{"title":"Motors","description":"","products":[{"product_id":"fanuc-a06b-0315-b001-7000-servo-motor-020226-fan","title":"GE Fanuc A06B-0315-B001#7000 AC Servo Motor 3 HP 2000 RPM","description":"\u003cp\u003eThe GE Fanuc A06B-0315-B001#7000 is an AC Servo Motor from the Model 10S S Series, manufactured in Japan and commonly used in CNC machining centers, lathes, and industrial automation systems. The nameplate identifies this unit as AC Servo Motor Model 10S, Type A06B-0315-B001-B001#7000, Serial No. 8000011524, Date 5\/91. Confirmed electrical and mechanical ratings include 12 Nm stall torque, 7.6 A stall current, 3 phase input, 8 poles, 2000 RPM rated speed, 150 V, Class F insulation, permanent magnet excitation, and 40 degrees C ambient rating. The B001#7000 specification indicates a straight shaft configuration with a 2000P incremental pulse coder for position feedback. This motor is widely deployed as an axis drive in legacy Fanuc CNC platforms and is compatible with corresponding Fanuc S Series servo amplifiers. The A06B-0315-B001 is listed as discontinued by the manufacturer, making surplus units the primary source for direct replacement in installed systems. Specifications referenced from manufacturer published data where not directly visible on the nameplate. Buyers should confirm compatibility with their existing drive, controller revision, and shaft, flange, and connector configuration prior to installation. Part number, serial number, and date code are documented above and visible in the listing photographs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStock # 0226-104\u003c\/strong\u003e\u003c\/p\u003e","brand":"Fanuc","offers":[{"title":"Default Title","offer_id":48797130555632,"sku":"m00104","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6536.jpg?v=1770386485"},{"product_id":"baldor-reliance-gearmotor-35w590-0085g3-1-hp-1800-rpm-stock-0226-110","title":"Baldor-Reliance Gearmotor 35W590-0085G3 - .5 HP 1800 RPM","description":"\u003cp\u003eA Baldor Reliance industrial AC gearmotor assembly consisting of a .5 HP three phase motor coupled to a right angle worm gear reducer. The Baldor motor carries catalog number 35W590 0085G3 with MPN 6P56H3884, rated for 208 to 230 \/ 460 VAC operation at 1725 RPM. Electrical specifications from the nameplate include 2.5 to 2.4 \/ 1.2 amps full load current, 60 Hz frequency, Class F insulation, and a 1.15 service factor. The motor is built on a 56Y NEMA frame with TEFC totally enclosed fan cooled enclosure, three phase wiring, and a top mounted conduit box. The motor is manufactured in Fort Smith, Arkansas. Bearings called out on the nameplate include 6203 on the drive end. Serial number F1811193559 is stamped on the nameplate. The worm gear reducer attached to the motor is a cast iron right angle unit with a bolt mounted output cover and a foot mounted base. The gearbox nameplate on this unit is covered by tape and is not legible from the available photos, so the gearbox manufacturer, ratio, and output torque cannot be confirmed without further inspection. Typical applications for assemblies of this size include conveyors, mixers, packaging equipment, indexing tables, and other low speed, moderate torque industrial drive applications. The unit is sold as a complete assembly with motor and gear reducer joined as shown.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-110\u003c\/p\u003e","brand":"Baldor-Reliance","offers":[{"title":"Default Title","offer_id":48819061719280,"sku":"m00110","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1367.jpg?v=1770825155"},{"product_id":"weg-ac-motor-00318ot3e182t-3-hp-1800-rpm-stock-0226-120","title":"WEG AC Motor 00318OT3E182T - 3 HP 1800 RPM","description":"\u003cp\u003eThe WEG 00318OT3E182T is a 3 HP, three phase, 60 Hz inverter duty AC motor in a 182T NEMA frame. Voltage is rated at 208\/230\/460 V, with a nameplate speed of 1765 RPM and a service factor of 1.15. The motor uses an open drip proof (ODP) enclosure rated IP21, with Class F insulation at an 80 K temperature rise and a 40 C ambient rating. Power factor is listed at 0.76, NEMA Design B, Code K, Type DT. The nameplate identifies the unit as suitable for use on VPWM variable frequency drives with a 10:1 variable torque and 2:1 constant torque turndown ratio. A 50 Hz rating of 9.44\/4.72 A at 1450 RPM is also indicated on the plate. The motor is NEMA Premium efficiency and carries CSA, UL (cUL), and CE markings. It is built in Brazil under WEG part identifier 10360048 and traceability codes 10209 17591 and 02SET13. Internal MOD code TO01C0X0N0000302084 appears below the model line. Typical applications for a 182T frame ODP three phase motor in this efficiency class include pumps, fans, blowers, conveyors, compressors, machine tool auxiliaries, and general purpose industrial drive trains where variable frequency drive operation is required.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-120\u003c\/p\u003e","brand":"WEG","offers":[{"title":"Default Title","offer_id":48819061752048,"sku":"m00120","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6576.jpg?v=1770825097"},{"product_id":"fanuc-servo-motor-a06b-0269-b200-0100-5-kw-3000-rpm-stock-0226-115","title":"FANUC Servo Motor A06B-0269-B200#0100 - 5 kW 3000 RPM","description":"\u003cp\u003eThe Fanuc A06B-0269-B200#0100 is an AC servo motor from the αiS (Alpha iS) 30\/4000HV series, manufactured by Fanuc Corporation in Yamanashi, Japan. The nameplate identifies model αiS 30\/4000HV with serial number C127V03DF and a manufacturing date of 2012.07. This motor is widely used in CNC machining centers, lathes, and industrial automation systems requiring high torque density and precise position control.\u003c\/p\u003e\n\u003cp\u003eRated specifications from the nameplate include a stall torque of 30 Nm at 16 A, continuous output of 5.5 kW at 9.3 A, and a rated speed of 3000 min⁻¹. The motor operates at 353 V with a frequency of 200 Hz, configured for 3 phases across 8 poles in a Y winding connection. Power factor is rated at 98 percent. The amplifier input range is 400 to 480 V at 50\/60 Hz. The unit carries an IP67 enclosure rating and an ambient temperature range of 0 to 40 degrees C. Insulation class is F per IEC60034 1. Manual reference is B 65262. Listed weight per the nameplate is 23 kg.\u003c\/p\u003e\n\u003cp\u003eThe αiS 30\/4000HV is compatible with Fanuc αi series servo amplifiers and is paired with Fanuc αiA1000 serial pulse coder feedback. The motor includes CE marking and TUV Rheinland certification. Typical applications include axis drives on Fanuc controlled machine tools where 5.5 kW continuous output and 3000 RPM rated speed are required.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-115\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48819061784816,"sku":"m00115","price":875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6561.jpg?v=1771354241"},{"product_id":"fanuc-servo-motor-a06b-0239-b200-0100-3-kw-3000-rpm-stock-0226-116","title":"FANUC AC Servo Motor A06B-0239-B200#0100 - 3 kW 3000 RPM","description":"\u003cp\u003eThe Fanuc A06B-0239-B200#0100 is an AC servo motor from the Alpha iS series, designated model aiS 12\/4000HV. Manufactured by Fanuc Corporation in Yamanashi, Japan, this high voltage servo motor is built for CNC machine tool and industrial automation applications requiring precise closed loop motion control. The nameplate confirms a continuous output rating of 2.5 kW with a stall torque of 12 Nm and a stall current of 6.7 A. Rated motor input is 336 V at 200 Hz with 4.5 A continuous current draw, configured as 3 phase, 8 pole, with a power factor of 99 percent. Maximum rated speed is 3000 min to the negative 1. Amplifier input range is 400 to 480 V at 50\/60 Hz. The motor carries an IP67 rating for protection against immersion, with insulation system class F. Ambient temperature range is 0 to 40 degrees C. Winding connection type is Y. The unit is fitted with a Fanuc Alpha iA1000 absolute pulse coder for high resolution position feedback. Manual reference number is B 65262, and the motor complies with IEC 60034 1. Nameplate weight is listed at 11.9 kg. Serial number C125W0A17 and date code 2012.05 are present on the rating plate. Marked CE and TUV Rheinland certified. Compatible with Fanuc Alpha i series servo amplifiers for high voltage spindle and feed axis drive applications on CNC lathes, machining centers, and multi axis production equipment. Discontinued OEM successor part references may apply.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-116\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48819061817584,"sku":"m00116","price":876.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6564.jpg?v=1771025551"},{"product_id":"gettys-servo-motor-16-0376-17-2-hp-3000-rpm-stock-0226-127","title":"Gettys Permanent Magnet DC Servo Motor 16-0376-17","description":"\u003cp\u003eThe Gettys 16-0376-17 is a permanent magnet field DC servo motor manufactured by Gettys B.V. Irish Branch in Dublin, Ireland (later acquired by Elwood Corporation). Per published manufacturer specifications, this unit is rated at 33 amps and 1000 RPM, placing it in approximately the 5 HP frame class with a unit weight of approximately 97 pounds. The nameplate identifies the type as 16-0376-17 with data sheet reference 201-113-3010, connection diameter 201-133-3049, and outline drawing BV-100IM-2. The serial number plate is partially obscured in available photographs. Gettys permanent magnet servo motors of this frame and vintage were widely deployed as axis drive motors in legacy CNC machining centers, lathes, grinders, and machine tool retrofits during the 1980s and 1990s, paired with Gettys, Gould, Allen Bradley, and other contemporary analog and PWM servo amplifiers. The 16-0376-17 model is officially discontinued by the manufacturer and is no longer in factory production, making surplus and refurbished units the primary source for end users maintaining installed legacy machinery. The frame construction is the standard Gettys cylindrical housing with foot or face mount provisions consistent with the BV-100IM-2 outline drawing. Suitable as a direct replacement or spare for installations originally specified with this exact part number, or for OEM cross reference applications where the published 201-113-3010 data sheet curve is required. Markings, serial numbers, and identifiers shown on the rating plate are documented as visible in the listing photographs.