{"title":"Gearboxes \u0026 Speed Reducers","description":"","products":[{"product_id":"sew-eurodrive-screw-conveyor-drive-gearbox-fa77-1-kw-0-rpm-0226-593","title":"SEW Eurodrive Screw Conveyor Drive Gearbox FA77 - 1 kW 0 RPM","description":"\u003cp\u003eA parallel helical offset gear unit from SEW Eurodrive, branded as the Snuggler, this size FA77 screw conveyor drive gearbox is part of the F-series line engineered for shaft-mounted conveyor drive applications. The Snuggler designation refers to SEW Eurodrive's compact parallel shaft helical offset gear unit configuration, which places the output shaft offset and parallel to the input, allowing the unit to mount close to the driven shaft without extended structure. The cast iron housing is painted in SEW Eurodrive's characteristic green finish. The unit features a hollow bore output flange on one face and a circular motor adapter plate on the opposite face, which accommodates a C-face motor mount. No motor is included. A lubrication fitting is visible at the top of the housing. The FA77 frame size positions this unit in the mid-capacity range of the F-series, with maximum output torque of 1,500 Nm per published SEW Eurodrive specifications for this frame (sourced from manufacturer published data, not visible nameplate). Gear ratio and full type number could not be confirmed from available photos. Compatible motor input adapters, shaft seals, and mounting hardware should be verified against the installed configuration. The unit is sold as a gear unit only.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-593\u003c\/p\u003e","brand":"SEW Eurodrive","offers":[{"title":"Default Title","offer_id":48885132689648,"sku":"m00593","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/55FB2ACB-076A-4516-9147-46DB57B7FEF8.jpg?v=1771869391"},{"product_id":"ohio-gear-worm-gear-reducer-with-motor-o-3-assembly-b-501-ratio-variable-0-rpm-0226-602","title":"Ohio Gear Worm Gear Reducer with Motor O-3, Assembly B, 50:1 Ratio - Variable 0 RPM","description":"\u003cp\u003eOhio Gear catalog number O-3 is a worm gear reducer assembled with an integral motor, manufactured by Ohio Gear, a division of Towmotor Corp. of Cleveland, Ohio. The unit carries serial number 775634 and is configured as Assembly B with a 50:1 reduction ratio. The cast iron gearbox housing is painted in the manufacturer's characteristic teal green and is base-mounted on a steel plate, allowing for straightforward installation in a variety of industrial drive applications. The output shaft is visible on the front face of the reducer, and a flexible jaw-type coupling connects the motor shaft to the gearbox input. An oil fill port is present on the top of the gearbox housing. The motor is directly coupled to the reducer and shares the same base plate, forming a compact gearmotor assembly suited for low-speed, high-torque drive requirements. Worm gear reducers with a 50:1 ratio are commonly used in conveyor systems, packaging equipment, agitators, and other machinery requiring significant speed reduction from a standard motor input. Motor horsepower and electrical specifications were not legible in the available photographs.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-602\u003c\/p\u003e","brand":"Ohio Gear","offers":[{"title":"Default Title","offer_id":48885441593584,"sku":"m00602","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/49777229-7BD9-4F8A-BC3D-AEDF486EB7AC.jpg?v=1771876235"},{"product_id":"atlanta-antriebssysteme-e-servo-worm-gear-reducer-59-04-020-0326-920","title":"Atlanta Antriebssysteme E-Servo Worm Gear Reducer 59 04 020","description":"\u003cp\u003eUsed in precision automation, CNC axis drives, and servo positioning systems, the Atlanta Antriebssysteme Type 59 04 020 is an E-series servo worm gear reducer manufactured in Germany. The nameplate confirms a gear ratio of 19.5:1, a maximum input speed of 4000 U\/min, and a unit weight of 11.5 kg. The serial number is 2996960002. This unit is an Atlanta Economy (E) series reducer, featuring a right-angle worm gear configuration with a