150°C temperature rise, 170°C AT, 105 lb, CSA LR34493\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Interface:\u003c\/strong\u003e EPIC heavy-duty rectangular connectors, connector pocket labelled URT2-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Anaconda Sealtite flexible conduit throughout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet:\u003c\/strong\u003e Freestanding steel enclosure on a wheeled base with leveling feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Surplus - Untested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"seo-product-description\"\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThis CNC rotary positioner headstock ships as a two-piece system: the headstock itself and a separate freestanding control cabinet, connected by a bundled cable and hose harness. It suits large-part turning, positioning and heavy industrial machining where a programmable rotary axis is needed.\u003c\/p\u003e\n\u003cp\u003eThe headstock carries a T-slotted faceplate measuring approximately 48 in across by tape, in a 4-jaw independent configuration with adjustable clamp blocks. The rear of the casting shows a large circular bolt pattern consistent with a through-bore spindle mount, and the housing carries a lifting eye rated for the assembly.\u003c\/p\u003e\n\u003cp\u003eControl is by a GE Fanuc Series 18i-T with a full alphanumeric MDI keyboard, a machine function keypad, emergency stop, CNC ON and CNC OFF pushbuttons, a program edit keyswitch and a Fanuc feedrate override dial. The cabinet sits on a wheeled base with leveling feet.\u003c\/p\u003e\n\u003cp\u003eHydraulics are supplied by a Bucher Hydraulics power unit mounted to the cabinet base and driven by an electric motor, with a Parker accumulator model A4N0231D1KGRG, serial 769257-003-001, rated 231 cubic inches at 3,000 PSI. Machine power is conditioned by a Beaver Electrical Machinery isolation transformer, catalog B6HM, serial A 0492, rated 6.0 kVA three phase at 60 Hz, 480V delta primary to 208Y\/120V secondary, with 105%, 100% and 95% taps, 8.5% impedance, class 220 insulation and a 150°C rise. The transformer is CSA certified under LR34493 and weighs 105 lb.\u003c\/p\u003e\n\u003cp\u003eMachine interface is through EPIC heavy-duty rectangular connectors, with one connector pocket on the headstock labelled URT2-1. Wiring runs in Anaconda Sealtite flexible conduit. No machine builder nameplate is present on the assembly, so the original OEM and the spindle bore dimension are not identified.\u003c\/p\u003e\n\u003cp\u003eSold as surplus, untested. Buyers should confirm the faceplate dimensions, the spindle bore, the control configuration and the required supply voltage against their application before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0426-01376\u003c\/strong\u003e\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":49571280748784,"sku":"m01376","price":18999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/7E0829E4-852F-49C6-B8C0-44F307D4E9F2_20260723193100099.png?v=1784835060"}],"url":"https:\/\/mroexchange.com\/collections\/ge-fanuc.oembed","provider":"MRO Exchange","version":"1.0","type":"link"}