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-127\u003c\/p\u003e","brand":"Gettys","offers":[{"title":"Default Title","offer_id":48819061850352,"sku":"m00127","price":2200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6591.jpg?v=1770824925"},{"product_id":"fanuc-dc-motor-dc-servo-motor-model-005-variable-1657-rpm-stock-0226-130","title":"Fanuc DC Motor DC Servo Motor – A06B-0651-B005 - 2 kW 1500 RPM","description":"\u003cp\u003eThe Fanuc A06B-0651-B005 is a DC servo motor from the Model 10M series, designed for use in CNC machine tool axis drive applications. The nameplate identifies the unit as a permanent magnet DC servo motor manufactured by Fanuc Ltd., with rated armature voltage of 165 V and continuous stall ratings printed on the data plate. Serial number B 411652 is stamped on the rating plate. Per published Fanuc specifications for the A06B-0651-B005 configuration, this Model 10M unit operates at 1500 RPM rated speed, draws 12 A, and delivers approximately 12 Nm continuous stall torque. The motor includes an integrated tachogenerator rated at 6 V per 1000 RPM, providing analog velocity feedback to compatible Fanuc velocity control units in the VCU 6047 series and equivalent. Construction is the standard yellow cap DC servo configuration with a straight keyed output shaft and rear mounted tachogenerator housing. Mounting is via the integrated cast flange visible on the drive end. The A06B-0651-B005 is commonly found driving feed axes on Fanuc 5, 6, and 7 series CNC controlled machining centers, lathes, and grinders, and is used as a direct OEM replacement on legacy machine tools that retain DC drive electronics. Class B insulation is indicated on the nameplate. Permanent magnet field construction eliminates the need for separate field excitation circuitry. Surface wear and paint loss are visible on the yellow cap end housing.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-130\u003c\/p\u003e","brand":"Fanuc","offers":[{"title":"Default Title","offer_id":48819061981424,"sku":"m00130","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6574.jpg?v=1771025511"},{"product_id":"reliance-electric-ac-motor-436273-wc-p56c-1-hp-1725-rpm-stock-0226-124","title":"Reliance Electric AC Motor 436273-WC \/ P56C - 1 HP 1800 RPM","description":"\u003cp\u003eThe Reliance Electric 436273-WC is a Duty Master A-C Motor manufactured by Reliance Electric Company, Cleveland, Ohio. The nameplate identifies it as a P56C frame, three phase induction motor rated for 1725 RPM at 60 Hz. Dual voltage operation is supported at 230\/460V, with corresponding full load amperage of 3.6\/1.8 amps. The motor includes a 50 Hz rating of 380V, allowing international compatibility. Identification number E54825 and CSA certification 33P0T are stamped on the rating plate. Service factor is 1.0, ambient temperature rating is 40 degrees Celsius, insulation class A, NEMA Code K, with continuous time rating. The frame configuration is a C face flange mount design suitable for direct coupling to gear reducers, pumps, conveyors, and other driven equipment. A coupled component is attached to the C face output side of the motor, secured with four bolts. Markings on the front mounted accessory could not be confirmed from the available views. Buyer should verify the front mounted component during inspection prior to integration. The motor housing is finished in standard Reliance blue paint and shows typical surplus condition wear including paint chips, surface oxidation on machined surfaces, and dust accumulation. Manufactured in the U.S.A. by Reliance Electric Company, this motor is suited for general industrial applications including machine tool spindle drives, pump drives, fan applications, and conveyor systems requiring a 56C frame three phase motor at 1 HP class output.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-124\u003c\/p\u003e","brand":"Reliance Electric","offers":[{"title":"Default Title","offer_id":48819062014192,"sku":"m00124","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6579.jpg?v=1770824687"},{"product_id":"gould-servo-motor-m231-y50b-300y-ps-variable-3000-rpm-stock-0226-123","title":"Gould Permanent Magnet DC Servo Motor M231-Y50B-300Y-PS - 2 HP 3000 RPM","description":"\u003cp\u003eThe Gould M231-Y50B-300Y-PS is a permanent magnet DC servo motor manufactured by Gould Inc. Motion Control Division (Gettys), Racine, Wisconsin. This motor is part of the Gettys M231 series, commonly used in CNC machine tool retrofits, automation systems, and precision motion control applications. Serial number 71245R is stamped on the nameplate.\u003c\/p\u003e\n\u003cp\u003eNameplate specifications include a Back EMF (Ke) of 37.8 V\/KRPM, torque constant (Kt) of 3.20 LB IN\/AMP, rated current at stall of 33 amps, and an integrated tachometer with an output of 3 V\/KRPM. The connector diagram reference is 201 133 3049, and the outline drawing reference is 201 233 1247. The M231 series is a non sealed configuration within the Gettys M2 family, rated for a continuous torque of 105 LB IN and a maximum speed of 3000 RPM per manufacturer published specifications.\u003c\/p\u003e\n\u003cp\u003eConstruction features a black painted cylindrical steel housing with cooling fins, a keyed cylindrical output shaft, and an integrated junction box on the side housing two MS style military spec circular connectors for power and feedback connections. The motor incorporates a brake interface per the BRAKE: HZ field on the nameplate.\u003c\/p\u003e\n\u003cp\u003eThe Gettys M231 series has been sold under multiple brand names over its production history, including Gettys, Gould, Modicon, AEG, and Allen Bradley. Cross reference part numbers and replacement options are available through legacy Gettys service channels for CNC retrofit and obsolete motor replacement applications.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-123\u003c\/p\u003e","brand":"Gould","offers":[{"title":"Default Title","offer_id":48819062046960,"sku":"m00123","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1401.jpg?v=1770824626"},{"product_id":"fanuc-servo-motor-a06b-0273-b200-0100-6-kw-3000-rpm-stock-0226-132","title":"FANUC AC Servo Motor A06B-0273-B200 - 5 kW 3000 RPM","description":"\u003cp\u003eThe Fanuc A06B-0273-B200 is an alpha iS series AC servo motor, model aiS 40\/4000HV, manufactured by Fanuc Ltd. in Yamanashi, Japan. The nameplate identifies serial number C078G6881 and a manufacturing date of 2007.08. This high voltage three phase motor is rated at 5.5 kW continuous output per IEC60034 1, with a rated voltage of 408 V, rated current of 7.9 A, and a rated speed of 3000 min⁻¹ at 200 Hz. Required amplifier input is 400 to 480 V at 50\/60 Hz, with a peak amplifier current of 18 A. Stall torque is rated at 40 Nm. The motor uses Y (star) winding connection and Class F insulation. Ingress protection is rated IP67, supporting use in environments with dust and moisture exposure. Power factor is listed at 99 percent. The aiS 40\/4000HV is part of Fanuc's alpha i high voltage AC servo motor family, commonly applied on CNC machine tools, machining centers, and industrial automation equipment where high torque density and precision motion control are required. The motor integrates a serial pulsecoder for position feedback compatible with Fanuc alpha i series servo amplifiers and CNC controls in the 30i, 31i, 32i, 0i, and earlier alpha i generation systems. Manual reference number B 65262 is printed on the nameplate. Spec number A06B 0273 B200 #0100 identifies the configuration variant within the A06B 0273 product series.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-132\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48819062079728,"sku":"m00132","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1420.jpg?v=1770824563"},{"product_id":"fanuc-servo-motor-a06b-0501-b002-r-variable-2000-rpm-stock-0226-133","title":"FANUC Servo Motor A06B-0501-B002-R - 3 HP 2000 RPM","description":"\u003cp\u003eThe Fanuc A06B-0501-B002-R is a Model 10 AC servo motor manufactured by Fanuc Ltd. in Yamanshi, Japan, with a nameplate date of 01\/18\/2011 and serial number N758809. This unit is part of the Fanuc S series servo line widely used in CNC machine tools, machining centers, lathes, and industrial automation systems for axis drive applications. Rated for 144 V operation and 3 phase input, the motor produces a stall torque of 12 Nm at 11 A and a rated speed of 2000 RPM. The construction uses a permanent magnet field with Y winding connection and Class F insulation in accordance with IEC 34 1 standards. The \"R\" suffix on the type designation indicates the OEM variant of the standard A06B 0501 B002 platform. Compatible with Fanuc servo amplifiers and CNC control systems that support the Model 10 motor profile, this servo is commonly specified as a feed axis motor on Fanuc equipped machines. The nameplate confirms manufacturer, type, serial number, date code, voltage, stall torque, stall current, speed, insulation class, winding configuration, phase count, and country of origin. Buyers searching for replacement Fanuc Model 10 servo motors, A06B 0501 series spares, or Fanuc CNC axis drive components will find this unit referenced by part number A06B 0501 B002 R across active US MRO and surplus markets.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-133\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48819062112496,"sku":"m00133","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1423.jpg?v=1770824504"},{"product_id":"fanuc-dc-motor-a06b-0601-b025-2-hp-1500-rpm-stock-0226-134","title":"Gettys Fanuc DC Servo Motor A06B-0601-B025 - 2 kW 1500 RPM","description":"\u003cp\u003eThe Gettys Fanuc A06B-0601-B025 is a DC Servo Motor Model 10 manufactured by Fanuc Ltd. under license from Gettys Mfg. Co., Inc. Built in Japan and dated 09\/1989, this motor carries serial number C899H0017 and is identified on the nameplate as a permanent magnet excitation DC servo motor designed for CNC machine tool feed axis applications. Nameplate ratings list a continuous stall torque of 12 Nm, continuous stall current of 24 A, rated armature voltage of 92 V, and rated speed of 1500 RPM. Insulation is rated Class H with an ambient temperature rating of 40 degrees C. The integrated tachogenerator is rated at 6 V\/krpm for closed loop velocity feedback. Excitation is permanent magnet type, eliminating the need for a separate field supply. The A06B-0601-B025 was widely used as a feed axis drive on legacy Fanuc System 3, System 6, and System 10\/11\/12 controlled CNC lathes, mills, and machining centers, and is compatible with Fanuc DC servo velocity control units such as the A06B-6047 and A06B-6050 series amplifiers. Mounting follows the standard Fanuc Model 10 frame footprint. This motor is suitable for retrofit and legacy machine repair applications where an original Gettys Fanuc Model 10 DC servo is required. Cross reference designation A06B-0601-B025#7000 is also commonly used in the secondary market for this assembly.