hollow-bore output suitable for mounting pinion shafts, output shafts, or other drive elements. The E-series design incorporates input-side angular contact bearings for high-speed operation and output-side tapered roller bearings for high radial and axial load capacity. Angular backlash is rated at less than 5 arc-minutes. The housing is manufactured from aluminum alloy for efficient thermal dissipation and universal multi-face mounting. The nameplate also specifies Klubersynth GH 6-220 synthetic lubricant fill, which is not mixable with mineral oil. The unit is shown with its original packaging foam and includes the Atlanta installation and maintenance instruction booklet for the Type 59 E-servo worm gear unit. This size 59 frame represents the largest standard offering in the Atlanta E-series lineup, with a center distance of 100 mm, providing the highest torque capacity available in this series.\u003c\/p\u003e\n\u003cp\u003eStock # 0326-920 \u003c\/p\u003e","brand":"Atlanta Antriebssysteme","offers":[{"title":"Default Title","offer_id":48951522918640,"sku":"m00920","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/7B67628C-95D8-4993-9B26-491D612707C8.jpg?v=1772835484"},{"product_id":"grove-gear-worm-gear-reducer-sp1-hmq213-0326-864","title":"Grove Gear Worm Gear Reducer SP1 HMQ213","description":"\u003cp\u003eUsed in conveyor systems, packaging lines, and general industrial drive applications, the Grove Gear IronMan SP1 HMQ213 is a right angle single reduction worm gear reducer with a 10:1 ratio, rated at 0.733 input HP at 1750 RPM input speed under AGMA Class 1 service conditions. The catalog number is 8016047. The HMQ designation indicates a hollow bore output with motorized C-face quill input, suitable for direct motor mounting. The unit is lubricated with AGMA 7 gear oil per the nameplate specification. Manufactured in Union Grove, Wisconsin, USA, this IronMan series reducer features a cast iron housing construction consistent with the Grove Gear 800 series platform, which is known for its one-piece housing, bronze worm gear, and tapered roller output shaft bearings. The date code G\/10 is visible on the nameplate. Grove Gear IronMan reducers are a premium domestic product line and are widely used as direct replacements for industry-standard worm reducers across a broad range of right angle drive applications.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-864\u003c\/p\u003e","brand":"Grove Gear","offers":[{"title":"Default Title","offer_id":48969586245872,"sku":"m00864","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/A6086FE9-FD7A-46BF-906D-EF14459CE5E0.jpg?v=1773158013"},{"product_id":"grove-gear-worm-gear-reducer-gr-hmq-813-10-h1-d80cz-10-0326-865","title":"Grove Gear Worm Gear Reducer GR-HMQ-813-10-H1-D80CZ-10","description":"\u003cp\u003eUsed Grove Gear IRONMAN GR-HMQ-813-10-H1-D80CZ-10 (SP) worm gear reducer, catalog number GR8135546.00, manufactured by Regal Beloit Corporation in Union Grove, WI 53182. This right angle, single-reduction cast iron unit features a 10:1 gear ratio with a C-face quill input and hollow bore output shaft. Output torque is rated at 263 in-lbs with a maximum input of 0.823 HP at 1750 RPM with a 1.0 service factor. The unit is equipped with a D80CZ metric flange input configuration, a custom factory option denoted by the SP designation. Lubricated at the factory with Mobil Glygoyle GLY460 PAG synthetic lubricant. Date code D\/12. Grove Gear IRONMAN 800 Series reducers feature one-piece cast iron housings CNC machined for precise component alignment, tapered roller bearings on the output shaft, oversized high-speed bearings for frequent reversing and start\/stop duty, and FKM double lip seals. Mounting dimensions are interchangeable with Baldor 900 series, Boston Gear, Browning Raider, Falk, Morse Invader, and other industry standard reducers. Suitable for conveyors, material handling equipment, textile machinery, packaging machinery, and similar applications requiring high torque at reduced output speed.