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-134\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48819062145264,"sku":"m00134","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1428_6caed804-674f-40d6-bbeb-2c18ffbbc812.jpg?v=1770824447"},{"product_id":"fanuc-servo-motor-a06b-0269-b200-0100-6-kw-3000-rpm-stock-0226-135","title":"Fanuc AC Servo Motor A06B-0269-B200#0100 - 5 kW 3000 RPM","description":"\u003cp\u003eThe Fanuc A06B-0269-B200#0100 is an AC servo motor from the alpha iS series, model aiS 30\/4000HV, manufactured in Yamanashi, Japan. The nameplate identifies serial number C077B9912 with a date code of 2007.07 and references manual number B-65262. This high voltage servo motor is rated at 5.5 kW continuous output and operates at a rated speed of 3000 min-1. Electrical ratings include 353V output, 9.3A at 200 Hz, and an amplifier input range of 400 to 480V at 50\/60 Hz, three phase, in a Y wind configuration. The motor lists a power factor of 98 percent and a stall torque of 30 Nm with a stall current of 16A. Construction carries Insulation Class F and an IP67 ingress protection rating, suitable for environments exposed to dust and water spray. Compliance markings on the nameplate include CE and TUV Rheinland. The aiS 30\/4000HV is commonly used as an axis drive motor on Fanuc controlled CNC machining centers, turning centers, and other high voltage servo applications paired with Fanuc alpha i series amplifiers. Built in feedback is provided through an integrated absolute pulse coder per Fanuc alpha iS specification. The unit ships as the motor assembly shown on the nameplate, with no additional cables, connectors, or amplifier components included unless visible in the listing photos.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-135\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48819062178032,"sku":"m00135","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1433.jpg?v=1770824369"},{"product_id":"fanuc-servo-motor-a06b-0315-b003-variable-2000-rpm-stock-0226-136","title":"FANUC AC Servo Motor A06B-0315-B003 - 3 HP 2000 RPM","description":"\u003cp\u003eThe Fanuc A06B-0315-B003 is an AC servo motor from the Model 10S series, manufactured by Fanuc Ltd. in Japan. This unit carries serial number G 829643 with a manufacture date of October 1988. The motor is rated at 150 volts, 3 phase, with 8 poles and operates at 2000 rpm. Stall torque is rated at 12 Nm with stall current of 7.6 amps. The excitation is permanent magnet type, and the windings carry a Class F insulation rating with an ambient temperature rating of 40 degrees C. Integrated into the rear of the motor is a Fanuc pulse coder providing position and velocity feedback for closed loop servo control. The 10S series motors were widely deployed across legacy Fanuc CNC systems including System 6, System 10, System 11, and early System 15 platforms, used as feed axis drives on machining centers, turning centers, grinders, and EDM equipment. The straight shaft output and red cap housing are characteristic of this generation of Fanuc AC servo motors. The nameplate indicates Patent Pending status at the time of manufacture. This motor is commonly paired with Fanuc velocity control units and servo amplifier modules from the A06B and A20B series. Suitable as a direct replacement or spare for installed Fanuc 10S applications, or for rebuilders and repair facilities servicing legacy CNC machine tools. Identification is based on direct nameplate inspection. Specifications listed reflect data printed on the motor rating plate.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-136\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48819062210800,"sku":"m00136","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1437.jpg?v=1770824306"},{"product_id":"mitsubishi-servo-motor-ha-200cs-2-kw-3000-rpm-stock-0226-137","title":"Mitsubishi AC Servo Motor HA200CS- 4 kW 2000 RPM","description":"\u003cp\u003eThe Mitsubishi HA200CS is a permanent magnet AC servo motor from the HA series, designed for use as a feed axis motor in CNC machine tools and industrial automation systems. Manufacturer specifications list the HA200CS at 3.5 kW rated output with a nominal rotation speed of 2,000 RPM. The motor uses a three phase AC power input and features a cylindrical straight shaft with a 35 mm diameter and a 114 mm centering diameter. Construction is non ventilated, with the power connector mounted at the front of the housing and a secondary shaft provided for mounting a separate position feedback device.\u003c\/p\u003e\n\u003cp\u003eThe nameplate identifies this unit as MFG Type 56H2CSBM and MFG No. S02300256. The unit was manufactured in the USA by Bodine Electric Company under license, with markings indicating Chicago 60618 origin. The HA200CS is originally compatible with the Tamagawa OSE 5KN 6 12 108 FA Coder encoder, which is sold separately and mounts to the secondary shaft.\u003c\/p\u003e\n\u003cp\u003eThis model is part of the Mitsubishi Meldas servo platform and is commonly found as a replacement on legacy CNC machining centers, lathes, and OEM equipment built with Mitsubishi MDS series drives. It is suitable as a direct OEM replacement for installations originally specified with the HA200CS reference. Encoder is not included with this unit. Buyers should confirm compatibility with their existing drive amplifier, cable assembly, and feedback device before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-137\u003c\/p\u003e","brand":"Mitsubishi","offers":[{"title":"Default Title","offer_id":48819062243568,"sku":"m00137","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1440.jpg?v=1770824251"},{"product_id":"fanuc-ac-motor-a06b-0501-b005-1-kw-2000-rpm-stock-0226-138","title":"FANUC AC Motor A06B-0501-B005 - Variable 2000 RPM","description":"\u003cp\u003eThe Fanuc A06B-0501-B005 is an AC servo motor Model 10 manufactured by Fanuc Ltd. in Japan. The nameplate identifies it as part of the Fanuc Model 10 servo family, with type designation A06B-0501-B005 and serial number C03ZM1006, date stamped 10\/21\/2010. It is rated for 144 volts, 3 phase operation, with a rated speed of 2000 RPM. Stall torque is listed as 12 Nm with a stall current of 11 A. The motor uses Class F insulation, Y winding connection, and a permanent magnet field. It conforms to IEC 34 1 standards.\u003c\/p\u003e\n\u003cp\u003eThis Model 10 servo is commonly used in Fanuc CNC machine tools, machining centers, lathes, and industrial automation systems requiring closed loop motion control. The A06B-0501 series motors are widely deployed across feed axis and rotary axis applications on Fanuc controlled equipment, and the B005 variant is referenced in the U.S. MRO and CNC spares market as a replacement and surplus part.\u003c\/p\u003e\n\u003cp\u003eIdentifiers visible on the nameplate include MODEL 10, TYPE A06B-0501-B005, No. C03ZM1006, and the Fanuc Ltd. Made in Japan marking. Output rating field on the nameplate is partially illegible and shows 0 kW continuous. Frequency and amp continuous values on the plate are also shown as 0, consistent with typical Fanuc Model 10 nameplate formatting where stall values are the primary reference. Refer to photos for additional condition detail and nameplate verification.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-138\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48819062276336,"sku":"m00138","price":1240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1445.jpg?v=1770824573"},{"product_id":"baldor-reliance-severe-duty-motor-ecp83770t-5-7-hp-1800-rpm-0226-373","title":"Baldor-Reliance Severe Duty Motor ECP83770T-5 - 7 HP 1800 RPM","description":"\u003cp\u003eUsed in industrial processing environments requiring IEEE 841 compliance, the Baldor-Reliance ECP83770T-5 is a 7.5 HP, 3-phase AC severe duty motor rated for 575V operation at 1765 RPM. Built to the Super-E efficiency standard, this motor carries NEMA Premium efficiency ratings and is confirmed to comply with IEEE Std 841-2009. The cast iron 213T frame houses a TEFC (Totally Enclosed Fan Cooled) enclosure rated for Class I, Division II, Groups A, B, C, and D hazardous locations. Full load current is 7.6A at 575V. Insulation class is F, design code is B, and the motor is rated for continuous duty at 40°C ambient. Spec number 07K629X614 and serial number F1306246563 are confirmed on both the motor nameplate and the original factory shipping carton, which remains intact. Bearings are 6307 ARB-6307. The motor ships in its original Baldor packaging and was manufactured in the USA.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-373\u003c\/p\u003e","brand":"Baldor-Reliance","offers":[{"title":"Default Title","offer_id":48824052056304,"sku":"m00373","price":2099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/AEF9AFE3-EBF2-4B06-9CD4-C5ACA1845ADB.jpg?v=1770930613"},{"product_id":"eg-g-torque-dc-motor-mt-5350-108cv-variable-variable-rpm-stock-0226-119","title":"EG\u0026G Torque Systems MT-5350-108CV PM Field DC Servo Motor","description":"\u003cp\u003eThe EG\u0026amp;G Torque Systems MT-5350-108CV is a permanent magnet field DC brushed servo motor stamped with a manufacturing date code of October 1981. EG\u0026amp;G Torque Systems, later operated as MTI Torque Systems and Cleveland Motion Controls (CMC), produced brush and brushless servo motors widely deployed in CNC machine tools, indexers, rotary tables, robotic positioners, packaging machinery, and general industrial motion control applications throughout the 1970s through the 1990s.\u003c\/p\u003e\n\u003cp\u003eConstruction includes a square four bolt mounting flange, a keyed cylindrical output shaft, and a side mounted brush access cap for routine commutator and brush service. Two military style round MS connectors are mounted on the rear of the housing, one identified with code C8 intended for tachometer feedback and the second for armature and field circuit termination. The closed rear end cap indicates this unit is not configured with a rear shaft mounted encoder. Closed loop velocity control is supported through the integral tachometer feedback channel.