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-865\u003c\/p\u003e","brand":"Grove Gear","offers":[{"title":"Default Title","offer_id":48969601712368,"sku":"m00865","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/80D3EDD4-72C1-426D-B25D-F3287F1E346C.jpg?v=1773158160"},{"product_id":"grove-gear-worm-gear-reducer-hmq213-1-0326-866","title":"Grove Gear Worm Gear Reducer HMQ213-1","description":"\u003cp\u003eThe Grove Gear IronMan HMQ213-1 is a right-angle single-reduction worm gear reducer manufactured in Union Grove, Wisconsin. The nameplate confirms a 10:1 ratio, 0.735 input HP, and an AGMA Class 1 service rating at 1750 RPM input. Lubrication specification is AGMA 7 gear oil. The catalog number on the nameplate plate is 8016047, and the date code reads J\/11.\u003c\/p\u003e\n\n\u003cp\u003eThe HMQ213 belongs to the legacy IronMan 200 Series product line, featuring a cast iron housing, keyed hollow output bore, and a C-face input flange for direct motor attachment. The output shaft bore is visible on the side face with a keyway present. The unit is of right-angle configuration with worm-over-wheel geometry, consistent with the 200 Series design standard for this size class.\u003c\/p\u003e\n\n\u003cp\u003eAt a 10:1 ratio and 1750 RPM input, the output shaft turns at 175 RPM. This size and ratio combination is common in conveyor drives, packaging machinery, food processing equipment, and general industrial speed reduction applications requiring compact footprint and moderate torque output. Grove Gear IronMan reducers are interchangeable with many industry-standard mounting dimensions, making this unit compatible with a range of motor and machinery configurations. Made in the USA.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-866\u003c\/p\u003e","brand":"Grove Gear","offers":[{"title":"Default Title","offer_id":48969606168816,"sku":"m00866","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/A3800CFB-F158-4EC7-A231-014218519912.jpg?v=1773158360"},{"product_id":"boston-gear-worm-gear-speed-reducer-f713-5-b5-j-0326-874","title":"Boston Gear Worm Gear Speed Reducer F713-5-B5-J","description":"\u003cp\u003eUsed in conveyor systems, packaging equipment, and general industrial machinery, the Boston Gear F713-5-B5-J is a right angle worm gear speed reducer from the 700 Series product line, manufactured in the USA. The unit carries a catalog number of F713-5-B5-J and is rated at 1.39 HP input with an output torque of 235 lb-in. Gear ratio is 5:1 with a single reduction configuration. Ratings are published for 1.0 service factor at 1750 RPM input using Klubersynth UH1 6-460 lubricant. Input is via a 56C quill-style motor flange and output is through a solid projecting shaft on the right side, with a 0.625 in. output bore diameter and a center distance of 1.33 in. The cast iron housing is straddle-milled top and bottom for precise worm and gear alignment. The 700 Series design features a large internal oil reservoir for heat dissipation, internal baffles for leak-free venting, and super-finished oil-seal diameters on both input and output shafts. The worm gear is fabricated from high-strength bronze and is straddle mounted between tapered roller bearings to handle thrust and overhung loads. The unit supports multi-position mounting for flexible installation in virtually any orientation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-874\u003c\/p\u003e","brand":"Boston Gear","offers":[{"title":"Default Title","offer_id":48969653158128,"sku":"m00874","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/DC53BD97-5F6B-44A9-8F17-57A787E2B92B.jpg?v=1773159726"},{"product_id":"boston-gear-worm-gear-speed-reducer-f713-25kt-b5-g2-0326-875","title":"Boston Gear Worm Gear Speed Reducer F713-25KT-B5-G2","description":"\u003cp\u003eThe Boston Gear F713-25KT-B5-G2 is a right angle worm gear speed reducer from the 700 Series product line, rated at 0.43 HP input with a 25:1 reduction ratio. Output torque is 307 lb-in at a nominal output speed of 70 RPM when driven at 1,750 RPM input. The unit accepts a 56C C-face motor flange via quill-style input and delivers power through a left-side solid output shaft. The KT designation indicates a stainless steel output shaft, making this variant suited for applications requiring corrosion resistance at the output connection. Center distance is 1.33 in. with a 5\/8 in. output shaft diameter. The housing is fabricated from fine-grained, gear-quality cast iron and is straddle-milled top and bottom for precise alignment. Internal baffles provide positive, leak-free venting. Ratings are based on a 1.0 service factor at 1,750 RPM using Klubersynth UH1.6-460 lubricant, as indicated on the nameplate. The unit is manufactured in the USA, as cast into the housing. Boston Gear is a brand of Altra Industrial Motion. This is a single-reduction unit with multi-position mounting flexibility.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-875\u003c\/p\u003e","brand":"Boston Gear","offers":[{"title":"Default Title","offer_id":48969655353584,"sku":"m00875","price":569.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/D25D65DC-9F49-4B41-9D27-F7F3F211742D.jpg?v=1773159915"},{"product_id":"boston-gear-worm-gear-speed-reducer-f713-40-b5-j-0326-876","title":"Boston Gear Worm Gear Speed Reducer F713-40-B5-J","description":"\u003cp\u003eUsed in conveyor systems, packaging equipment, and general industrial machinery, the Boston Gear F713-5-B5-J is a right angle worm gear speed reducer from the 700 Series product line, manufactured in the USA. The unit carries a catalog number of F713-5-B5-J and is rated at 1.39 HP input with an output torque of 235 lb-in. Gear ratio is 5:1 with a single reduction configuration. Ratings are published for 1.0 service factor at 1750 RPM input using Klubersynth UH1 6-460 lubricant. Input is via a 56C quill-style motor flange and output is through a solid projecting shaft on the right side, with a 0.625 in. output bore diameter and a center distance of 1.33 in. The cast iron housing is straddle-milled top and bottom for precise worm and gear alignment. The 700 Series design features a large internal oil reservoir for heat dissipation, internal baffles for leak-free venting, and super-finished oil-seal diameters on both input and output shafts. The worm gear is fabricated from high-strength bronze and is straddle mounted between tapered roller bearings to handle thrust and overhung loads. The unit supports multi-position mounting for flexible installation in virtually any orientation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-876\u003c\/p\u003e","brand":"Boston Gear","offers":[{"title":"Default Title","offer_id":48969669116144,"sku":"m00876","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/795CCBF9-7C77-4712-86FB-FA9FF23592F6.jpg?v=1773160357"},{"product_id":"sumitomo-drive-technologies-cyclo-speed-reducer-cnhx-612hy-15-0326-892","title":"Sumitomo Drive Technologies Cyclo Speed Reducer CNHX-612HY-15 m00892","description":"\u003cp\u003eThe Sumitomo CNHX-612HY-15 is an SM-Cyclo 6000 Series inline cycloidal speed reducer manufactured by Sumitomo Machinery Corporation of America. The nameplate identifies part number PA067723, an input rating of 7.95 HP, 1750 input RPM, a 15:1 gear ratio, and a service factor of 1.0. The reducer belongs to Sumitomo's 612H frame size, a mid-to-large cast iron housing format well established in conveying, material handling, and general industrial drive applications. This is a standalone reducer without an integral motor, configured for NEMA C-face motor mounting via hollow input shaft. The output side presents a solid keyed shaft, visible in the provided photos along with a large flange mounting base. A Cyclo 6000 installation and quick-start guide is attached. The Cyclo mechanism achieves reduction through cycloidal disc action rather than involute tooth gearing, a design characterized by high shock load tolerance and compact reduction stages. Sumitomo cycloidal reducers in the 612H frame are widely used in aggregate, food processing, mining, and packaging equipment. Output shaft diameter and exact mounting dimensions were not confirmed from visible evidence and should be