\u003c\/p\u003e\n\u003cp\u003eA blue and silver A 1 Servomotor Repair service tag is affixed to the housing showing service reference number 539018, indicating the unit was previously processed by a third party motor repair facility. The original EG\u0026amp;G Torque Systems stamped aluminum nameplate remains intact.\u003c\/p\u003e\n\u003cp\u003eReplacement and crossover support for EG\u0026amp;G Torque Systems MT series motors is available through aftermarket suppliers including Glentek and Potomac Electric. The unit ships as removed with no testing claims, no warranty, and no performance guarantees stated. Buyers should verify electrical specifications against their machine documentation before installation.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-119\u003c\/p\u003e","brand":"EG\u0026G Torque","offers":[{"title":"Default Title","offer_id":48824262000880,"sku":"m00119","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1398.jpg?v=1771346750"},{"product_id":"fanuc-servo-motor-a30-3000-a06b-0153-b675-r-ac-30-kw-3000-rpm-stock-0226-128","title":"FANUC A06B-0153-B675 AC Spindle Motor A30\/3000 30 kW 3000 RPM","description":"\u003cp\u003eThe Fanuc A06B-0860 series Alpha 30\/3000 is an AC spindle motor designed for use on CNC machine tools requiring high power density and tight servo integration. Rated at approximately 30 kW continuous output, the Alpha 30 platform is built around a four pole, three phase induction design with class H insulation and is engineered to operate with Fanuc Alpha series spindle amplifier modules over the Fanuc serial spindle interface. The motor body uses a fully enclosed cast frame with a large square flange, rear mounted axial cooling fan housed under the red painted cap, and a keyed cylindrical output shaft with shaft diameter typical of the Alpha 30 family at 60 mm. Two top mounted connectors accept power input and feedback signal cable, with an additional side connector for auxiliary feedback or brake circuitry. Speed range for the Alpha 30\/3000 variant covers a base point near 1150 rpm with a published maximum of 4500 rpm. The integral spindle sensor provides position and velocity feedback compatible with Fanuc serial spindle controls used in machining centers and turning centers. The motor carries an A 1 Servomotor Repair service tag with reference number 541097, indicating prior third party rebuild work was performed. The original Fanuc nameplate is not present on the item as received. Application areas include vertical machining centers, horizontal machining centers, and CNC lathes operating under Fanuc 15, 16, 18, 21, 30i, and 31i series controls.\u003c\/p\u003e\n\u003cp\u003eStock # 0226-128\u003c\/p\u003e","brand":"FANUC","offers":[{"title":"Default Title","offer_id":48824262033648,"sku":"m00128","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_6598.jpg?v=1771353113"},{"product_id":"mitsubishi-electric-ac-servo-motor-hc202bs-2-kw-2000-rpm-0226-375","title":"Mitsubishi Electric AC Servo Motor HC202BS - 2 kW \/ 2000 RPM","description":"\u003cp\u003eThis used Mitsubishi Electric HC202BS servo motor represents a capable solution for industrial motion control applications. Rated at 2 kW output with 2000 RPM capability, the unit operates on three-phase AC at 138 V, 11 A. Manufactured in Japan and compliant with IEC 60034-1 1999 standards, it features IP65 protection and Class F insulation specifications. The motor's square frame accommodates face-mount flange installation with a keyed output shaft and top-mounted conduit box. An integrated resolver or encoder feedback assembly supports compatibility with Mitsubishi MR-series servo amplifiers for CNC and automation platforms. At 18 kg, the unit demonstrates expected surface wear from industrial service. All technical data verified from the original nameplate (Serial: M70173001 07Z).\u003c\/p\u003e\n\u003cp\u003eStock # 0226-375\u003c\/p\u003e","brand":"Mitsubishi Electric","offers":[{"title":"Default Title","offer_id":48833796374768,"sku":"m00375","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/8976BC91-FB67-4DB2-8FDA-71907E121471.jpg?v=1771292898"},{"product_id":"brook-hansen-ac-motor-z900287-00-2-hp-1800-rpm-0226-573","title":"Brook Hansen AC Motor Z900287-00 - 2 HP 1800 RPM","description":"\u003cp\u003eThe Brook Hansen Z900287-00 is a 2 HP three-phase AC motor rated at 1720 RPM, operating on 208\/230\/460V at 60 Hz. The nameplate identifies the frame as W-DA90LT-D and lists a full-load amperage of 5.80\/2.90A. Enclosure type is TEFC (IC411), with an IP55 ingress protection rating and Class F insulation. The motor carries a continuous duty rating and was manufactured to CSA standards at Brook Hansens England facility. Efficiency is rated at 84.0% at full load. The unit features a flanged face mount with a pinion output shaft visible on the drive end, along with an integrated electromagnetic brake assembly. The brake coil is rated at 460V AC with a reference value of 0.13A, as indicated on the secondary data label. Brake full rated torque is noted as 132 lb-in. A manual brake release lever is present on the motor body. The motor carries serial number P202524. Brook Hansen, headquartered in Arlington Heights, IL and Toronto, ONT, supplied AC motors widely for industrial machinery applications including injection molding equipment, conveyors, and machine tools. Frame size W-DA90LT-D corresponds to a metric IEC 90 frame, suitable for direct coupling or flange-mounted drive arrangements.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-573\u003c\/p\u003e","brand":"Brook Hansen","offers":[{"title":"Default Title","offer_id":48885114700016,"sku":"m00573","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/9A452CAF-2BB9-4249-8C7F-3497FFE71519.jpg?v=1771868085"},{"product_id":"brook-hansen-ac-motor-2900287-00-2-hp-1800-rpm-0226-574","title":"Brook Hansen AC Motor 2900287-00 - 2 HP 1800 RPM","description":"\u003cp\u003eUsed in general industrial applications requiring three-phase AC power, the Brook Hansen 2900287-00 is a 2 HP totally enclosed fan-cooled motor rated for continuous duty. The nameplate identifies frame designation W-DA90LT-D with a synchronous speed resulting in 1720 r\/min at nameplate conditions. Voltage configuration is 208-230\/460V, three-phase, 60 Hz, with a current draw of 5.80\/2.90 amps. Insulation is Class F, and the enclosure is rated IC411 and IP55, providing protection against dust and water ingress. The motor carries CSA certification (LR 10159) and bears a CE mark, and was manufactured in England. A pinion gear is visible on the output shaft in the photos, and a manual brake release knob is present on the non-drive end, indicating this unit includes an integral brake. The junction box is mounted on the top of the frame. Brook Hansen, now operating as Brook Crompton, is a long-established manufacturer of industrial electric motors used across manufacturing, processing, and machine tool applications. The catalog number 2900287-00 and serial number P202523 are confirmed from the nameplate. Frame size W-DA90LT-D corresponds to a metric IEC 90 frame in the Brook Hansen designation system.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-574\u003c\/p\u003e","brand":"Brook Hansen","offers":[{"title":"Default Title","offer_id":48885122007280,"sku":"m00574","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/2D5E364D-AAEE-480A-BA05-ED5B90C7587A.jpg?v=1771868724"},{"product_id":"sew-eurodrive-screw-conveyor-drive-gearbox-fa77-1-kw-0-rpm-0226-593","title":"SEW Eurodrive Screw Conveyor Drive Gearbox FA77 - 1 kW 0 RPM","description":"\u003cp\u003eA parallel helical offset gear unit from SEW Eurodrive, branded as the Snuggler, this size FA77 screw conveyor drive gearbox is part of the F-series line engineered for shaft-mounted conveyor drive applications. The Snuggler designation refers to SEW Eurodrive's compact parallel shaft helical offset gear unit configuration, which places the output shaft offset and parallel to the input, allowing the unit to mount close to the driven shaft without extended structure. The cast iron housing is painted in SEW Eurodrive's characteristic green finish. The unit features a hollow bore output flange on one face and a circular motor adapter plate on the opposite face, which accommodates a C-face motor mount. No motor is included. A lubrication fitting is visible at the top of the housing. The FA77 frame size positions this unit in the mid-capacity range of the F-series, with maximum output torque of 1,500 Nm per published SEW Eurodrive specifications for this frame (sourced from manufacturer published data, not visible nameplate). Gear ratio and full type number could not be confirmed from available photos. Compatible motor input adapters, shaft seals, and mounting hardware should be verified against the installed configuration. The unit is sold as a gear unit only.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-593\u003c\/p\u003e","brand":"SEW Eurodrive","offers":[{"title":"Default Title","offer_id":48885132689648,"sku":"m00593","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/55FB2ACB-076A-4516-9147-46DB57B7FEF8.jpg?v=1771869391"},{"product_id":"ohio-gear-worm-gear-reducer-with-motor-o-3-assembly-b-501-ratio-variable-0-rpm-0226-602","title":"Ohio Gear Worm Gear Reducer with Motor O-3, Assembly B, 50:1 Ratio - Variable 0 RPM","description":"\u003cp\u003eOhio Gear catalog number O-3 is a worm gear reducer assembled with an integral motor, manufactured by Ohio Gear, a division of Towmotor Corp. of Cleveland, Ohio. The unit carries serial number 775634 and is configured as Assembly B with a 50:1 reduction ratio. The cast iron gearbox housing is painted in the manufacturer's characteristic teal green and is base-mounted on a steel plate, allowing for straightforward installation in a variety of industrial drive applications. The output shaft is visible on the front face of the reducer, and a flexible jaw-type coupling connects the motor shaft to the gearbox input. An oil fill port is present on the top of the gearbox housing. The motor is directly coupled to the reducer and shares the same base plate, forming a compact gearmotor assembly suited for low-speed, high-torque drive requirements. Worm gear reducers with a 50:1 ratio are commonly used in conveyor systems, packaging equipment, agitators, and other machinery requiring significant speed reduction from a standard motor input. Motor horsepower and electrical specifications were not legible in the available photographs.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-602\u003c\/p\u003e","brand":"Ohio Gear","offers":[{"title":"Default Title","offer_id":48885441593584,"sku":"m00602","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/49777229-7BD9-4F8A-BC3D-AEDF486EB7AC.jpg?v=1771876235"},{"product_id":"worldwide-electric-corporation-ac-motor-wwem20-18-256t-20-hp-1800-rpm-0226-603","title":"WorldWide Electric Corporation AC Motor WWEM20-18-256T - 20 HP 1800 RPM","description":"\u003cp\u003eWorldWide Electric Corporation model WWEM20-18-256T is a 20 HP EPACT-rated three-phase induction motor configured for industrial applications. The nameplate specifies a voltage rating of 230\/460V at 60 Hz, with a full-load current draw of 49.2\/24.6 amps and a rated speed of 1770 RPM. The motor carries a 256T frame designation and is classified as NEMA Design B with Class F insulation. Full-load efficiency is rated at 91.0 percent, with 3\/4-load efficiency at 90.9 percent and a power factor of 0.84. The kVA code is G and the service factor is 1.15. Drive-end bearing is listed as 6309 and the opposite drive-end bearing is 6308. The ambient temperature rating is 40 degrees C continuous. The motor is also listed as usable on a 208V network at 54.12 amps. A lubrication label visible on the frame indicates the bearings were serviced with Exxon Polyrex EM grease. The date code shown is 2006.10 and the serial number is KB009005. The unit features a TEFC enclosure configuration consistent with the 256T frame class and is CSA and CE marked per the nameplate.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-603\u003c\/p\u003e","brand":"WorldWide Electric Corporation","offers":[{"title":"Default Title","offer_id":48885445230832,"sku":"m00603","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/F467A6DA-66BB-4C6B-B064-1BF60D68A843.jpg?v=1771876377"},{"product_id":"fanuc-ac-spindle-motor-a06b-0729-b102-11-kw-1500-rpm-0226-604","title":"Fanuc AC Spindle Motor A06B-0729-B102 - 11 kW 1500 RPM","description":"\u003cp\u003eThe Fanuc Model 22P AC Spindle Motor, part number A06B-0729-B102, is a three-phase spindle motor manufactured by Fanuc Ltd in Japan. The nameplate identifies a continuous power rating of 11 kW with a 30-minute rating of 15 kW, and a variable speed range of 1500 to 6000 RPM. Amperage is listed at continuous and 30-minute values of approximately 40 and 58 amps respectively. The motor carries Class F insulation per Rule JEC-37 and serial number U-881531, dated 98.08. The unit features a ribbed cast housing with an integral cooling fan at the rear and a flanged face-mount output end with a multi-groove pulley installed on the shaft. A separate terminal box is mounted on top of the motor body. The A06B-0729-B102 is compatible with Fanuc spindle drive systems and is commonly found in CNC machining centers and turning centers requiring AC spindle drive capability. The motor frame construction is heavy-duty cast iron. Pulley is included as shown in photos.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-604\u003c\/p\u003e","brand":"Fanuc","offers":[{"title":"Default Title","offer_id":48885449261296,"sku":"m00604","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/3A1CE615-9E84-4244-BAD6-FA9FAE1CCB16.jpg?v=1771876497"},{"product_id":"franz-kessler-spindle-motor-000666956-variable-0226-607","title":"Franz Kessler Spindle Motor 000.666.956 - Variable","description":"\u003cp\u003eUsed in high-precision CNC machining centers and grinding applications, the Franz Kessler spindle motor carrying part number 000.666.956 is a compact, flange-mount AC spindle motor rated to a maximum speed of 10,000 RPM as stamped on the front nameplate. Serial number 299 257 is confirmed visible. The motor features a square flange mount body with a precision machined output shaft and central bore, consistent with direct-drive spindle applications. A Deublin rotating union, model 1111-002-105, is mounted to the rear of the unit, indicating coolant-through capability for through-spindle coolant delivery. Multiple electrical leads are present, including power, feedback, and ground wiring with connectors. Franz Kessler is a German manufacturer recognized as a leading supplier of motor spindles for the machine tool industry, with products known for use in metalworking, precision grinding, and milling applications. The front face plate shows the Kessler logo alongside the MPN and serial number. This unit includes the Deublin rotating union assembly as visible in photos. Power rating and voltage specifications are not confirmed from visible nameplate data; published specifications for this MPN were not located in available manufacturer documentation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-607\u003c\/p\u003e","brand":"Franz Kessler","offers":[{"title":"Default Title","offer_id":48885554839792,"sku":"m00607","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/EE6A1749-B22D-4D67-9468-F7B97A289453.jpg?v=1771880454"},{"product_id":"franz-kessler-ac-motor-spindle-000666956-variable-0226-608","title":"Franz Kessler AC Motor Spindle 000.666.956 - Variable","description":"\u003cp\u003eUsed in CNC machining centers requiring high-speed spindle drive, the Franz Kessler AC motor spindle carrying part number 000.666.956 is a compact, flanged-mount spindle assembly rated to a maximum speed of 10,000 RPM as stamped on the nameplate. Serial number 299 121 is visible on the output face. The unit features a stainless-clad cylindrical motor body with a precision bearing cartridge integrated at the output end, a square flange mounting interface, and a straight shaft stub with a hollow bore. Coolant and pneumatic connections are present at the top of the housing, and a Deublin rotary union model 1111-002-105 is integrated at the rear of the assembly for through-spindle media delivery. The Deublin union bears serial number 214866\/G0218 and is marked Made in Germany. Franz Kessler is a premium German manufacturer of motor spindles supplying major machine tool OEMs including Chiron, Hermle, and Deckel Maho. This spindle assembly is sold as a complete unit and includes the attached wiring harnesses. Buyers should verify dimensional compatibility and interface requirements with their specific machine application prior to purchase.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-608\u003c\/p\u003e","brand":"Franz Kessler","offers":[{"title":"Default Title","offer_id":48885558477040,"sku":"m00608","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/3844B845-6DB5-4294-A130-34ED7E98C83E.jpg?v=1771880712"},{"product_id":"ge-fanuc-ac-servo-motor-a06b-0314-b0017000-1-kw-2000-rpm-0226-589","title":"GE Fanuc AC Servo Motor A06B-0314-B001#7000 - 1 kW 2000 RPM","description":"\u003cp\u003eUsed in CNC machining centers and automated machine tool applications, the GE Fanuc AC Servo Motor Model 5S carries part number A06B-0314-B001#7000 and was manufactured in Japan. The nameplate confirms 3-phase operation, 8 poles, 126V, a stall current of 5.8A, stall torque of 5.9 Nm, and a rated speed of 2000 RPM. Insulation is Class F, rated for ambient temperatures up to 40°C. Excitation is via permanent magnet. The motor is equipped with a pulse coder feedback device for closed-loop position and velocity control, making it compatible with Fanuc Series 0, Series 6, Series 10, Series 11, and Series 15 CNC systems that use the A06B-0314 motor series. Serial number C913C2935 and date code 91 03 are legible on the nameplate. The output shaft has a spur gear installed as visible in the photos. The motor features a square flange mount with four-bolt pattern and dual conduit entry ports on the rear. This unit is offered as surplus industrial equipment.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-589\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":48885790605552,"sku":"m00589","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/14870AA9-DD15-42F6-A015-ECCB3E88E678.jpg?v=1771886881"},{"product_id":"nord-drivesystems-two-speed-inline-helical-gearmotor-sk015i71l2458n-1-hp-202101-rpm-0226-590","title":"Nord Drivesystems Two-Speed Inline Helical Gearmotor SK015I71L2\/4.58N - 1 HP 202\/101 RPM","description":"\u003cp\u003eNord Drivesystems two-speed inline helical gearmotor, model SK015I71L2\/4.58N. Combines a dual-winding AC motor with an integrated inline helical gear reducer in a single foot-mounted cast iron assembly. Motor operates on two independent winding configurations: a 2-pole winding at 3450 RPM input and a 4-pole winding at 1725 RPM input, delivering two selectable output shaft speeds of approximately 202 RPM and 101 RPM per nameplate data. Rated voltage 230V, 3-phase. Full-load current 1.5A at high speed, 1A at low speed. Output torque rated at 181 lb-in per nameplate. AGMA rated. Class F insulation. Cast iron housing with integral foot mount base. Conduit box present on motor end for field wiring connections. Output sprocket mounted on shaft and included. Serial number 115768-101. This unit provides two discrete output speeds from a single self-contained drive assembly without the need for a variable frequency drive or external speed control. Suitable for replacement or retrofit in conveyors, feeders, packaging lines, and other industrial machinery originally designed around dual-speed gearmotor configurations. Nord Drivesystems is a German manufacturer of industrial gear units and gearmotors with global distribution and broad aftermarket parts availability.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-590\u003c\/p\u003e","brand":"Nord Drivesystems","offers":[{"title":"Default Title","offer_id":48885824585968,"sku":"m00590","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/43624C63-B39A-42AD-A776-CF2521322345.jpg?v=1771887160"},{"product_id":"ye-li-em-co-ltd-ac-servo-motor-ybl13s-95lz-2-kw-2000-rpm-0226-628","title":"Ye Li E\u0026M Co., Ltd. AC Servo Motor YBL13S-95L.Z - 2 kW 2000 RPM","description":"\u003cp\u003eUsed in CNC machining centers and industrial automation equipment, the Ye Li E\u0026amp;M YBL13S-95L.Z is an AC brushless servo motor rated at 1500W with a rated speed of 2000 RPM. The nameplate confirms a torque output of 7.45 N.m and a rated current of 7.2A. The integrated encoder is specified as an 8P-2500 P\/R type, providing position and velocity feedback for closed-loop servo control applications. The motor features a 130mm square flange frame consistent with the YBL13S series, with a front face showing a keyed output shaft. Connector housing is mounted on the top of the motor body. The unit carries CE marking and was manufactured by Ye Li E\u0026amp;M Co., Ltd., a Taiwanese servo motor manufacturer whose products are widely used in machine tool and automation OEM applications throughout Asia and globally. Serial number 1502-0104 is visible on the nameplate. The motor was received in original factory packaging with wood shavings and shredded paper packing material surrounding the unit. The box label references Ye Li Electric Machinery Co., Ltd. and identifies this as part of the AC brushless servo motor series.