verified against Sumitomo Cyclo 6000 catalog data for frame 612H prior to installation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-892\u003c\/p\u003e","brand":"Sumitomo Drive Technologies","offers":[{"title":"Default Title","offer_id":48974929363184,"sku":"m00892","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/36E282B3-1822-44FD-9E67-9AC864C623B1.jpg?v=1773240760"},{"product_id":"sumitomo-drive-technologies-cyclo-speed-reducer-cnhx-612hy-15-0326-893","title":"Sumitomo Drive Technologies Cyclo Speed Reducer CNHX-612HY-15","description":"\u003cp\u003eThe Sumitomo CNHX-612HY-15 is an SM-Cyclo 6000 Series inline cycloidal speed reducer manufactured by Sumitomo Machinery Corporation of America. The nameplate identifies part number PA067723, an input rating of 7.95 HP, 1750 input RPM, a 15:1 gear ratio, and a service factor of 1.0. The reducer belongs to Sumitomo's 612H frame size, a mid-to-large cast iron housing format well established in conveying, material handling, and general industrial drive applications. This is a standalone reducer without an integral motor, configured for NEMA C-face motor mounting via hollow input shaft. The output side presents a solid keyed shaft, visible in the provided photos along with a large flange mounting base. A Cyclo 6000 installation and quick-start guide is attached. The Cyclo mechanism achieves reduction through cycloidal disc action rather than involute tooth gearing, a design characterized by high shock load tolerance and compact reduction stages. Sumitomo cycloidal reducers in the 612H frame are widely used in aggregate, food processing, mining, and packaging equipment. Output shaft diameter and exact mounting dimensions were not confirmed from visible evidence and should be verified against Sumitomo Cyclo 6000 catalog data for frame 612H prior to installation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-893\u003c\/p\u003e","brand":"Sumitomo Drive Technologies","offers":[{"title":"Default Title","offer_id":48974931329264,"sku":"m00893","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/24A86FF6-59DC-4E61-8F52-987A3FACD5BE.jpg?v=1773240838"},{"product_id":"br-automation-planetary-gearbox-8gp40-080-005s1j3-0326-1077","title":"B\u0026R Automation Planetary Gearbox 8GP40-080-005S1J3","description":"\u003cp\u003eA coaxial planetary gearbox from B\u0026amp;R Automation, part number 8GP40-080--005S1J3, size 080, gear ratio i = 5, single stage, IP54 protection rating. Manufactured in Germany, date code 19\/2020, revision A0. Serial number G1XA00005 as shown on the factory label. Configured for size 3 8LSA series servo motor interface per the J3 suffix designation. Based on published B\u0026amp;R 8GP40-080 single-stage specifications for this frame size, the output shaft is 20.0 mm diameter with a keyed DIN 6885 configuration. The 8GP40 series uses straight-toothed, fully hardened planetary gearing with honed sun and planet gears for high output torque and positioning precision. IP54 ingress protection provides resistance to dust and water splash. Item is new and in original B\u0026amp;R factory carton packaging. Carton label reads \"Getriebe Karton\" (gearbox carton) with a stated gross weight of 2.06 kg. The 8GP40 platform supports a building-block approach compatible with multiple output geometries. Country of manufacture: Germany. Compatible mating motor family: B\u0026amp;R 8LSA size 3 servo motors. No electrical components are included.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1077\u003c\/p\u003e","brand":"B\u0026R Automation","offers":[{"title":"Default Title","offer_id":48980000211184,"sku":"m01077","price":1995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/71FA279A-5476-4DE5-93DA-5FB5E6F4234C.jpg?v=1773350103"},{"product_id":"neugart-planetary-gearbox-ple-80-5op26-artnr-602-2354-0326-1078","title":"Neugart Planetary Gearbox PLE 80-5\/OP2+6 | Art.Nr. 602-2354","description":"\u003cp\u003eUsed in servo motor drive systems and precision automation equipment, the Neugart PLE 80-5\/OP2+6 is an 80 mm frame size planetary gearbox with