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-628\u003c\/p\u003e","brand":"Ye Li E\u0026M Co., Ltd.","offers":[{"title":"Default Title","offer_id":48890434060528,"sku":"m00628","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/29531CAC-E045-4A61-A184-03936D52BCF5.jpg?v=1771946460"},{"product_id":"fanuc-dc-servo-motor-a06b-0653-b0050008-variable-37-nm-0226-745","title":"Fanuc DC Servo Motor A06B-0653-B005#0008 - Variable 37 NM","description":"\u003cp\u003eUsed in CNC machining centers and industrial automation systems, the Fanuc DC Servo Motor Model 30M is a permanent magnet DC servo motor designed for high-torque axis drive applications. This unit carries part number A06B-0653-B005#0008, indicating a keyed shaft configuration with tacho generator feedback. Nameplate data confirms a continuous stall torque of 37 Nm, a continuous stall current of 24 A, and a rated voltage of 210 VDC. Rated speed is 1200 RPM. The tacho generator output is rated at 6V per 1000 RPM. Excitation is by permanent magnet. Insulation is Class H, and the ambient temperature rating is 40 degrees C. The motor is manufactured by Fanuc Ltd. and made in Japan. Serial number C917H0098 and date code 91.07 are visible on the nameplate. Two multi-pin circular connectors are present at the rear of the motor body. A timing belt pulley is installed on the output shaft. The motor mounts to a steel flange plate visible in the photos. The A06B-0653 series is a well-established platform in legacy Fanuc 0, 6, 10, 11, and 15 series CNC control applications.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-745\u003c\/p\u003e","brand":"Fanuc","offers":[{"title":"Default Title","offer_id":48898295726320,"sku":"m00745","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/5EED097B-6CFE-4252-8325-7CE497B4ECE0.jpg?v=1772052393"},{"product_id":"fanuc-dc-servo-motor-a06b-0653-b005-variable-1200-rpm-0226-747","title":"Fanuc DC Servo Motor A06B-0653-B005 - Variable 1200 RPM","description":"\u003cp\u003eA DC Servo Motor from Fanuc in the 30M series, part number A06B-0653-B005, rated for continuous stall torque of 37 Nm at 24 A and 210 VDC. Rated speed is 1200 RPM. Excitation is by permanent magnet. Tacho generator output is specified at 6V per 1000 RPM. Insulation class is H and ambient temperature rating is 40 degrees C. Serial number C91YH0218 and date code 91.11 are visible on the nameplate. Manufactured by Fanuc Ltd. and made in Japan.\u003c\/p\u003e\n\n\u003cp\u003eThe motor body is finished in black with a yellow end cap, and two multi-pin circular connectors are present at the rear. The output shaft protrudes through a steel mounting flange plate visible in the photos, with a smooth cylindrical shaft end shown. No timing pulley or gear is installed on this unit. The yellow end cap bears the cast text \"FANUC\" and \"TOKYO JAPAN.\"\u003c\/p\u003e\n\n\u003cp\u003eThe A06B-0653 30M platform is widely used in legacy Fanuc 0, 6, 10, 11, and 15 series CNC control systems as an axis drive motor. This MPN is cross-referenced in the market as A06B0653B005 and is compatible with Fanuc DC servo amplifier systems requiring a 37 Nm continuous torque rating.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-747\u003c\/p\u003e","brand":"Fanuc","offers":[{"title":"Default Title","offer_id":48898315026672,"sku":"m00747","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/7D51A70D-F256-4AE8-86C1-B2940012DA75.jpg?v=1772052854"},{"product_id":"hurst-synchronous-ac-gearmotor-2602-006-variable-10-rpm-0226-731","title":"Hurst Synchronous AC Gearmotor 2602-006 - Variable 10 RPM m00731","description":"\u003cp\u003eUsed in industrial timing, valve actuation, instrumentation, and process control applications requiring a precise, low-speed drive, the Hurst Model T synchronous gearmotor operates at a fixed 10 RPM output and draws 115V AC at 60 Hz with 7 watts of input power. Manufactured by Hurst Manufacturing, a division of Emerson Electric Co., in Princeton, Indiana, this unit carries part number 2602-006, also known by Grainger catalog number 6Z133. The motor features a permanent magnet synchronous design with a 30:1 gear ratio, a capacitor run circuit requiring a 0.68 MFD run capacitor (date code ZP 4202 visible on nameplate), and is rated for up to 180 oz-in of torque at 175 pulses per second. The reversible geared output shaft is visible in the photos. The unit is housed in a cast and machined steel enclosure with a closed frame construction and includes attached lead wires in red, blue, and black. UL listed (E5357 per published specifications). The 2602-006 is a discontinued product no longer manufactured; replacement units are unavailable from the OEM. Compatible capacitor and wiring requirements should be referenced against Hurst Series T published specifications prior to installation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-731\u003c\/p\u003e","brand":"Hurst","offers":[{"title":"Default Title","offer_id":48916639875312,"sku":"m00731","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/EB673AA2-1AF5-4B02-9AE2-7C414383CB9D.jpg?v=1772117412"},{"product_id":"hurst-synchronous-ac-gearmotor-2602-006-variable-10-rpm-0226-732","title":"Hurst Synchronous AC Gearmotor 2602-006 - Variable 10 RPM m00732","description":"\u003cp\u003eUsed in instrument drive, timer, and low-speed automation applications, the Hurst Model T synchronous gearmotor operates at 10 RPM with an input of 115 VAC at 60 Hz. Manufactured by Hurst Manufacturing, a division of Emerson, this unit carries part number 2602-006 and is also cross-referenced under Grainger catalog number 6Z133. The motor is rated at 7 watts input power with a capacitor value of 0.68 MFD. Per manufacturer published specifications, torque output is rated at 180 oz-in at 175 pulses per second. The Series T platform uses a permanent magnet can-stack construction with integral gearing, providing low output speeds from a compact form factor. The date code on both the unit nameplate and original box reads 1105, indicating manufacture in November 2005. The motor ships in its original Hurst cardboard box. The 60 mm series construction is compatible with a range of OEM instrument and industrial drive assemblies requiring precise low-speed synchronous output. Rated for 60 Hz operation only. This is a discontinued part number; Hurst manufacturing operations are now associated with Nidec Motors.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-732\u003c\/p\u003e","brand":"Hurst","offers":[{"title":"Default Title","offer_id":48916640006384,"sku":"m00732","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/AD9D8120-ACDD-4212-93B4-4171AA0A8183.jpg?v=1772117457"},{"product_id":"hurst-synchronous-ac-gearmotor-2602-006-variable-10-rpm-0226-733","title":"Hurst Synchronous AC Gearmotor 2602-006 - Variable 10 RPM m00733","description":"\u003cp\u003eUsed in timing, positioning, valve actuation, and low-speed drive applications, the Hurst Model T synchronous gearmotor with part number 2602-006 is a permanent magnet AC synchronous unit manufactured by Nidec Motor Corporation in Princeton, Indiana. It operates at 115 volts, 60 Hz, and draws 7 watts of input power, producing an output speed of 10 RPM. The capacitor value is 0.68 MFD. Torque rating is 180 oz-in at 175 pulses per second, sourced from manufacturer published specifications for this MPN. The unit belongs to the 60 mm Series T geared family, known for compact form factor and consistent synchronous speed performance tied directly to line frequency. Two output shafts are present, one on each end of the unit, with lead wires for electrical connection. Date code 1712 is visible on the nameplate. The 2602-006 is cross-referenced under Grainger part number 6Z133. This unit ships in its original manufacturer cardboard box.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-733\u003c\/p\u003e","brand":"Hurst","offers":[{"title":"Default Title","offer_id":48916640792816,"sku":"m00733","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/C42C1098-C1A6-4FD0-AD1C-7719746A49E5.jpg?v=1772117496"},{"product_id":"hurst-synchronous-ac-gearmotor-2602-006-variable-10-rpm-0226-734","title":"Hurst Synchronous AC Gearmotor 2602-006 - Variable 10 RPM m00734","description":"\u003cp\u003eThe Hurst Model T synchronous AC gearmotor, part number 2602-006, is a permanent magnet geared instrument motor rated at 10 RPM, 7 watts, 115 volts, 60 Hz. It carries a capacitor rating of 0.68 MFD and is manufactured by Hurst Manufacturing Division of Emerson Co., Princeton, Indiana. The item is also cross-referenced under Grainger part number 6Z133. Permanent magnet construction provides inherent dynamic braking characteristics and low rotor speed output. The compact square-frame housing is made of steel with a front face plate, and the motor includes two output shaft positions — one axial and one perpendicular — visible in the photos. Three lead wires are present for connection. The motor is part of the Series T geared family, which uses high-quality internal gearing to step down from synchronous base speed to low output RPM. Date code 2511 is visible on both the nameplate and original box label. The original Hurst factory box is included. This motor is commonly used in timer mechanisms, dispensing equipment, display turntables, and other low-speed synchronous drive applications requiring consistent output speed.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-734\u003c\/p\u003e","brand":"Hurst","offers":[{"title":"Default Title","offer_id":48916641186032,"sku":"m00734","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/B3B56810-BA9C-4590-9681-A61D0C74D066.jpg?v=1772117521"},{"product_id":"hurst-synchronous-ac-gearmotor-2602-006-variable-10-rpm-0226-741","title":"Hurst Synchronous AC Gearmotor 2602-006 - Variable 10 RPM m00741","description":"\u003cp\u003eA synchronous gearmotor from Hurst, a brand operating under Nidec Motor Corporation, this Model T unit carries part number 2602-006 and is rated at 10 RPM output speed. The nameplate confirms operation at 115 volts, 60 Hz, with a power consumption of 7 watts and a capacitor rating of 0.68 MFD. The Grainger catalog number 6Z133 appears on the original box label, which also confirms the same specifications: 115V, 60 Hz, 7 watts, and 10 RPM. The unit ships in its original manufacturer box with a manufacturing date code of 1412. Hurst Model T synchronous gearmotors are commonly used in timing, metering, and low-speed drive applications across industrial and commercial equipment. The compact square-frame construction features four mounting holes on the output face and lead wire termination. Output shaft is visible and extends from the front face of the unit. CSA certification mark is visible on the nameplate.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-741\u003c\/p\u003e","brand":"Hurst","offers":[{"title":"Default Title","offer_id":48916643873008,"sku":"m00741","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/4302277E-7996-46DF-A6D6-E79F0E891134.jpg?v=1772117832"},{"product_id":"hurst-synchronous-ac-gearmotor-2602-006-variable-10-rpm-0226-742","title":"Hurst Synchronous AC Gearmotor 2602-006 - Variable 10 RPM m00742","description":"\u003cp\u003eThe Hurst Model T synchronous gearmotor, part number 2602-006, is a compact AC gearmotor rated at 10 RPM output speed, 7 watts, 115V, 60Hz. The nameplate also indicates a capacitor rating of .68 MFD and lot code ZP 3003. Manufactured by Hurst Mfg., a division of Emerson Electric Co., based in Princeton, Indiana, this motor belongs to the well-established Hurst Model T series, widely used in timing, instrumentation, vending, and light-duty drive applications requiring precise low-speed synchronous output. The unit features a single output shaft visible from both photo angles, with lead wires in black, red, and blue extending from the body. The compact square frame construction is consistent with standard Hurst Type T packaging. At 115V 60Hz, this motor is suited for North American AC power applications. The .68 MFD capacitor specification is noted on the nameplate and is relevant for proper external capacitor selection when wiring this motor for single-phase operation. MPN 2602-006 can be cross-referenced against Hurst catalog data for confirmed dimensional and torque specifications.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-742\u003c\/p\u003e","brand":"Hurst","offers":[{"title":"Default Title","offer_id":48916644462832,"sku":"m00742","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/7E4F1CAA-E58D-4CE4-B790-778CF7EF0826.jpg?v=1772117890"},{"product_id":"dayton-ac-motor-2n865t-1-hp-1800-rpm-0226-766","title":"Dayton AC Motor 2N865T - 1 HP 1800 RPM","description":"\u003cp\u003eUsed in general industrial, pump, fan, and conveyor applications, the Dayton 2N865T is a 1\/2 HP three-phase AC induction motor built on a NEMA 56 frame. It operates on 208-230\/460V AC at 60 Hz with full-load amperage of 1.9-1.9\/0.9A, and is also rated for 50 Hz operation at 208-220\/440V, 1425 RPM per the secondary nameplate label. At 60 Hz, nameplate RPM is 1725. The enclosure is TEFC (Totally Enclosed Fan Cooled), duty rated Continuous, with insulation class B and a maximum ambient temperature of 40 degrees C. Service factor is 1.0. NEMA nominal efficiency is rated at 72.0. Shaft and opposite end bearings are both 6203. The motor reference numbers visible on the nameplate are R060116T and F401B. LR KVA code is L. Manufactured by Dayton Electric Mfg. Co., Niles, IL 60714 USA. The three-phase design accepts both 208-230V wye and delta configurations as well as 460V wiring, with lead diagrams printed on the nameplate. This motor is reversible by interchanging any two line leads.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-766\u003c\/p\u003e","brand":"Dayton","offers":[{"title":"Default Title","offer_id":48916775633136,"sku":"m00766","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/3F87F951-DBC5-4775-9F05-9FCBA6F067CA.jpg?v=1772122171"},{"product_id":"parker-hannifin-planetary-gearhead-ps180-005-sh-with-mt180-002-motor-adapter-variable-0-rpm-0226-767","title":"Parker Hannifin Planetary Gearhead PS180-005-SH with MT180-002 motor adapter - Variable 0 RPM","description":"\u003cp\u003eThe Parker Bayside PS180-005-SH is a Gen II Stealth series inline helical planetary gearhead with a 5:1 reduction ratio, built on the 180mm frame platform. The PS series uses an all-helical planetary gear design with Parker Bayside's HeliCrown gear tooth profile and plasma nitriding heat treatment, delivering high torque capacity, low backlash, and low noise output. The 180mm frame is the largest in the standard PS series lineup, making this unit well-suited for high-torque servo applications in industrial automation, robotics, packaging, and semiconductor handling equipment.\u003c\/p\u003e\n\n\u003cp\u003eThis unit carries serial number 121030N0091 (Rev B) on the gearhead label (PS180-005-SH) and is accompanied by motor adapter MT180-002 (serial number 121030N0094, Rev BK), both labeled by Parker Hannifin Corp., Electromechanical Automation Division. The motor adapter is the interface component used to mate a compatible servo motor to the gearhead input. The adapter is present and attached. The gearhead output shaft is visible, solid, and of substantial diameter consistent with the 180mm frame class. An eyebolt is installed at the top for rigging.\u003c\/p\u003e\n\n\u003cp\u003eParker Bayside is a US-manufactured premium precision gearhead brand within the Parker Hannifin family. The PS180 frame class supports rated input speeds up to 3,000 RPM with maximum input speeds higher, per published Parker specifications. Over 97% efficiency is published for the PS series helical design. MPN PS180-005-SH. Motor adapter part number MT180-002.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-767\u003c\/p\u003e","brand":"Parker Hannifin","offers":[{"title":"Default Title","offer_id":48916797817072,"sku":"m00767","price":1149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/0466C0F2-30FE-4A27-994C-2FC3801CC0D3.jpg?v=1772122587"},{"product_id":"fanuc-ge-fanuc-ac-servo-motor-a06b-0151-b0757008-3-kw-1200-rpm-0226-768","title":"Fanuc (GE Fanuc) AC Servo Motor A06B-0151-B075#7008 - 3 kW 1200 RPM","description":"\u003cp\u003eThe Fanuc Alpha series A06B-0151-B075#7008 is a three-phase AC servo motor rated at 3.3 kW continuous output at 1200 RPM. Manufactured by Fanuc Ltd in Yamanashi, Japan, this motor carries model designation Alpha 30\/1200 and was produced under motor spec A06B-0151-B075#7008. The nameplate lists an input voltage of 191 V AC, a current draw of 11 A, and an operating frequency of 80 Hz. Permanent magnet field voltage is rated at 200 V inverter. Stall torque is 30 Nm at a stall current of 13 A. Winding connection is wye (Y) configuration with Class F insulation. The motor is equipped with two rear-mounted connectors: one for the A64 pulse encoder and one for power, consistent with the #7008 suffix designation indicating a straight keyed shaft configuration. The motor body is constructed of cast aluminum with a square flange mounting face and a cylindrical output shaft. This unit is compatible with Fanuc Alpha series servo amplifiers and is commonly found in CNC machine tool axis and spindle applications. Serial number C996A2250 is visible on the nameplate, with a manufacturing date of June 1999. The manual reference number listed is B-65142E.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-768\u003c\/p\u003e","brand":"Fanuc (GE Fanuc)","offers":[{"title":"Default Title","offer_id":48916824490224,"sku":"m00768","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/EC8262E4-6B91-4916-B20D-3C7412DED326.jpg?v=1772123499"},{"product_id":"ge-fanuc-ac-servo-motor-a06b-0158-b0757008-6-kw-2000-rpm-0226-769","title":"GE Fanuc AC Servo Motor A06B-0158-B075#7008 - 6 kW 2000 RPM","description":"\u003cp\u003eUsed in CNC machining centers and large-format machine tools, the GE Fanuc Alpha 40\/2000 AC servo motor carries part number A06B-0158-B075#7008 and is part of the red cap 0158 Alpha series. Rated at 7.3 kW continuous output, this motor operates on a three-phase 184V inverter supply at 133 Hz with a maximum speed of 2000 RPM and a stall torque of 56 Nm. Current draw is rated at 25 amps. The nameplate confirms IEC 34-1\/A2:1989 compliance, Class F insulation, and a permanent magnet field configuration. Two radial cooling fans are mounted in series on the front face, which is characteristic of the 0158 Alpha fan-motor series. The shaft is a straight keyed configuration as indicated by the #7008 suffix, with no holding brake. A FANUC Alpha A64 pulsecoder is mounted on the rear of the motor for position and velocity feedback, making this unit compatible with FANUC axis drive modules in the A06B-6079-H1xx and A06B-6096-H1xx families. The serial number is C98YG0875 and the manufacture date is September 2005. This motor is commonly used as a direct replacement for other A06B-0158-B075 variants on horizontal and vertical machining centers equipped with FANUC CNC systems.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-769\u003c\/p\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":48916842316016,"sku":"m00769","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/CB040F8A-1071-4C28-90ED-DC6D3B4518DB.jpg?v=1772123674"},{"product_id":"marathon-electric-inverter-duty-ac-motor-y1372-184thfw7726-5-hp-1800-rpm-0226-770","title":"Marathon Electric Inverter Duty AC Motor Y1372 \/ 184THFW7726 - 5 HP 1800 RPM","description":"\u003cp\u003eUsed in machine tool, conveyor, and variable speed drive applications, the Marathon Electric Y1372 is a three-phase, inverter duty AC motor rated at 5 HP and 3.70 kW continuous output. The nameplate lists a rated speed of 1760 RPM at 60 Hz with a voltage configuration of 230\/460 V and full load amps of 13\/6.5. The motor is built on a NEMA 184TC frame with a C-face footed mounting configuration. Enclosure type is TEFO (Totally Enclosed Fan Over) per the nameplate designation, with an IP43 rating. Insulation is Class H, and service factor is 1.0. The motor is three-phase, 4-pole design with a 1.0 service factor and no thermal overload protector. Bearings are identified on the nameplate as 6205 (opposite drive end) and 6206 (drive end), lubricated with Polyrex EM grease. Catalog number is Y1372, and the model number is listed as MVA184THFW7726AA M on the nameplate, consistent with the Marathon MicroMAX inverter duty product line. This motor was manufactured by Marathon Electric, a Regal Beloit company, in Wausau, Wisconsin, and assembled in Mexico. It carries CSA, UL, and CE certifications as indicated by the visible markings on the nameplate. Drive end and opposite drive end are cast iron construction with a rolled steel housing.