a 5:1 reduction ratio. Neugart's PLE series is engineered for high torque density in a compact inline form factor, combining low-friction deep groove ball bearings with spur planetary gearing for efficient power transmission across demanding duty cycles. The unit carries IP54 protection and is rated across a wide operating temperature range of -25 degrees C to 90 degrees C with standard lubrication. Mounting is flexible in any orientation. The \"\/OP2+6\" suffix designates the output configuration, specifying a two-part motor adaptation flange and a clamping system bore of 6 mm, as confirmed by the Neugart nomenclature convention for this series. Article number 602-2354 and serial number 2009406 are confirmed on the box label, along with a customer reference number of 1122535. Country of manufacture is Germany. The unit is presented in the original Neugart corrugated box with plastic wrap intact on the gearbox body, consistent with new or new-surplus condition. Frame size 80 corresponds to the second-largest standard offering in the PLE range, providing nominal output torque up to 800 Nm depending on configuration. This gearbox is compatible with a broad range of servo and stepper motor flanges through Neugart's modular input adaptation system.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1078\u003c\/p\u003e","brand":"Neugart","offers":[{"title":"Default Title","offer_id":48981334786288,"sku":"m01078","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/F5E66ABA-56A3-4EEB-81A6-50CE05B3BDDF.jpg?v=1773408292"},{"product_id":"relex-ag-right-angle-planetary-gearbox-wple-60-art-nr-604-0486-0326-1079","title":"Relex AG Right Angle Planetary Gearbox WPLE 60, Art.-Nr. 604-0486","description":"\u003cp\u003eUsed in servo-driven automation and motion control systems, the Relex AG WPLE 60 is a right angle planetary gearbox manufactured in Jona, Switzerland (CH-8645). The nameplate identifies article number 604-0486, serial number 2000422, and a gear ratio of 1:5 (Untersetzung 1:5). The WPLE 60 series features a 60mm frame size with a bevel gear right angle output configuration, providing a 90-degree change in shaft orientation suited to space-constrained axis applications. Relex AG produced the WPLE line from the same Swiss facility later associated with Neugart, and these units share the same design architecture as the Neugart WPLE 60 economy right angle planetary series. The unit is wrapped in original protective plastic and housed in a corrugated shipping box with internal corrugated dunnage. Construction is aluminum housing with precision ground planetary gear stages. The 5:1 single-stage ratio positions this unit for moderate torque multiplication with high input speeds. No electrical components are present. Country of manufacture is Switzerland.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1079\u003c\/p\u003e","brand":"Relex AG","offers":[{"title":"Default Title","offer_id":48981340684528,"sku":"m01079","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/55F8E232-AEF5-444F-94A1-B88CA059ECDC.jpg?v=1773408884"},{"product_id":"br-automation-angular-planetary-gearbox-8ga40-060-005s1j2-0326-1089","title":"B\u0026R Automation Angular Planetary Gearbox 8GA40-060-005S1J2","description":"\u003cp\u003eUsed in precision servo drive systems and multi-axis automation, the B\u0026amp;R Automation 8GA40-060--005S1J2 is a single-stage angular (right angle 90-degree) planetary gearbox with a 5:1 gear ratio and 60mm frame size. Manufactured in Germany by Neugart under B\u0026amp;R article number 1143668, this unit carries an IP54 protection rating for resistance to dust and splash. The gearbox measures 147 x 85.5 x 60 mm per the factory shipping label and was date-coded 22.11.2018. The nameplate label visible through original plastic wrap confirms IP54 and the Neugart origin. This unit is new in original factory packaging with cardboard corner inserts, factory plastic wrap, and original corrugated outer box intact. The 8GA40 series from B\u0026amp;R is a standard-line angular planetary gearbox engineered for high input speeds and dynamic positioning applications including toothed belt drives, rack and pinion systems, and servo motor-coupled motion axes. Standard series 8GA gearboxes feature straight-toothed, fully hardened gearing with honed sun and planet gears for high output torque and precise positioning. Single-stage units in the 8GA40 series at ratio i=5 have backlash in the standard range of 8 to 15 arcmin. Country of manufacture: Germany.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1089\u003c\/p\u003e","brand":"B\u0026R Automation","offers":[{"title":"Default Title","offer_id":48981463695600,"sku":"m01089","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/3E48854D-5E9F-4D6C-BBF8-086A5D364E73.jpg?v=1773414489"},{"product_id":"wittenstein-alpha-hypoid-right-angle-servo-gearbox-actuator-assembly-tk-0255s-mf2-20-5e1-1s10-0326-1132","title":"Wittenstein Alpha Hypoid Right-Angle Servo Gearbox Actuator Assembly TK+ 0255S-MF2-20-5E1-1S10","description":"\u003cp\u003eUsed in precision automation and packaging machinery, this pre-assembled servo actuator combines a WITTENSTEIN alpha TK+ 0255S-MF2-20-5E1-1S10 hypoid right-angle gearbox with a B\u0026amp;R 8JSA44.EB040D200-0 synchronous servo motor in a single integrated unit. The gearbox carries WITTENSTEIN alpha material number 640442, serial number 6378982, and is lubricated with Optigear Synthetic 800\/100 as specified on the nameplate label. The TK+ series is WITTENSTEIN's hypoid right-angle line with TP+ compatible output geometry, taper roller bearings for combined axial and radial load absorption, and a hollow-shaft output flange visible at the output face.\u003c\/p\u003e\n\n\u003cp\u003eThe gearbox ratio is 20:1 as encoded in the type string. The assembly is configured with the motor axis at 90 degrees to the gearbox output axis, consistent with TK+ series right-angle design. The output flange shows a multi-bolt pattern with a through-bore hollow shaft. Serial number 6378982 appears on both the gearbox label and the assembly barcode label.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-1132\u003c\/p\u003e","brand":"Wittenstein Alpha","offers":[{"title":"Default Title","offer_id":49000665317616,"sku":"m01132","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/E27C89ED-6847-4E89-A284-03BF30629204.jpg?v=1773765946"},{"product_id":"item-915a","title":"Apex Dynamics Right Angle Planetary Gearbox AER070-020","description":"\u003cp\u003eUsed in servo-driven automation systems and precision motion control applications, the Apex Dynamics AER070-020 is a right angle planetary gearbox with a 20:1 reduction ratio and a 70mm flange frame size. The AER series features a 90-degree helical bevel input stage combined with a planetary reduction section, delivering a compact right angle configuration suited for applications where inline motor mounting is not possible. The nameplate confirms a backlash rating of 10 arcmin and the serial number 2504221355. According to Apex Dynamics published specifications, the AER070-020 is a 2-stage reduction unit with a nominal output torque of 40 Nm (29.5 ft-lbf), an efficiency rating of 92%, and an IP65 protection rating. The output shaft is a keyed design, and the input accepts a triple split collet for motor shaft engagement. The unit is compatible with NEMA 23 and NEMA 34 servo motor frames. Construction includes straddle-mounted high-precision bearings designed to support radial and axial loads, with synthetic lubrication oil for extended service life. The AER070-020 is manufactured by Apex Dynamics, Inc. in Taiwan and carries part number AER070-020, also cross-referenced in the market as AERO70-20.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-915\u003c\/p\u003e","brand":"Apex Dynamics","offers":[{"title":"Default Title","offer_id":49494503457008,"sku":"m00915","price":629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/5B5C0DDB-158E-49ED-9863-1D21DA9F0676.jpg?v=1775150911"}],"url":"https:\/\/mroexchange.com\/collections\/gearboxes-speed-reducers.oembed","provider":"MRO Exchange","version":"1.0","type":"link"}