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-770\u003c\/p\u003e","brand":"Marathon Electric","offers":[{"title":"Default Title","offer_id":48916852637936,"sku":"m00770","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/AE4AF553-C9BB-4A62-BE51-09374CE9513E.jpg?v=1772123829"},{"product_id":"allen-bradley-ac-servo-motor-1326ab-b3e-11-4-kw-3000-rpm-0226-771","title":"Allen-Bradley AC Servo Motor 1326AB-B3E-11 - 4 kW 3000 RPM","description":"\u003cp\u003eThe Allen-Bradley 1326AB-B3E-11 is a Bulletin 1326 AC servo motor manufactured by Allen-Bradley, a Rockwell International Company, and made in the USA. The nameplate lists a maximum continuous output power of 3.8 kW at 40 degrees C, a maximum speed of 3000 RPM at 40 degrees C, and a maximum continuous stall torque of 153 lb. in. at 40 degrees C. Maximum continuous RMS amperes are rated at 24.6 A at 40 degrees C, and terminal resistance is listed as 0.183 ohms at 25 degrees C. The part number is 1326AB-B3E-11, internal part number 122250, with a date code of 8915. No brake is installed on this unit as indicated by \"NA\" in the brake field on the nameplate. Two circular connector ports are present on the motor end cap, consistent with the 1326AB series configuration for separate power and feedback connections. The 1326AB series uses a brushless resolver to supply position, velocity, and commutation feedback. This motor is part of the discontinued 1326AB AC servo motor series and is commonly used as a replacement or spare in legacy Allen-Bradley servo system installations. It is compatible with 1391 AC servo controllers per Allen-Bradley published documentation.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-771\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":48916861944048,"sku":"m00771","price":829.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/00114DE8-F89E-470B-8320-D819CF454792.jpg?v=1772123985"},{"product_id":"elektrim-ac-motor-20nfm-3-5-36-5-hp-3600-rpm-0226-794","title":"Elektrim AC Motor 20NFM-3-5-36 - 5 HP 3600 RPM","description":"\u003cp\u003eUsed in pumps, compressors, fans, and general industrial machinery, the Elektrim 20NFM-3-5-36 is a 5 HP NEMA Premium Efficiency three-phase AC motor built on a 184T frame. Manufactured in Poland by the Cantoni Group under the Elektrim brand, this motor carries a TEFC (Totally Enclosed Fan Cooled) enclosure with an IP55 rating, making it suitable for environments with exposure to dust and moisture. Nameplate data confirms operation at 60Hz with a rated speed of 3535 RPM, dual voltage capability at 230\/460V, and full load amperage of 12.4\/6.2A. The motor also carries 50Hz ratings of 2910 RPM at 380V. Insulation class is F with a maximum ambient temperature of 40 degrees C. The service factor is rated at 1.4 at 60Hz, a standout specification for this series. Design is NEMA Design A, continuous duty. Bearings are specified on the nameplate as 6306 2Z C3. The motor is equipped with VPI (Vacuum Pressure Impregnation) of the windings and carries both CSA and UL listings. Part number 20NFM-3-5-36 is the OEM designation as shown on the nameplate. The 184T frame follows standard NEMA mounting dimensions for direct replacement compatibility.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-794\u003c\/p\u003e","brand":"Elektrim","offers":[{"title":"Default Title","offer_id":48919609704688,"sku":"m00794","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/1C82F56F-3F6C-4340-BD38-F01215EEE09E.jpg?v=1772211385"},{"product_id":"dayton-ac-motor-48zj88-2-hp-1800-rpm-0226-795","title":"Dayton AC Motor 48ZJ88 - 2 HP 1800 RPM","description":"\u003cp\u003eUsed in general industrial, HVAC, pump, fan, and conveyor applications, the Dayton 48ZJ88 is a 1.5 HP three-phase NEMA Premium efficiency AC motor built to NEMA frame 56H specifications. It operates on 208-230\/460V AC at 60 Hz, with full load amps of 4.5\/4.3\/2.1 A, and carries a service factor of 1.25. The motor is rated for continuous duty with a nameplate speed of 1,755 RPM and a Class F insulation rating. Enclosure type is TEFC (Totally Enclosed Fan-Cooled), suitable for dirty or wet environments where the motor must be protected from airborne contaminants. The unit is inverter rated and labeled for use with variable torque drives at a 20:1 speed range and constant torque drives at a 4:1 range, as shown on the nameplate sticker. Frame material is rolled steel with a 5\/8 in. keyed shaft. The motor is identified by part number 48ZJ88 and carries a CC 030A designation consistent with NEMA Premium efficiency requirements. Shaft end bearing is 6205-2Z-J\/C3 and opposite end bearing is 6203-2Z-J\/C3 as confirmed on the nameplate. Manufactured for Dayton Electric Mfg. Co., Lake Forest, IL 60045 USA. Weight per nameplate is 30 lb.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0226-795\u003c\/p\u003e","brand":"Dayton","offers":[{"title":"Default Title","offer_id":48919700111600,"sku":"m00795","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/E18BA1E5-9A44-4830-AE1D-7AE63C873C6D.jpg?v=1772213694"},{"product_id":"fanuc-dc-servo-motor-model-20m-a06b-0652-series-3-kw-1500-rpm-0326-129","title":"Fanuc DC Servo Motor Model 20M \/ A06B-0652 Series - 3 kW 1500 RPM","description":"\u003cp\u003eUsed in CNC machining centers and lathes equipped with legacy FANUC CNC systems, the FANUC DC Servo Motor Model 20M belongs to the A06B-0652 series of axis drive motors produced for FANUC 6 and early FANUC 11 control platforms. This motor features the characteristic teal cast iron housing associated with the FANUC DC servo M series, a square bolt-on mounting flange, a large-diameter octagonal rear face with multi-bolt pattern, and a five-pin circular military-style connector for power and feedback connections. A timing belt pulley is installed on the output shaft, indicating prior use in a belt-drive axis configuration. Published specifications for the Model 20M establish a continuous stall torque of 23 Nm, a rated speed of 1500 RPM, a DC bus voltage of 213V, and a rated current of 18A. A label on the motor body reads Repaired By FANUC USA, 1331 Greenleaf Ave., Elk Grove Village, IL 60007, confirming the unit was serviced through the FANUC USA factory repair program at some point during its service life. The original nameplate is covered by an opaque sticker, and the exact type number suffix cannot be confirmed visually. Compatible with FANUC DC servo drives from the same era, including the A06B-6047 and related velocity control units. Weighs approximately 55 to 65 lbs bare based on published 20M dimensional data.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-129\u003c\/p\u003e","brand":"Fanuc","offers":[{"title":"Default Title","offer_id":48937598419184,"sku":"m00129","price":669.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1407.jpg?v=1772650212"},{"product_id":"fanuc-ac-servo-motor-a06b-1-kw-900-rpm-0326-131","title":"Fanuc AC Servo Motor A06B - 1 kW 900 RPM","description":"\u003cp\u003eA servo motor from FANUC, one of the most recognized names in CNC motion control, this unit features the distinctive teal body and red plastic encoder end cap consistent with the FANUC AC S series and early AC series servo motors. The rear-mounted red cap houses a pulsecoder feedback device, and the output end features a splined shaft with a square flange mounting face. This form factor is commonly found on CNC machining centers, lathes, and milling machines running FANUC 0, 6, 10, 11, and 15 series controls. The motor body is cast aluminum construction with integral mounting bosses. FANUC AC servo motors in this configuration are widely used as axis drive motors for X, Y, and Z positioning on a broad range of machine tool platforms. The A06B series type number format is standard for FANUC servo motors of this generation, with the middle digits identifying electrical specifications and frame size, and the suffix identifying shaft type and feedback configuration. The nameplate is not visible in the available photos and the specific model number and part number could not be confirmed. Buyers are encouraged to verify the A06B part number from the motor nameplate prior to installation or use as a replacement.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-131\u003c\/p\u003e","brand":"Fanuc","offers":[{"title":"Default Title","offer_id":48937598779632,"sku":"m00131","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/IMG_1417.jpg?v=1772650240"},{"product_id":"siemens-brushless-servo-motor-1ft5106-0af71-1-z-4-kw-3000-rpm-0326-832","title":"Siemens Brushless Servo Motor 1FT5106-0AF71-1-Z - 4 kW 3000 RPM","description":"\u003cp\u003eUsed in CNC machining centers and industrial automation systems requiring high-torque servo axis control, the Siemens 1FT5106-0AF71-1-Z is a 3-phase brushless permanent magnet servomotor from the SIMODRIVE 1FT5 series, made in Germany. The nameplate confirms a standstill torque (M0) of 45 Nm at 60K, a rated torque (MN) of 13 Nm at a rated speed of 3000 RPM, and a standstill current (I0) of 42.5 A at 100K class. Maximum speed is listed as 4500 RPM per nameplate data. The motor features IP 67 ingress protection rating and IM B5 flange mounting, making it suitable for demanding environments where dust and coolant exposure are concerns. Thermal protection is provided by an integrated PTC thermistor with Th.Cl. F classification. Feedback is supplied through an ROD 320 incremental encoder with 2000 pulses per revolution, mounted to the rear of the motor body. The unit carries serial number YF M813 1053 01 002 and conforms to EN 60034 standards. The 3D designation and 1FU1050-6MF reference data appear on the nameplate consistent with the Siemens SIMODRIVE 611 drive system compatibility documentation for this motor series. The motor body is constructed in a heavy-duty cast housing with a square front flange, central output shaft, and a lifting eye fitted to the frame.\u003c\/p\u003e\n\n\u003cp\u003eStock # 0326-832\u003c\/p\u003e","brand":"Siemens","offers":[{"title":"Default Title","offer_id":48937622536432,"sku":"m00832","price":3099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0797\/6648\/7280\/files\/FFB72227-B9C4-4695-9F28-F2F0A8B5696E.jpg?v=1772650871"}],"url":"https:\/\/mroexchange.com\/collections\/motors-drives.oembed?page=3","provider":"MRO Exchange","version":"1.0","type":"link"}